Summary of the content on the page No. 1
SY-6IZA
SY-6IZA-NA
Motherboard
Quick Start Guide
The SOYO CD Introduction
Onboard Sound Quick BIOS Hardware
Driver Installation Setup Installation
Summary of the content on the page No. 2
SOYO ™ SY-6IZA/6IZA-NA Motherboard Y * These specifications are subject to change without notice 2 6IZA/6IZA-NA Serial - Version 2.2- Edition: March 2000 "http://www.soyo.com.tw". on the Internet. The address is Web Site If you need any further information, please visit our document is subject to change without notice. however, no guarantee is given as to the correctness of the contents. The information in this has been carefully checked for reliability; installing the Motherboard. Information
Summary of the content on the page No. 3
SY-6IZA/6IZA-NA Quick Start Guide 1 Introduction 1 Congratulations on your purchase of the SY-6IZA/6IZA-NA Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-6IZA/6IZA-NA Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard. Unpac
Summary of the content on the page No. 4
SY-6IZA/6IZA-NA Quick Start Guide SY-6IZA Motherboard Layout e PS/2 KB PS/2 Mouse g Connector Connector X Power CPUFAN d 3 1 1 USB 1 JP 2 USB 2 1 S o T c COM 1 k e t 3 7 0 1 COM 2 FDC JOYSTICK 1 LINE-OUT 5 Intel LINE-IN 82443ZX 11 3 1 MIC JACK 1 Winbond 5 83977EF 1 2 3 -AW t M M M M M M 4 I I I 3 D D D L r AGP Slot 1 3V J5 J4 CODEC Lithium 44 7 Battery CDIN 11 1 5 3 r ES1373 r 1 AUDIO PCI 2 __ D + r _ o 3 S3 ++ D l O I 82371 EB k 1 B T TM h _ SB-LINK s r a (PC-PCI) l t N F + 1 1 Key
Summary of the content on the page No. 5
SY-6IZA/6IZA-NA Quick Start Guide SY-6IZA-NA Motherboard Layout e PS/2 KB PS/2 Mouse g Connector Connector X Power CPUFAN d 3 1 1 USB 1 2 JP USB 2 1 S o T c COM 1 k e t 3 7 0 1 COM 2 FDC IR1 5 Intel 82443ZX 11 3 1 IDE 2 IDE 1 1 Winbond 5 83977EF 1 2 3 -AW t M M M M M M I I I 4 3 D D D L r AGP Slot 1 3V Lithium Battery 1 35 CMOS Clear r 1 2 __ D + r _ o S3 ++ D Intel O I 82371 EB kKeyloc B PWRBT TM h _ SB-LINK s a (PC-PCI) r l tRese N F + 1 1 Key Features TM Ø Supports Intel Celero
Summary of the content on the page No. 6
SY-6IZA/6IZA-NA Quick Start Guide 2 Installation 2 To avoid damage to your Motherboard, follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold it by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket. Follow the
Summary of the content on the page No. 7
SY-6IZA/6IZA-NA Quick Start Guide Install the Motherboard Follow the steps below in order to perform the installation of your new SY-6IZA/6IZA-NA Motherboard. Install the CPU Record the working frequency of your CPU that should be clearly marked on the CPU cover. 300MHz (66 x 4.5) 333MHz (66 x 5.0) 366MHz (66 x 5.5) 400MHz (66 x 6.0) 433MHz (66 x 6.5) 466MHz (66 x7..0) 500MHz (66 x7.5) This Motherboard is designed to be able to support processors with 100MHz FSB. However, Socket 370 processors
Summary of the content on the page No. 8
SY-6IZA/6IZA-NA Quick Start Guide Make Connections to the Motherboard This section tells how to connect internal peripherals and power supply to the Motherboard. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on how to connect internal and external peripherals to your new SY- 6IZA/6IZA
Summary of the content on the page No. 9
SY-6IZA/6IZA-NA Quick Start Guide Configure Memory Your board comes with three DIMM sockets, providing support for up to 256MB of main memory using DIMM modules from 8MB to 128MB. 1 2 3 (having Set JP45 for power up FSB clock and AGP bus clock. JP45 is used to adjust AGP bus clock frequency depending on the value of the front side bus (FSB) clock, also the setting of the JP45 determines the power up FSB clock which will remain effective until the BIOS set the FSB clock to th
Summary of the content on the page No. 10
SY-6IZA/6IZA-NA Quick Start Guide Enable/Disable Power-On by Keyboard (JP1) You can choose to enable the Power-On by Keyboard function by shorting pin 2-3 on jumper JP1; otherwise, short pin 1-2 to disable this function. 3 3 2 2 1 1 Power Button Enable (JP8) Your system can be power on by either pressing a power button or typing in a password, which can be set in the BIOS SOYO COMBO Setup. To avoid being unable to power up the system due to of forgetting the password, you can place a jumper ca
Summary of the content on the page No. 11
SY-6IZA/6IZA-NA Quick Start Guide External Suspend Button (JP2) Some cases come with a suspend button, insert the plug into JP2. In addition to through this button, the system can also enter the suspend mode through your OS. Note: Suspend mode only functions if your Power Management mode is APM. Make sure that the BIOS setting for Power Management is APM. Windows 98 can be installed with ACPI Power Management (default is APM), in this case suspend mode will not function either. Clear CMOS Data
Summary of the content on the page No. 12
SY-6IZA/6IZA-NA Quick Start Guide 3 Quick BIOS Setup 3 This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award B
Summary of the content on the page No. 13
SY-6IZA/6IZA-NA Quick Start Guide 4 The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-6IZA/6IZA-NA Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Insert the SOYO CD into the CD-ROM drive The SOYO CD will
Summary of the content on the page No. 14
SY-6IZA/6IZA-NA Quick Start Guide The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file. Follo
Summary of the content on the page No. 15
SY-6IZA/6IZA-NA Quick Start Guide driver revision: Intel .inf utility for Win 95 Intel Bu s Master Drivers for Win 95 Intel BusMaster Drivers for Win NT Intel BusMaster Drivers for OS2T Creative Ensoniq Sound dirvers Winbond hardware doctor for Win 95/98 Cancel OK (Driver Installation Menu) A short description of all available drivers follows: Ø Intel Southbridge Drivers Because Windows 95 does not recognize the Southbridge of the newer Intel chipsets (TX, BX, ZX etc) this utility has to be ru
Summary of the content on the page No. 16
SY-6IZA/6IZA-NA Quick Start Guide Check the Latest Releases Click the 'Check the latest Releases' button to go the SOYO Website to automatically find the latest BIOS, manual and driver releases for your motherboard. This button will only work if your computer is connected to the internet through a network or modem connection. Make sure to get your modem connection up before clicking this button. Enter the SOYO CD Click the Enter SOYO CD button to enter the SOYO HTML database. The Start Up prog
Summary of the content on the page No. 17
SY-6IZA/6IZA-NA Quick Start Guide 5 Onboard Sound Driver Installation 5 Only the SY-6IZA comes with an integrated Sound chip on board. Therefore you can skip this chapter if you purchased the SY-6IZA-NA board. To install the audio drivers in Windows 95/98, insert the SOYO CD into your CD-ROM drive. It will auto-run (If not, run Cdstart.exe in the root of the CD). Now press the install the 6IZA drivers button, select ‘ Creative Ensoniq Sound drivers ’ and press ‘ OK ’ . The driver installati
Summary of the content on the page No. 18
SY-6IZA/6IZA-NA Quick Start Guide Uninstalling AudioPCI in Windows NT 4.0 To uninstall the software: 1. Click the [Start] button, point to Settings and click [Control Panel]. Double-click the Multimedia icon. 2. From the Audio Devices tabbed page, Select any existing audio devices and then click Remove. Click [Yes] when prompted to remove the driver. 3. Close the Multimedia Properties windows and restart your computer. Reinstalling the Audio Drivers From the Installation Disc You may want to rei
Summary of the content on the page No. 19
SY-6IZA/6IZA-NA Quick Start Guide Quick Trouble shoot tips ? 1. Press “ ” • • – 19 real hard, it should snap twice. You may have to unscrew card down into the socket did not get seated into the AGP slot fully and firmly. Please push your AGP card This is a common problem with AGP video cards. The reason is that your AGP card, it does not give me any video. Is my AGP slot bad? My PCI VGA card works fine with my system, but when I put in a new AGP correctly in its socket. is not seated One or
Summary of the content on the page No. 20
SY-6IZA/6IZA-NA Quick Start Guide 20 Audio Issues not properly recognize relatively new chipsets. install the south bridge driver from the SOYO CD, this is because Windows does has been installed correctly, then you need to If you are sure that the modem driver Why? modem to work. I have installed my modem drivers several times and I still cannot get my under integrated peripheral setup. What you need to do is to disable 'COM2' (or UART2 or serial port 2) in the bios my modem to work I get an
