Summary of the content on the page No. 1
SATA PCI Express Adapter
PEXSATA22I
Summary of the content on the page No. 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no g
Summary of the content on the page No. 3
Instruction Manual Instruction Manual Table of Contents Introduction ................................................................................... 1 Package contents ........................................................................1 System Requirements .................................................................1 Installation ...................................................................................... 2 Driver Installation (Non-boot drives) ..........................
Summary of the content on the page No. 4
Instruction Manual Introduction Thank you for purchasing a StarTech.com SATA II PCI Express Adapter. Supporting SATA II data transfer speeds of up to 3.0 Gbps, this dual port SATA II PCI Express Card offers users a cost-effective solution for connecting additional SATA II drives and provides RAID capable operation. Features • Provides two internal SATA II connections • Supports two independent SATA II channels (separate logic and FIFO) • Supports Native Command Queue (NCQ) operation •
Summary of the content on the page No. 5
Instruction Manual Installation WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your card. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer cas
Summary of the content on the page No. 6
Instruction Manual your computer at the time of purchase. 3. Locate an empty PCI Express slot, removing the metal bracket covering the accompanying empty port/socket on the rear panel of the computer chassis. 4. Position the card above the open PCI Express slot, ensuring that the card is properly aligned with the slot. Insert the card firmly into the slot, distributing force evenly across the length of the board. Once inserted, secure the card into the adjoining socket (previously cover
Summary of the content on the page No. 7
Instruction Manual 3. In the right pane of the Computer Management window, click on SCSI and RAID Controllers. Here, you should find listed JMicron JMB36X RAID Controller and JMicron JMB36X RAID Processor, upon successful installation. Windows Vista™ Fresh Installation Follow the instructions in this section if you are performing a new (bootable) installation of Windows Vista™ on a drive attached to PEXSATA22I: 1. Shut down all power connected to the computer, as well as all devices c
Summary of the content on the page No. 8
Instruction Manual 8. Start the computer as you normally would to perform an operating system installation, ensuring that the Windows Vista™ installation CD/DVD is present in the drive, and the BIOS has been suitably adjusted to boot from the CD/DVD Drive. 9. When the Windows Install screen appears, fill in the necessary information and click Next. Follow the operating system instructions until a page appears asking “Where do you want to install Windows?”. From here, click on L
Summary of the content on the page No. 9
Instruction Manual the computer chassis. 4. Position the card above the open PCI Express slot, ensuring that the card is properly aligned with the slot. Insert the card firmly into the slot, distributing force evenly across the length of the board. Once inserted, secure the card into the adjoining socket (previously covered by metal bracket, on the rear panel of the computer chassis), using the correct size screw (if necessary, please consult documentation that accompanied
Summary of the content on the page No. 10
Instruction Manual Specifica tions Bus Interface PCI Express 1.0a (x1 connector) Chipset JMicron JMB363 Connectors 2 x SATA 7-pin male Maximum Data Transfer Rate 3Gbps Compatible Operating Systems Windows 2000/XP/Server 2003/ Vista/7 (32/64-bit), Linux Regulatory Certifications CE/FCC/ROHS Weight 44.2 g (1.42 oz ) Dimensions (L x W x H) 102 x 120 x 20mm (1.7 x 4.74 x .78”) 7
Summary of the content on the page No. 11
Instruction Manual Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a lifetime warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods note
Summary of the content on the page No. 12
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.com today for comp
