Summary of the content on the page No. 1
REJ10B0223-0140
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual
M3A-2154G52B
All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Technology Corp. without notice. Please review the latest information published
by Renesas Technology Corp. through various means, including the Renesas Technology
Corp. website (http://www.renesas.com).
Rev
Summary of the content on the page No. 2
Notes regarding these materials 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this do
Summary of the content on the page No. 3
Precautions on Using The Product Described Herein 1. The product described herein should be used in combination with the parts included with the starter kit. If the product is operated in combination with any other item, its operation cannot be guaranteed. Nor will requests for help or suggestion be answered. 2. The product described herein was prepared for program development or evaluation purposes. The product cannot be used for the mass production. 3. Renesas Technology Corporation
Summary of the content on the page No. 4
Preface Thank you very much for purchasing the 32185/32186/32192/32195/32196 Group Starter Kits, the M3A-2154G52B. This manual describes how to set up the hardware and software products included with the 32185/32186/32192/32195/32196 Group Starter Kit and the precautions to be observed when using those products. For details about the 32192/321296 or 32186 Group hardware and software products and development support tools, refer to the user’s manuals and related documentation suppl
Summary of the content on the page No. 5
Contents 1. Overview........................................................................................................................1 1.1 Outline of the Starter Kit ...................................................................................................................... 1 1.2 System Configuration.......................................................................................................................... 2 2. Contents of the Product Package ............
Summary of the content on the page No. 6
Appendix 2 Part List........................................................................................................31 Appendix 3 M3A-2154G02A Product Standards .............................................................33 1. Overview......................................................................................................................34 1.1 Outline of the Product .................................................................................................
Summary of the content on the page No. 7
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 1. Overview 1.1 Outline of the Starter Kit The M3A-2154G52B Starter Kit consists of M3A-2154G02A (32185/32186/32192/32195/32196 Group Evaluation Board; hereafter called the M3A-2154 Evaluation Board), M3T-PD32RM (Emulator Debugger for M32100T-EZ-E) and M3T-CC32R (Cross Tool Kit for the M32R Family; trial version). This is an evaluation k
Summary of the content on the page No. 8
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 1.2 System Configuration Figure 1.1 and Figure 1.2 below show system configurations of M3A-2154G52B connected to an included emulator, and M3A-2154G02A by itself, respectively. USB cable M3T-CC32R 10-pin flat cable (included with M32100T-EZ-E) (included with M32100T-EZ-E) M3T-PD32RM XCN1 M3A-2154G02A (32185/32186/32192/ 32195/32196 Group Host PC CN2 evaluation board) M32100T-EZ-E (required on
Summary of the content on the page No. 9
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 2. Contents of the Product Package This chapter shows the contents of the Starter Kit product package. When unpacking, check to see that all items are included with your package. 2.1 Packaged Product Items Table 2.1 shows the contents of the Starter Kit product package. Table 2.1 Packaged Contents of 32185/32186/32192/32195/32196 Group Starter Kit Packaged product name Outline of product Quantity 32185/321
Summary of the content on the page No. 10
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 2.2 Contents of CD-ROM The CD-ROM contains the software, manuals, various data sheets, and sample programs which are needed for you to use the Starter Kit. When using the technical contents of the CD-ROM such as product data, diagrams, and tables or the programs and algorithms also included in the CD-ROM for your application, please be sure to evaluate those technical contents, programs, and algorithms as the wh
Summary of the content on the page No. 11
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 3. Usage Precautions 3.1 Guaranteed Scope of the Starter Kit The Starter Kit was developed for users to trial the 32185/32186/32192/32195/32196 Group microcomputer specifications and development environment. Therefore, the results arising from the use of the Starter Kit are not guaranteed. When developing/debugging a system product using one of the M32R Family microcomputers, please be sure to use official dev
Summary of the content on the page No. 12
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 3.4 About M3T-PD32RM The following describes precautions to be observed when using M3T-PD32RM. 3.4.1 Operating Manuals To use M3T-PD32RM of M3A-2154G52B, see the manuals shown below. - M3T-PD32RM release notes - PD32RM Help 3.4.2 About Break Operation M3T-PD32RM uses the M32R core’s internal debug circuit (SDI) to realize break functions. For this reason, the break functions of M3T-PD32RM behave different
Summary of the content on the page No. 13
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B (5) About hardware break Debug functions of M3T-PD32RM are realized by using the M32R core’s internal debug circuit (SDI), and not by using the emulator’s hardware resources based on bus signals and debug information from the MCU as in conventional emulators. The pre-execution PC break, post-execution PC break, and chip break alluses this internal debug circuit (SDI).Because the M3T-PD32RM does not have trace pi
Summary of the content on the page No. 14
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 3.5 About Evaluation Board When the evaluation board does not start operation after supplied power, check the following points. 3.5.1 Contact failure of IC Socket Oscillation or thermal expansion may cause a poor connection between microcomputers and IC socket on the Evaluation Board. Follow the steps below. - Screw down the top cover of IC socket with setscrews at four corners. The tightening torque shall
Summary of the content on the page No. 15
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 4. Starter Kit Usage Conditions The following shows the conditions under which the Starter Kit can be used. 4.1 Ambient Conditions Table 4.1 shows the ambient conditions under which the Starter Kit can be used. Table 4.1 Operating Environment Symbol Parameter Rated value Remarks o o Topr Operating ambient temperature 5 C to 35 C No dewdrops allowed. Corrosive o o Tstr Storage ambient temperature 0 C to 60
Summary of the content on the page No. 16
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 5. Hardware Setup This chapter describes how to set up the hardware components necessary to use the Starter Kit. Table 5.1 and Table 5.2 show how to set up the hardware components. Table 5.1 Hardware Setup Procedure When using the evaluation Setup Procedure When connected to the emulator board by itself Set the emulator 1st (Refer to 5.1.1) — Connect the host PC and emulator 2nd (Refer to 5.1.1) — Set the
Summary of the content on the page No. 17
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 5.1.2 M3A-2154 Evaluation Board Power Supply and Setting The following shows how to set the M3A-2154 Evaluation Board. Use a 5V DC power supply to feed power to the M3A-2154 Evaluation Board. Use included 5V power supply cable to connect the 5V DC power supply and CN2 connector included with the M3A-2154 Evaluation Board. The Connecting when Feeding Power to the M3A-2154 Evaluation Board is shown in Figure 5.
Summary of the content on the page No. 18
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 5.2 Hardware Setup when the Evaluation Board by Itself in Use 5.2.1 M3A-2154 Evaluation Board Power Supply and Settings The following shows how to set the M3A-2154 Evaluation Board. Use a 5V DC power supply to feed power to the M3A-2154 Evaluation Board. Use an included 5V power supply cable to connect the 5V DC power supply and CN2 connector included with the M3A-2154 Evaluation Board. The Connecting when Fee
Summary of the content on the page No. 19
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 6. Software Setup 6.1 M3T-PD32RM M3T-PD32RM is the debugger software that controls M32100T-EZ-E from the host PC. 6.1.1 Installing M3T-PD32RM [Notes] Make sure that the installer is executed by one who is authorized as an Administrator when Windows 2000/XP is used as an operating system of the host machine. No one but the user who has the authority of an Administrator can install M3T-PD32RM. (1) Run pd32
Summary of the content on the page No. 20
32185/32186/32192/32195/32196 Group Starter Kit User’s Manual M3A-2154G52B 6.1.2 Starting M3T-PD32RM Before starting M3T-PD32RM, make sure the hardware components have been set up in accordance with the instructions in 5.1 M3A-2154 Evaluation Board Hardware Setup, and that the Starter Kit hardware system (M3A-2154 Evaluation Board and M32100T-EZ-E) have been powered on. Make sure that M3T-PD32RM cannot be started unless the power to the hardware system is turned on. To start M3T-PD32
