Summary of the content on the page No. 1
KA-MR100G_EN.book Page 1 Thursday, February 5, 2009 5:28 PM
Memory Recorder
INSTRUCTIONS
KA-MR100G
Thank you for purchasing this JVC product. Before
beginning to operate this unit, please read the
instructions carefully to ensure the best possible
performance.
For Customer Use:
Enter below the Serial No. which is located on the
body. Remain this information for future reference.
Model No. : KA-MR100G
Serial No. :
LST0838-001A
Summary of the content on the page No. 2
KA-MR100G_EN.book Page I Thursday, February 5, 2009 5:28 PM Getting Started FOR USA These aregeneral IMPORTANTSAFEGUARDS and certain items may not apply to all appliances. IMPORTANTSAFEGUARDS Readall of theseinstructions. 1. 2. Save theseinstructions for lateruse. 3. All warnings on the productand in the operating instructionsshouldbeadhered to. 4. Unplug thisappliancesystem from the wall outletbefore cleaning. Do notuse liquid cleaners oraerosol cleaners.Usea damp cloth for cleaning. Do notu
Summary of the content on the page No. 3
KA-MR100G_EN.book Page II Thursday, February 5, 2009 5:28 PM Safety Precautions POUR CANADA ATTENTION RISQUE D’ELECTROCUTION NE PAS OUVRIR FOR USA AND CANADA ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. CAUTION AUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTILISATEUR. RISK OF ELECTRIC SHOCK SE REFERER A UN AGENT QUALIFIE EN CAS DE DO NOT OPEN PROBLEME. CAUTION:TO REDUCE THE RISK OF ELECTRIC Le symbole de l’éclair à l’intérieur d’un triangle SHOCK. DO NOT
Summary of the content on the page No. 4
KA-MR100G_EN.book Page III Thursday, February 5, 2009 5:28 PM Getting Started Information for Users on Disposal of Old Equipment Safety Precautions [European Union] (continued) FOR EUROPE This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances and can be Attention: used in the following environments: Thissymbol isonly valid in the European ● Controlled EMC environ
Summary of the content on the page No. 5
KA-MR100G_EN.book Page 2 Thursday, February 5, 2009 5:28 PM Features Contents This is a memory recorder to record and play back HD-format video images and audio signals on an SxS memory card via the IEEE1394 Getting Started interface. Safety Precautions .......................................................................II Features .......................................................................................2 Use of SxS Memory Card Contents ......................................
Summary of the content on the page No. 6
KA-MR100G_EN.book Page 3 Thursday, February 5, 2009 5:28 PM Getting Started To load recorded video clips to Apple Inc.’s video editing software, Final Cut Pro, installation Precautions of the Final Cut Pro plugin software (JVC ProHD Log and Transfer Plugin) is required. This Storage and Operating Environment software can be found in the bundled CD-ROM. For procedures on how to install the software, Do not store this product in the following environments. please refer to the user’s
Summary of the content on the page No. 7
KA-MR100G_EN.book Page 4 Thursday, February 5, 2009 5:28 PM Name and Function of Parts N A B M L C K D J E I H F G A Access lamp G [NEXT] button Displays the status of the SxS memory card. ● Skips the currently selected clip to the next clip. ● When the clip selection screen is displayed, use this Light off : SxS memory card is not inserted button to select a clip to play back. Green light : Data in the card is not being accessed ● When the menu screen is displayed, use this button to sele
Summary of the content on the page No. 8
KA-MR100G_EN.book Page 5 Thursday, February 5, 2009 5:28 PM Getting Started Memo: ● A ANO CARDB message is shown when an SxS memory LCD Panel Displays card is not inserted. ● A ACARD PROTECTB mark is shown before the clip if the write-protect switch of the SxS memory card is turned on. During Recording or Stop Mode During Playback Mode Displays the status screen. Displays the clip selection screen. A G I N B C J
Summary of the content on the page No. 9
KA-MR100G_EN.book Page 6 Thursday, February 5, 2009 5:28 PM Setup 4 Attach the memory recorder to the KA-UM100G adapter Attaching the Memory Align the screw holes at the back of the KA-UM100G adapter Recorder to a Camcorder with the holes on the rubber sheet. Next, follow the steps illustrated in A _ D to attach the memory recorder. Check the IEEE1394 connection method before attaching B Set the hook to the guide the memory recorder to the camcorder. Memory recorder Hook For details, pl
Summary of the content on the page No. 10
KA-MR100G_EN.book Page 7 Thursday, February 5, 2009 5:28 PM Setup Turning Off the Power Connecting IEEE1394 1 Press and hold down the [POWER] button of the memory recorder for at least one second ● The power of the memory recorder turns off. There are 2 ways to connect the IEEE1394. Memo: ● You can turn off the power of the memory recorder using Connecting via IEEE1394 Cable the [POWER] switch of the camcorder by s
Summary of the content on the page No. 11
KA-MR100G_EN.book Page 8 Thursday, February 5, 2009 5:28 PM Removing the SxS Memory Card Inserting/Removing the Note: SxS Memory Card ● Do not remove the SxS memory card when the memory recorder lights up in red. Before removing the card, make Note: sure that the access lamp lights up in green color. ● This p
Summary of the content on the page No. 12
KA-MR100G_EN.book Page 9 Thursday, February 5, 2009 5:28 PM Operation Recording to the SxS Memory Card Recording Video Images of ● When the memory recorder is in the play mode, press the [STOP] button to stop playback. the Camcorder Using the ● There are three REC trigger buttons on the camcorder (on the lens, at the side, and on the handle). The REC trigger Memory Recorder button to enable recording to the SxS memory card varies according to the [1394 REC TRIGGER] settings. To record v
Summary of the content on the page No. 13
KA-MR100G_EN.book Page 10 Thursday, February 5, 2009 5:28 PM 2 Press the [NEXT] or [PREV] button to select a clip to play Playing Video Images ● Select a clip that has a check mark. Recorded in the Memory ● To play back a clip without a check mark, it is necessary to configure the camcorder and memory recorder according to the video format settings, which are displayed when the Recorder clip is selected. To play back video images recorded by the memory 3 Press the [PLAY/STILL] button to
Summary of the content on the page No. 14
KA-MR100G_EN.book Page 11 Thursday, February 5, 2009 5:28 PM Menu ● [NUMBER] of the [CLIP NAME] setting screen ● [FORMAT] and [RESTORE] of the [MEDIA] setting screen Setting the Menu Screen ● [ALL RESET] of the [OTHERS] setting screen Utility item being selected [MENU] button [INFO/CLR] button Execute with [INFO/CLR] button [PLAY/STILL] button [PREV]button [FWD] button Return to the menu screen without setting using [STOP] button [REV] button [STOP] button 2 Press the [INFO/CLR] button to ex
Summary of the content on the page No. 15
KA-MR100G_EN.book Page 12 Thursday, February 5, 2009 5:28 PM Menu Screen Configurations and Functions Values indicated in parentheses in the table below are default settings. Setting Item Setting Values Functions SYSTEM For setting the format of the video to be recorded or played back. Make sure that the settings are consistent with those of the camcorder. Otherwise, recording and playback cannot be executed. RESOLUTION (720), 1080 For setting the resolution. FRAME/RATE RESOLUTION: When 7
Summary of the content on the page No. 16
KA-MR100G_EN.book Page 13 Thursday, February 5, 2009 5:28 PM Menu Setting Item Setting Values Functions TC SET2 For presetting the time code generator of the memory recorder. TC PRESET (00:00:00:00) _ 23:59:59:29 The number of frames that can be specified are as shown below, depending on or the setting of the frame rate. (e.g., when the frame rate is 60, you can specify the (00:00:00:00) _ 23:59:59:24 number of frames up to a value of 58.) Frame rate 60 50 30 25 24 Number of frames 58 48 29
Summary of the content on the page No. 17
KA-MR100G_EN.book Page 14 Thursday, February 5, 2009 5:28 PM Others Card Error Messages Warning Messages When an SxS memory card incompatible with the memory recorder is detected, an AERROR CARD!B message and a message indicating the cause of the card error will appear When warning messages appear on the LCD panel, take the alternately at the first line of the LCD panel display. (For following actions. approximately two seconds) When an error message appears, take the following actions.
Summary of the content on the page No. 18
KA-MR100G_EN.book Page 15 Thursday, February 5, 2009 5:28 PM Others Troubleshooting Symptom Cause(s)Actions Refer to Power does not turn Power is supplied from the DC INPUT Attach the battery. The power of the memory recorder A Page 7 on terminal of the camcorder. cannot be supplied from the DC INPUT terminal of the camcorder. Only the power of the camcorder is turned It is necessary to turn on the power of the memory recorder A Page 7 AOnB. at the same time. Remaining battery level is insuf
Summary of the content on the page No. 19
KA-MR100G_EN.book Page 16 Thursday, February 5, 2009 5:28 PM Overall Specifications Power supply DC 12 V (DC 10.5 V to 17 V) Power consumption 6 W External 90 mm x 57 mm x 131 mm (W x D x H) dimensions Media slot Weight 0.42 kg Supported media SxS memory card Operating 0 C to 40 C Number of slot 1 slot temperature Interface ExpressCard/34-compliant Operating humidity 30 % to 80 % RH (supports only PCI Express, USB is not Storage -20 C to 60 C supported) temperature Video format Sto
Summary of the content on the page No. 20
KA-MR100G Memory Recorder KA-MR100G_EN.book Page 17 Thursday, February 5, 2009 5:28 PM UTC Time Difference Chart by Region Setting Values Time Zone Setting Values Time Zone UTC+14:00 UTC 00:00 Greenwich UTC+13:30 UTC-00:30 UTC+13:00 UTC-01:00 Azores UTC+12:30 UTC-01:30 UTC+12:00 New Zealand UTC-02:00 Mid-Atlantic UTC+11:30 Norfolk Island UTC-02:30 UTC+11:00 Solomon Islands UTC-03:00 Buenos Aires UTC+10:30 Lord Howe Is. UTC-03:30 Newfoundland UTC+10:00 Guam UTC-04:00 Halifax UTC+09:30 Darwin
