Summary of the content on the page No. 1
MB879
®
Intel Pentium M
ATI Radeon Xpress 200
Mini-ITX Motherboard
USER’S MANUAL
Version 1.0
Summary of the content on the page No. 2
Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Pentium M are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. All other product names or trademarks are properties of their respective owners. ii MB879 User’s Manual
Summary of the content on the page No. 3
Table of Contents Introduction............................................................... 1 Product Description..............................................................1 Checklist...............................................................................2 MB879 Specifications..........................................................3 Board Dimensions................................................................ 4 Installations.......................................................
Summary of the content on the page No. 4
J9, J6: LVDS Connectors (1st channel, 2nd channel).......18 J7: Panel Inverter Power Connector...................................18 J8: Digital I/O.....................................................................18 J10: 1394 Connector...........................................................19 J11: Panel Inverter Power Connector.................................19 J12: Mini PCI Connector....................................................19 ...................................................
Summary of the content on the page No. 5
LAN Driver Installation..................................................... 53 Appendix................................................................. 57 A. I/O Port Address Map................................................... 57 B. Interrupt Request Lines (IRQ).......................................58 C. Watchdog Timer Configuration.....................................59 MB879 User’s Manual v
Summary of the content on the page No. 6
THE MB879 MINI ITX MOTHERBOARD vi MB879 User’s Manual
Summary of the content on the page No. 7
INTRODUCTION Introduction Product Description Designed for gaming and multimedia applications, the MB879 Mini ITX board incorporates the ATi Xpress 200 chipset, supporting CPU front side bus of 400MHz and 533MHz. The board accommodates Pentium® M and Celeron® M processors with speeds up to 2.26GHz and one DDR2 DIMM memory. The MB879 comes with the RC410MD Integrated Graphics Processor (IGP) that integrates 2D/3D graphics and a system controller in a single chip. The RC410MD delivers the b
Summary of the content on the page No. 8
INTRODUCTION Checklist Your MB879 package should include the items listed below. ® • The MB879 Pentium M Mini-ITX motherboard • This User’s Manual • 1 CD containing chipset drivers and flash memory utility 2 MB879 User’s Manual
Summary of the content on the page No. 9
INTRODUCTION MB879 Specifications [ CPU Socket Socket 479 or FBGA on board CPU Supported Intel Pentium® M / Celeron® M, 90nm process, (3xx only, 4xx not supported) CPU Voltage 0.700V ~ 1.708V CPU Speed / FSB Up to 2.26GHz / 533MHz FSB Green /APM APM1.2 Chipset ATI Radeon Xpress 200 (RC410MD) / SB450 chipset NB: ATi Radeon Xpress 200 (RC410MD), 707-ball FCBGA SB: ATi SB450, 564-ball BGA BIOS Award BIOS, support ACPI function Cache 512K/1M/2M Level 2 (CPU integrated) Memory 1x DDR2 400/533/667 so
Summary of the content on the page No. 10
INTRODUCTION Board Dimensions 4 MB879 User’s Manual
Summary of the content on the page No. 11
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the MB879 in order to set up a workable system. The topics covered are: Installing the CPU........................................................................... Installing the Memory..................................................................... Setting the Jumpers......................................................................... Connectors on MB879.......................
Summary of the content on the page No. 12
INSTALLATIONS Installing the CPU ® The MB879 board supports a Socket 479 processor socket for Intel ® ® Pentium M or Celeron M processors. The processor socket comes with a screw to secure the processor. As shown in the left picture below, loosen the screw first before inserting the processor. Place the processor into the socket by making sure the notch on the corner of the CPU corresponds with the notch on the inside of the socket. Once the processor has slide into the socket, fasten the
Summary of the content on the page No. 13
INSTALLATIONS Installing the Memory The MB879 board supports one DDR2 memory socket for a maximum total memory of 1GB in DDR2 memory type. Installing and Removing Memory Modules To install the DDR2 modules, locate the memory slot on the board and perform the following steps: 1. Hold the DDR2 module so that the key of the DDR2 module align with those on the memory slot. 2. Gently push the DDR2 module in an upright position until the clips of the slot close to hold the DDR2 module in place wh
Summary of the content on the page No. 14
INSTALLATIONS Setting the Jumpers Jumpers are used on MB879 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on MB879 and their respective functions. Jumper Locations on MB879............................................................. JP1: COM4 RS232 +5V / +12V Power Setting................................ JP2: LVDS Panel Voltage Selection
Summary of the content on the page No. 15
INSTALLATIONS Jumper Locations on MB879 Jumpers on MB879........................................................................... Page JP1: COM4 RS232 +5V / +12V Power Setting................................ JP2: LVDS Panel Voltage Selection................................................. JP3: COM3 RS232 +5V / +12V Power Setting................................ JP4: CPU FSB Selection.................................................................... JP5: Clear CMOS Setting....................
Summary of the content on the page No. 16
INSTALLATIONS JP1: COM4 RS232 +5V / +12V Power Setting Pin # Pin # Signal Name JP1 Signal Name 1 RI +12V 2 3 RI (Default) RI (Default) 4 5 RI +5V 6 COM4 Settings: Pin 1-2 short = +12V, Pin 5-6 short = +5V, Pin 3- 4 Standard COM Port JP2: LVDS Panel Voltage Selection JP2 LVDS Voltage 3.3V 5V JP3: COM3 RS232 +5V / +12V Power Setting Pin # Pin # Signal Name JP3 Signal Name 1 RI +12V 2 3 RI (Default) RI (Default) 4 5 RI +5V 6 COM3 Settings: Pin 1-2 short = +12V, Pin 5-6 short = +5V, Pin 3- 4
Summary of the content on the page No. 17
INSTALLATIONS JP5: Clear CMOS Setting JP5 Setting Normal Clear CMOS [ SW1: LVDS Resolution Switch Setting SW1-1 SW1-2 SW1-3 SW1-4 Resolution OFF ON ON OFF 800x600 ON OFF ON OFF 1024x768 OFF OFF ON OFF 1280 X 1024 ON ON OFF OFF 1400 X 1050 OFF OFF OFF OFF CRT Only MB879 User’s Manual 11
Summary of the content on the page No. 18
INSTALLATIONS Connectors on MB879 The connectors on MB879 allow you to connect external devices such as keyboard, floppy disk drives, hard disk drives, etc. The following table lists the connectors on MB879 and their respective functions. Connector Locations on MB879........................................................ CN1: PS/2 Keyboard and PS/2 Mouse Connectors........................... CN2: S-Video and RCA Connector for TV out................................ CN3: COM1 and VGA Connector.
Summary of the content on the page No. 19
INSTALLATIONS Connector Locations on MB879 MB879 User’s Manual 13
Summary of the content on the page No. 20
INSTALLATIONS CN1: PS/2 Keyboard and PS/2 Mouse Connectors PS/2 Mouse PS/2 Keyboard Signal Name Keyboard Mouse Signal Name Keyboard data 1 1 Mouse data N.C. 2 2 N.C. GND 3 3 GND 5V 4 4 5V Keyboard clock 5 5 Mouse clock N.C. 6 6 N.C. CN2: S-Video and RCA Connector for TV out CN3: COM1 and VGA Connector [ Signal Name Pin # Pin # Signal Name DCD 1 6 DSR RXD 2 7 RTS TXD 3 8 CTS DTR 4 9 RI GND 5 10 Not Used [[[[ Signal Name Pin # Pin # Signal Name Red 1 2 Green Blue 3 4 N.C. GND 5 6 GND GND 7 8 G
