Renesas M38C59T-RLFS user manual

Summary of the content on the page No. 1

M38C59T-RLFS
Emulator MCU Board for 38C5 Group
User’s Manual

Keep safety first in your circuit designs!
Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appr

Summary of the content on the page No. 2

1. Outline The M38C59T-RLFS is an emulator MCU board for the 38C5 Group. M38C59T-RLFS 2. Package Components (See Figure 1) (1) M38C59T-RLFS ......................................................... 1 pc. (2) M3T-F160-80LCC converter board (preinstalled) ...... 1 pc. M3T-F160-80LCC (3) M38C59T-RLFS User's Manual (This manual) .......... 1 pc. Figure 1 Package components of the M38C59T-RLFS (4) M38C59T-RLFS User's Manual (Japanese)................ 1 pc. Emulator 3. Specif

Summary of the content on the page No. 3

5. Oscillator Circuit (See Figure 3) This product has two oscillator circuit patterns for the main clock XIN and sub-clock XCIN. Select one of them according to the oscillator circuitry of the target system. (1) When using the internal oscillator circuit of the MCU: The oscillator circuit on the target system may not oscillate because a converter board is used between the emulator MCU and the target system. In this case, set the jumper switch to INT and mount an oscillator circuit on

Summary of the content on the page No. 4

7. Precautions IMPORTANT Notes on This Product: We cannot accept any request for repair. When using the oscillator circuit on the M38C59T-RLFS, check the output waveform of pins X and X by an OUT COUT oscilloscope. When mounting an oscillator circuit on the M38C59T-RLFS, make sure that 2 mm or more of a DIP pin does not appear on the rear face (solder side). It may be short-circuited with the DIP pin of the converter board. For inquiries about the product or the contents of this