Summary of the content on the page No. 1
SY-7IWM
Motherboard
Quick Start Guide
The SOYO CD
Quick BIOS Hardware Introduction
Setup Installation
Summary of the content on the page No. 2
SOYO ™ SY-7IWM Motherboard m y * These specifications are subject to amend without notice 2 7IWM Serial - Version 1.1 - Edition: December 2000 "http://www.soyo.com.tw". on the Internet. The address is Web Site For further information, please visit our is subject to amend without notice. to the correctness of the contents there is no guarantee given. The information in this document has been carefully checked for reliability; however, the Motherboard. Information in this guide This Quick Start
Summary of the content on the page No. 3
1 Introduction 1 Congratulations on your purchase of the SY-7IWM Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-7IWM Motherboard Users ’ Guide that came with your Motherboard. Unpacking When unpacking the Motherboard, check for the following items: u The SY-7IWM FW82810E AGP/PCI/AMR Motherboard u
Summary of the content on the page No. 4
SY-7IWM Motherboard Layout B e Nr Connector Connector 1 USB 1 USB 2 0 PRT 2 1 USB 3 ® 5 l E 1 1 VGA M C K MM LINE-OUT dWinbon W83627HF LINE-IN W 4 MIC JACK L 1 2 3 Header 11 M M M 1 3 IDE 2 IDE 1 1IR M M M I I I RAM 5 D D D 1 4 1 Intel N 1 82802AB 4MB C AC97 _ _ 4 J10 2 + Intel r AUX-IN I Fw82801_ + + 1 14 1 k PHONE-IN3 PWRBT _ 3V r m t LED 1+ Battery JP5 3 1 N r r 4 Introduction Jumpe CMOS Clea CHAFA Rese Lithiu Powe PCI Slot # Keyloc J1 (Optional) LED ACP Speake LED PCI Slot # HDD C
Summary of the content on the page No. 5
Key Features Ø Supports Intel® processors Ø Fan speed control - FSB 66MHz: Celeron™(400-700MHz) Ø Battery Low voltage Detect - FSB 100MHz: Pentium® III (500- 850MHz) Ø Support 7 sets of voltage monitoring - FSB 133MHz: Pentium® III (533MHz- Ø Supports multiple-boot function 1.13GHz) Ø Supports 66/100/133 MHz Front Side Ø Y2K Complaint Bus Frequency Ø Supports Audio Modem Riser slot (AMR Ø Auto-detect CPU voltage 1.0 compliant) * Ø 3D AGP Accelerator integrated into Ø 3 x 32-bit bus master PCI
Summary of the content on the page No. 6
2 Installation 2 To avoid damage to your Motherboard, please follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears to be loose, press carefully to seat it firmly in its socket. Follow the direct
Summary of the content on the page No. 7
Install the Motherboard To perform the installation of your new SY-7IWM Motherboard, follow the steps below: CPU Installation Record the working frequency of your CPU that should be clearly marked on the CPU cover. FSB 66MHz FSB 100MHz FSB 133MHz TM To mount the Pentium® & Celeron processor that you have purchased separately, follow these instructions. 1 2 0 7 3 t e k c o S 0 7 3 t e k c o S 3 4 0 0 7 7 3 3 t t e e k k c c o o S S 1. Lift the socket handle up to a vertical position.
Summary of the content on the page No. 8
Connections to the Motherboard This section tells how to connect internal peripherals and the power supply to the Motherboard. The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on connecting internal and external peripherals to your new SY-7IWM Motherboard, please refer to SY-7IWM M
Summary of the content on the page No. 9
Configure Memory Your board comes with three DIMM sockets, and provides support up to 512MB main memory using DIMM modules from 8MB to 256MB. 1 2 MHz 2. y y CMOS Clear (JP5) In some cases the CMOS memory may contain wrong data, follow the steps below to clear CMOS memory. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper 1. can be easily identified by its white colored cap. 2. Then put the jumper back to 1-2 to allow writing new of
Summary of the content on the page No. 10
3 Quick BIOS Setup 3 This Motherboard does not require any hardware jumpers to set the CPU operating frequency. Instead, CPU settings are software configurable through the BIOS [Soyo Combo Feature]. The [Soyo Combo Feature] menu combines the main parameters that you need to configure your system. They are all in one menu to enable a quick setup in BIOS. After completion of hardware installation, turn the power switch on, then press the key while the system diagnostic is checking to enter t
Summary of the content on the page No. 11
4 The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-7IWM Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Insert the SOYO CD into the CD-ROM drive If you use Windows NT, the SOYO-CD will not detect your mother
Summary of the content on the page No. 12
The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file. Follow the instructions on your scree
Summary of the content on the page No. 13
driver revision: Intel Whitney VGA Drivers for Win 9x Intel Whitney VGA Drivers for NT 4.0 Intel .inf utility for Win 9x/2000 Intel Whitney security utility for Win 9x/NT Intel Ultra ATA Storage Driver for Win 98/98SE/98ME/NT/2000 Sigmatel Audio Application Sigmatel Staggato Gold Application for Win 95/98/NT Whitney Winbond hardware doctor for win 95/98 Cancel OK (Driver Installation Menu) A short description of all available drivers follows: Ø Ø Ø Ø Intel . T f Ø The Intel Ultra ATA
Summary of the content on the page No. 14
Ø Ø Your motherboard comes with a hardware monitoring IC. By installing this utility Temperature, Fan speed and Voltages can be monitored. It is also possible to set alarms when current system values exceed or fall below pre-set values. Select which driver you want to install and click OK, or click Cancel to abort the driver installation and return to the main menu. Note: Once you have selected a driver, the system will automatically exit the SOYO CD to begin the driver installation program.
Summary of the content on the page No. 15
? 1. Press “ ” • • – 15 card by using too much force. the AGP card to allow the card to go further down. Do take care not to damage the real hard, it should snap twice. You may have to unscrew card down into the socket did not get seated into the AGP slot fully and firmly. Please push your AGP card This is a common problem with AGP video cards. The reason is that your AGP card, it does not give me any video. Is my AGP slot bad? My PCI VGA card works fine with my system, but when I put in a n
Summary of the content on the page No. 16
16 is connected to the speaker out port on your sound card. Please make sure the speaker I do not get any sound from my sound card. What could be wrong? Audio Issues not properly recognize relatively new chipsets. install the south bridge driver from the SOYO CD, this is because Windows does has been installed correctly, then you need to If you are sure that the modem driver Why? modem to work. I have installed my modem drivers several times and I still cannot get my under integrated peripher
Summary of the content on the page No. 17
’ 17 http://www.soyo.com Please make sure you have the latest bios and driver from the SOYO web site at: I can not get my board to run properly. is enabled in the bios. Cyrix CPU, make sure the 'linear burst function' peripherals one by one to identify which one causes the lockup. If you are running a floppy drive controller, and see if it can boot from floppy. Then put back the the bios and exit. Next, unplug all other add-on cards except the video card and Please clear the CMOS via JP5 then c
Summary of the content on the page No. 18
n n . , : s : : l 18 support@soyo.n : ail Em Fax: +31-79-3637575 support@soyo.co.uk E-Mail: Tel : +31-79-3637500 )181 569 4134 Fax: +44 (0 Technical Support: Tel : +44 (0)181 569 4111 Technical Support: sales@soyo.nl : ail Em Fax: +31-79-3637575 sales@soyo.co.uk E-mail: Tel: +31-69-3637500 )181 569 4134 Fax: +44 (0 Sales Tel : +44 (0)181 569 4111 europe.com Sales www.soyo- , www.soyo.nl Web Site: www.soyo.co.uk Web Site: Germany and United Kingdom Republic of Ireland Region Covered: E
Summary of the content on the page No. 19
u ) S : T F E - 19 support@soyo.co.jp E-mail: Fax: 81-3-33682199 81-3-33682188 : Tel Technical Support: soyo-jpn@soyo.co.jp E-mail: Fax: 81-3-33682199 81-3-33682188 : Tel Sales: info@soyo.co.kr e-mail : www.soyo.co.jp Web site: fax : 82-2-712-5853 tel : 82-2-717-4392 Japan Covered: Region Technical Support: SOYO Japan mail : soyo@soyo.co.kr soyo@public.bta.net.cn E-mail: ax : 82-2-704-2619 fax: 86-10-62510388 el : 82-2-716-2850 : 86-10-62510089 Tel ales Technical Support: www.soyo.co.kr W
Summary of the content on the page No. 20
SERIAL SY-7IWM Version 1.1 Edition: December 2000
