Summary of the content on the page No. 1
MAT-880
®
Socket 479 Pentium M
®
Intel 855GME 5.25” SBC
USER’S MANUAL
Version 1.0
Summary of the content on the page No. 2
Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Pentium are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Winbond is a registered trademark of Winbond Electronics Corporation. All other product names or trademarks are properties of their respective owners. ii MAT-880 User’s Manual
Summary of the content on the page No. 3
Table of Contents Introduction....................................................... 1 Product Description .......................................................... 1 Checklist .......................................................................... 2 MAT-880 Specifications ................................................... 3 Board Dimensions............................................................. 4 Installations....................................................... 5 Inst
Summary of the content on the page No. 4
This page is intentionally left blank. iv MAT-880 User’s Manual
Summary of the content on the page No. 5
INSTALLATIONS Introduction Product Description ® ® MAT-880 Pentium M 5.25” embedded board incorporates the Intel advanced 855GME Chipset that supports processors from 900MHz to 1.6MHz in both 478 or 479-ball Micro-FCBGA package with a front size bus of 400MHz. Graphics display functionality is provided by the integrated-chipset VGA controller that supports CRT display and LVDS interface with 24-bit panel specifications. Ethernet connectivity comes from the ICH4-integrated Ethern
Summary of the content on the page No. 6
INSTALLATIONS Checklist Your MAT-880 package should include the items listed below. · The MAT-880 Pentium M embedded board · This User’s Manual · 1 CD containing chipset drivers and flash memory utility · Optional cables such as: · 1 slim FDD Ribbon Cable · 1 Audio Cable · 2 IDE Ribbon Cables (40-pin & 44-pin) · 1 COM Port Cable · 1 Printer Port Cable · 1 PS/2 Keyboard/Mouse Cable · 1 VGA Cable 2 MAT-880 User’s Manual
Summary of the content on the page No. 7
INSTALLATIONS MAT-880 Specifications 5.25-inch Disk-Size Form Factor ® Intel Pentium M Processor, Ultra Low Voltage, at HFM CPU Type core frequency of 900 MHz ~ 1.6GHz, 478 or 479-ball Micro-FCBGA Package 0.700V~1.708V CPU Voltage 900M~1.7GHz System Speed 400MHz CPU Frequency APM1.2 Green /APM ® Intel 82855GME Chipset Chipset GMCH: 82855GME, 732-pin Micro-FCBGA ICH4: 82801DB, 421-pin BGA, FWH Award BIOS, supports ACPI function BIOS 1M Level 2 cache Cache ® In
Summary of the content on the page No. 8
INSTALLATIONS Board Dimensions 4 MAT-880 User’s Manual
Summary of the content on the page No. 9
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on MAT-880 in order to set up a workable system. The topics covered are: Installing the CPU ............................................................ 6 Installing the Memory....................................................... 7 Setting the Jumpers........................................................... 8 Connectors on MAT-880.................................................
Summary of the content on the page No. 10
INSTALLATIONS Installing the CPU ® MAT-880 board supports a Socket 479 processor socket for Intel ® ® Pentium M or Celeron M processors. The processor socket comes with a screw to secure the processor. As shown in the left picture below, loosen the screw first before inserting the processor. Place the processor into the socket by making sure the notch on the corner of the CPU corresponds with the notch on the inside of the socket. Once the processor has slide into the socket, fast
Summary of the content on the page No. 11
INSTALLATIONS Installing the Memory MAT-880 embedded board supports two DDR memory socket s for a maximum total memory of 2GB in DDR memory type. The memory module capacities supported are 64MB, 128MB, 256MB, 512MB and 1GB. The following table lists the supported DDR DIMM configurations. Intel 855GME supports configurations defined in the JEDEC DDR DIMM specification only (A,B,C). Non-JEDEC standard DIMMs such as double-sided x16 DDR SDRAM DIMMs are not supported. Supported DDRM
Summary of the content on the page No. 12
INSTALLATIONS Setting the Jumpers Jumpers are used on MAT-880 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on MAT-880 and their respective functions. Jumper Locations on IMAT-880..................................................9 Configuring the CPU Frequency ................................................10 JP1: LVDS Panel
Summary of the content on the page No. 13
INSTALLATIONS Jumper Locations on MAT-880 Jumpers on MAT-880............................................................. Page JP1: LVDS Panel Power Select.................................................. 10 JP2: Gigabit LAN Enable/Disable ............................................. 10 JP3: Compact Flash Slave/Master.............................................. 10 JP4: Clear CMOS Contents....................................................... 11 JP5, JP6, JP7: RS232/422/485 (COM
Summary of the content on the page No. 14
INSTALLATIONS Configuring the CPU Frequency The MAT-880 embedded board does not provide DIP switches to configure the processor speed (CPU frequency). JP1: LVDS Panel Power Select JP1 LVDS Panel Power 3.3V (default) 5V Note: The LVDS panel resolution can be configured in the BIOS Setup. JP2: Gigabit LAN Enable/Disable JP2 Gigabit LAN Enable Disable JP3: Compact Flash Slave/Master JP3 Compact Flash Slave Open Master Close 10 MAT
Summary of the content on the page No. 15
INSTALLATIONS JP4: Clear CMOS Contents Use JP4 to clear the CMOS contents. Note that the ATX-power connector should be disconnected from the board before clearing CMOS. JP4 Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear CMOS Short/Closed JP5, JP6, JP7: RS232/422/485 (COM2) Selection COM1, COM3, and COM4 are fixed for RS-232 use only. COM2 is selectable for RS232, RS-422 and RS-485. The following table describes
Summary of the content on the page No. 16
INSTALLATIONS JP9: COM2 RS232 +5V / +12V Power Setting Pin # Pin # Signal Name JP9 Signal Name 1 RI +12V 2 3 RI (default) RI (default) 4 5 RI +5V 6 COM2 Settings: Pin 1-2 short = +12V, Pin 5-6 short = +5V, Pin 3-4 short = standard COM port JP10: COM3 RS232 +5V / +12V Power Setting Pin # Pin # Signal Name JP10 Signal Name 1 RI +12V 2 3 RI (default) RI (default) 4 5 RI +5V 6 COM3 Settings: Pin 1-2 short = +12V, Pin 5-6 short = +5V, Pin 3-4 short = standard COM p
Summary of the content on the page No. 17
INSTALLATIONS JP16: Processor Operating Frequency JP16 CPU FSB 133MHz Open 100MHz Close MAT-880 User’s Manual 13
Summary of the content on the page No. 18
INSTALLATIONS Connectors on MAT-880 Connectors on MAT-880 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists connectors on MAT-880 and their respective functions. Connector Locations on MAT-880.............................................. 15 FAN1, FAN2: System Fan Power Connector..............................16 FAN3: CPU Fan Power Connector ........................................
Summary of the content on the page No. 19
INSTALLATIONS Connector Locations on MAT-880 Connector s on MAT-880................................................................... Page FAN1, FAN2: System Fan Power Connector ........................................ 16 FAN3: CPU Fan Power Connector ....................................................... 16 IDE1, IDE2: EIDE Connectors ............................................................. 16 J1: CD-In Audio Connector ..........................................................
Summary of the content on the page No. 20
INSTALLATIONS FAN1, FAN2: System Fan Power Connector FAN1, FAN2 is a 3-pin header for system fans. The fan must be a 12V (500mA) fan. Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection FAN3: CPU Fan Power Connector FAN3 is a 3-pin header for the CPU fan. The fan must be a 12V fan. Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection IDE1, IDE2: EIDE Connectors IDE1: Primary IDE Connector Signal Name Pin # Pin # Signal Name
