Summary of the content on the page No. 1
User’s Manual
ECB-862 Series
Intel Pentium III Full-size PICMG CPU Card
with 4 USB 2.0, Audio, & Dual 10/100 Base-Tx Ethernet
rd
3 Ed. – 20 May, 2005
Part No.2047862000
Summary of the content on the page No. 2
ECB-862/862L FCC STATEMENT THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
Summary of the content on the page No. 3
User’s Manual Copyright Notice Copyright © 2003 - 2005, Evalue Technology Inc., ALL RIGHTS RESERVED. No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer Evalue Technology Inc. reserves the
Summary of the content on the page No. 4
ECB-862/862L A Message to the Customer Evalue Customer Services Each and every Evalue’s product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new Evalue device is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Evalue has come to be known. Your satisfaction is our
Summary of the content on the page No. 5
User’s Manual Product Warranty Evalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Evalue, or which have been subject to misuse, abuse, accident or improper installation. Evalue assumes no liability under the terms of this warranty as a co
Summary of the content on the page No. 6
ECB-862/862L Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 ECB-862 Series Pentium III Full-size CPU card 1 Quick Installation Guide 1 CD-ROM contains the followings: — User’s Manual (this manual in PDF file) — Ethernet driver and utilities — VGA drivers and utilities — Audio drivers and utilities — USB2.0 drivers and utilities Cable set includes the followings: — 1 ATA-100 IDE cable (40-pin,
Summary of the content on the page No. 7
User’s Manual 1. MANUAL OBJECTIVES.............................................................................................1 2. INTRODUCTION ........................................................................................................2 2.1 System Overview ...................................................................................................2 2.2 System Specifications...........................................................................................3 2.3
Summary of the content on the page No. 8
ECB-862/862L 3.9.1 Audio / TV Output Connector (AUDIO1) ......................................................................23 3.9.2 CD-ROM Audio Input Connector (CD1) .......................................................................23 3.9.3 Primary IDE Connector (CN1)......................................................................................24 3.9.4 Secondary IDE Connector (CN5) .................................................................................25 3.9.5 Sig
Summary of the content on the page No. 9
User’s Manual 4.5.10 Load Fail-Safe Defaults................................................................................................66 4.5.11 Load Optimized Defaults..............................................................................................67 4.5.12 Set Supervisor/User Password ....................................................................................67 4.5.13 Save & Exit Setup ..............................................................................
Summary of the content on the page No. 10
ECB-862/862L Memory Parity Error At..............................................................................................................95 Memory Size Has Changed Since Last Boot ............................................................................95 Memory Verify Error At..............................................................................................................95 Offending Address Not Found...................................................................
Summary of the content on the page No. 11
User’s Manual Document Amendment History Revision Date By Comment st 1 October, 2003 Stephen Tsao Initial Release nd 2 March, 2004 Stephen Tsao Add in 3.9.27 LCD panel connector description (page 37) rd 3 May, 2005 Stephen Tsao 1. Modify CN19 USB pin definition 2. CN8’s signal updated. 3. Cn13’s signals modified from USBG0/1 to GND. 4. Moved CN15-17 tables between CN13 & CN18. 5. CN18, CN19, CN24, PWR1 modified VCC to +5V. 6. CN21 table modified to the right way. 7. CN23 ta
Summary of the content on the page No. 12
ECB-862/862L 1. Manual Objectives This manual describes in detail the Evalue Technology ECB-862 Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. The manual is sectioned and includes a User’s Guide that will help the non-technical user to get the unit up and running. A Troubleshooting Guide is
Summary of the content on the page No. 13
User’s Manual 2. Introduction 2.1 System Overview The ECB-862 is an all-in-one Full-size Pentium III Single Board Computer (SBC) designed with Intel embedded chipset VIA 8602 which supports the latest Intel Pentium III CPU with FSB up to 133 MHz, dual PCI-bus Fast Ethernet controllers, and M-Systems DiskOnChip socket. Targeting on the mission critical telecommunication or industrial applications, the ECB-862 comes designed with VIA 8602 Chipset. This makes it a perfect solution for not
Summary of the content on the page No. 14
ECB-862/862L 2.2 System Specifications General Functions • CPU: Universal Socket 370 supports Intel FC-PGA/FC-PGA2 Pentium III / Celeron (CopperMine and Tualatin) and VIA C3 CPU with FSB up to 133MHz • CPU Socket: Intel FC-370, Socket 370 • BIOS: Award 2Mbit Flash BIOS • Chipset: VIA VT8602 / VT82C686B • I/O Chipset: VT82C686B • Memory: Onboard two 168-pin DIMM socket supports up to 1 Gbytes SDRAM • Watchdog Timer: Can generate a system reset, IRQ15 or NMI. Software selectable
Summary of the content on the page No. 15
User’s Manual Optional TV Output Interface TV Encoder: VIA VT1621 TV output interface: Supports both RCA jack and S terminal SSD Interface One 32-pin DIP socket supports M-Systems DiskOnChip 2000 series up to 1 G Bytes Compact Flash: One CF socket supports Type I / II Compact Flash Card Mechanical and Environmental • Power Supply Voltage: ATX type, +5V and +12V • Operating Temperature: 0 to 60° C (32 to 140° F) • Board Size: 13.3"(L) x 4.8"(W) (338 mm x 122 mm) • Weight: 0.6 Kg
Summary of the content on the page No. 16
ECB-862/862L 2.3 Architecture Overview The following block diagram shows the architecture and main components of ECB-862. The two key components on board are the VIA VT8602 North Bridge and VT82C686B super South Bridge. These two devices provide the ISA and PCI bus to which all the major components are attached. The following sections provide detail information about the functions provided onboard. ECB-862/862L User’s Manual 5
Summary of the content on the page No. 17
User’s Manual 2.3.1 VIA VT8602 North Bridge The Apollo PLE133T Graphics Controller is a highly integrated display control device that incorporates a 64-bit 3D/2D graphic engine and video accelerator with advanced DVD video and optional TV output capability. It provides a flexible and high performance solution for graphics and video playback acceleration for various color depth and resolution modes. The Apollo PLE133T Graphics Controller supports a video capture port to import captured
Summary of the content on the page No. 18
ECB-862/862L 2.3.2 Advanced High-Performance DRAM Controller DRAM interface synchronous or pseudosynchronous with CPU FSB speed of 133 / 100 / 66 MHz DRAM interface may be faster than CPU by 33 MHz to allow use of PC133 with 100 MHz VIA C3, Pentium III or Pentium III-M (Tualatin) CPUs or use of PC100 with 66 MHz Celeron CPU DRAM interface may be slower than CPU by 33 MHz to allow use of older memory modules with a newer CPU Concurrent CPU, AGP, and PCI access Different DRAM timi
Summary of the content on the page No. 19
User’s Manual BIOS shadow at 16KB increment Decoupled and burst DRAM refresh with staggered RAS timing CAS before RAS or self refresh 2.3.3 VIA VT82C686B South Bridge The VT82C686B PSIPC (PCI Super-I/O Integrated Peripheral Controller) is a high integration, high performance, power-efficient, and high compatibility device that supports Intel and non-Intel based processor to PCI bus bridge functionality to make a complete Microsoft PC99-compliant PCI/ISA system. In addition to comple
Summary of the content on the page No. 20
ECB-862/862L Integrated PCI-mastering dual full-duplex direct-sound AC97-link-compatible sound system. Hardware soundblaster-pro and hardware-assisted FM blocks are included for Windows DOS box and real-mode DOS compatibility. Loopback capability is also implemented for directing mixed audio streams into USB and 1394 speakers for high quality digital audio. Two game ports and one MIDI port ECP/EPP-capable parallel port Standard floppy disk drive interface Distributed DMA capabili
