Summary of the content on the page No. 1
OKI 70037401,
70037501 & 70037601
Memory DIMM
Installation Instructions
Summary of the content on the page No. 2
Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control. Oki Data also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by Oki Data.
Summary of the content on the page No. 3
Getting Started The printers have four sockets for memory DIMM boards. You can expand the printer's memory up to 1 GB by installing four 256-MB DIMMs. To achieve the 1 GB memory in most models, you will need to replace the DIMM(s) provided with 256 MB DIMMs: Model Memory Provided C7200 64 MB C7200n 64 MB C7400n 128 MB C7400dxn 256 MB C9200 128 MB C9200n 128 MB C9200dxn 192 MB (64 + 128 MB) C9400dxn 320 MB (64 + 256 MB) Caution! Circuit boards can be damaged by static electricity and rough handli
Summary of the content on the page No. 4
Prepare the Printer 1 Turn the printer off and unplug the power cord. 2 Detach the interface cable from the printer. 3 Remove and save the thumbscrew at the top and bottom which hold the control board in place. C7000 Series C9000 Series 4
Summary of the content on the page No. 5
4 Grasp the control board, loosen it by wiggling it back and forth, and slide it out of the printer. C7000 Series C9000 Series 5
Summary of the content on the page No. 6
Install the DIMM(s) 1 Locate the DIMM sockets (1) on the control board. DIMMs must be installed in the socket number sequence 1-3-2-4. ! Socket numbers (1) are located at the end of the sockets nearest the front of the board. 6
Summary of the content on the page No. 7
2 Push out the white lock tabs at either end of the DIMM socket. Caution! Circuit boards can be damaged by static electricity and rough handling. To avoid damage, ground yourself before handling DIMMs. 3 Remove the DIMM from its shipping package. 4 Align the DIMM with the narrow strip (1) on its metallic contact edge toward the front of the control board, then carefully insert the DIMM in the socket. Press down firmly, until you feel the board engage the connector, then make sure the white tabs
Summary of the content on the page No. 8
Complete the Installation 1 Align the bottom of the control board with the track in the printer and slide it back into place. C7000 Series C9000 Series 8
Summary of the content on the page No. 9
2 Reinstall the thumbscrews at the top and bottom of the board. C7000 Series C9000 Series 3 Reattach the computer interface cable. 4 Plug the power cord into the power outlet and turn the printer on. 9
Summary of the content on the page No. 10
Check for Proper Installation Generate a MenuMap printout and check to be sure that the DIMMs are properly installed: 1 Press MENU once or twice until INFORMATION MENU appears on the display. 2 Press SELECT. PRINT MENU MAP appears on the display. 3 Press SELECT. The MenuMap prints. 4 Check the top of the MenuMap printout to verify that the DIMMs you installed are listed (they will appear as DIMMs). If the DIMM is not listed at the top of the MenuMap printout, remove the ! board and make sure the
Summary of the content on the page No. 11
Change the Memory Setting in the Driver(s) ® ® ® Windows Adobe PostScript Driver 1 Click Start fi Settings fi Printers. The Printers dialog box opens. 2 Right click the appropriate OKI (C7200, C7400, C9200 or C9400) PostScript driver icon, then click Properties. 3 Windows 2000 & NT 4.0: a Click the Device Settings tab. b Scroll down to Installable Options and click Memory Configuration. c Under Change ‘Memory Configuration’ Setting, click the total memory installed (original plus the memory you ju
Summary of the content on the page No. 12
® Macintosh Driver 1 Activate Chooser from the Apple menu. 2 Select LaserWriter 8. 3 Click Printer fi Setup. 4 Click Configure. 5 Change the Memory Configuration setting to match the total DIMM memory installed (original plus the new memory you just installed): 6 Click OK twice, then close Chooser. 12
Summary of the content on the page No. 13
Limited Warranty: United States & Canada Oki Data Americas, Inc. (Oki Data) warrants this OPTION to be free from defect in material and workmanship and will remedy any such defect according to the terms of this Limited Warranty. Oki Data will repair (or at its option, replace) at no charge, any defective part(s) of the OPTION for one (1) year from the date of purchase. This Limited Warranty extends to the original purchaser only. To make request or claim for service under this Limited Warranty t
Summary of the content on the page No. 14
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF ONE (1) YEAR. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. OKI DATA SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or cons
Summary of the content on the page No. 15
Oki Data Service Depot Information UNITED STATES CANADA Oki Data Americas, Inc. Oki Data Americas, Inc. 2020 Bishops Gate Blvd. 2735 Matheson Blvd. East, Unit 1 Mt. Laurel, NJ 08054 Mississauga, Ontario Canada L4W 4MB Tel: 1-800-654-3282 Tel: 800-654-3282 Fax: 1-856-222-5247 Fax: 905-238-4427 MEXICO BRAZIL Oki Data de Mexico, S.A. de C.V. Oki Data do Brasil, Ltda. Mariano Escobedo No. 748 - 8 Piso Rua Alexandre Dumas, 2220 - 8 andar Col Anzures, e.p. 11590 Chácara Sto Antonio Mexico, DF São Paul
Summary of the content on the page No. 16
Oki Data Americas, Inc. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Tel: (800) 654-3282 FAX: (856) 222-5320 http://www.okidata.com 58346602
