Summary of the content on the page No. 1
SubCompact Board GENE-8310
GENE-8310
® ®
Intel Celeron M Processor
Subcompact Board
With LVDS, Ethernet,
6 Channel Audio & Mini PCI
GENE-8310 Rev. A Manual 2nd Ed.
Jan. 2006
Summary of the content on the page No. 2
SubCompact Board GENE-8310 Copyright Notice This document is copyrighted, 2006. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable
Summary of the content on the page No. 3
SubCompact Board GENE-8310 Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™ is a trademark of the Compact Flash Association. ® ® ® ® Intel , Pentium M, and Celeron M are trademarks of Intel Corporation. ® Microsoft Windows is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc. IBM, PC/AT, PS/2, and VGA are
Summary of the content on the page No. 4
SubCompact Board GENE-8310 Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 1 GENE-8310 CPU Card • 1 IDE Cable • 1 KB/Mouse Cable • 2 USB Cable • 1 Audio Cable • 1 COM Port Cable • 1 TV-out and S-terminal Cable • 1 DVI Cable • 1 Parallel Port Cable • 1 Jumper Cap • 1 Quick Installation Guide • 1 CD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, p
Summary of the content on the page No. 5
SubCompact Board GENE-8310 Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-4 1.3 Specifications ............................................................ 1-5 Chapter 2 Quick Installation Guide 2.1 Safety Precautions .................................................... 2-2 2.2 Location of Connectors and Jumpers ..............
Summary of the content on the page No. 6
SubCompact Board GENE-8310 2.18 4P Power Connector (CN9) .................................... 2-16 2.19 TV-out Connector (CN10) ....................................... 2-17 2.20 DVI Connector (CN11) ............................................ 2-17 2.21 Audio Input/Output Connector (CN12).................... 2-17 2.22 Ethernet 10/100 BaseT RJ-45 Phone Jack Connector (CN13)............................................................................. 2-18 2.23 External 5VSB/PWRGD Connecto
Summary of the content on the page No. 7
SubCompact Board GENE-8310 Appendix B I/O Information B.1 I/O Address Map....................................................B-2 st B.2 1 MB Memory Address Map ................................B-2 B.3 IRQ Mapping Chart................................................B-3 B.4 DMA Channel Assignments...................................B-3 vi
Summary of the content on the page No. 8
SubCompact Board GENE-8310 Chapter 1 General Information Chapter 1 General Information 1- 1
Summary of the content on the page No. 9
SubCompact Board GENE-8310 1.1 Introduction The GENE-8310 is the third generation of fanless solutions that AAEON has released through their original design. It is more advanced than previous SubCompact Boards, with higher performance and lower power consumption. We believe the GENE-8310 will become one of the best choices for our customers who need a higher requirement in processor ability with excellent power consumption control. The GENE-8310 derives its excellent functionality fro
Summary of the content on the page No. 10
SubCompact Board GENE-8310 ® Intel platform. It has the best graphics capability among current 3.5” SubCompact Boards. In addition, the GENE-8310 supports CRT, LCD, DVI and TV-out which can meet your requirements. The result is you will never need to worry about the limitations of board size and power consumption using this SubCompact Board for sophisticated graphics output. Wide Expansion Capability Although the GENE-8310 measures only 5.75” x 4”, that does not affect its expansion a
Summary of the content on the page No. 11
SubCompact Board GENE-8310 1.2 Features ® ® ® ® • Onboard Intel Celeron M or Mobile Intel Celeron Processor at 600MHz 0K L2 Cache Processor • 48-bit Dual Channels LVDS TFT LCD • 10/100Mbps Fast Ethernet • AC-97 3D Surround 5.1 Channel Audio • Supports Type II CompactFlash™ Memory • 2 COM / 4 USB2.0 / TV-out / DVI / Digital I/O • + 5V Only Operation Chapter 1 General Information 1-4
Summary of the content on the page No. 12
SubCompact Board GENE-8310 1.3 Specifications System ® ® • CPU: Onboard Mobile Intel Celeron Processor at 600MHz with 0K ® ® L2 Cache or Intel Celeron M Processor 1.3GHz Memory: 200-pin DDR SODIMM x 1, Max. 1GB (DDR 266MHz) ® Chipset: Intel 852GM + 82801 DB (ICH4) I/O Chipset: ITE IT8712IX ® Ethernet: Intel 82562, 10/100Base-TX RJ-45 BIOS: AWARD 512KB FLASH ROM Watchdog Timer: Generates a Time-out System Reset H/W Status Monitoring: Supports Power Supp
Summary of the content on the page No. 13
SubCompact Board GENE-8310 101.6mm) Gross Weight: 0.88lb (0.4kg) Operating Temperature: 32 °F~140 °F (0 °C~60 °C) Display ® Chip: Intel 852GM + Chrontel 7009 Memory: Shared System Memory Up to 64MB with DVMT Resolutions: Up to 1280 x 1024 @ 32bpp Colors for CRT; Up to 1280 x 1024 @ 24bpp Colors for LCD TV-Out: Supports NTSC and PAL standard Internal Graphics: Supports CRT/LCD, CRT/TV, CRT/DVI, LCD/DVI and LCD/TV Dual View/ Simultaneous
Summary of the content on the page No. 14
SubCompact Board GENE-8310 USB: Two 5 x 2 Pin Headers Support 4 USB 2.0 Ports (Does not support Wake-up function) Chapter 1 General Information 1-7
Summary of the content on the page No. 15
SubCompact Board GENE-8310 Chapter 2 Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters and further installation instructions, please refer to the user manual CD-ROM that came with the product. Part No. 2007831011 Printed in Taiwan JAN. 2006 Chapter 2 Quick Installation Guide 2-1
Summary of the content on the page No. 16
SubCompact Board GENE-8310 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times. Place all electronic comp
Summary of the content on the page No. 17
SubCompact Board GENE-8310 2.2 Location of Connectors and Jumpers Component Side CN9 CN19 CN17 CN16 CN8 CN18 CN11 CN10 CN13 CN15 MPCI1 JP1 NOTE: The Height of Cooling System Depends on Customer Cooling Device. Chapter 2 Quick Installation Guide 2-3 CN1 CN2 CN3 CN4 CN5 CN6 CN7 JP2 CN14 JP5 2 8 1 7 CN12 10 12 9 11 5 6 15 11
Summary of the content on the page No. 18
SubCompact Board GENE-8310 Solder Side CFD1 DIMM1 Chapter 2 Quick Installation Guide 2-4
Summary of the content on the page No. 19
SubCompact Board GENE-8310 2.3 Mechanical Drawing Component Side (14.15) (7.88) (1.60) 137.16 137.16 133.93 133.93 114.94 114.30 109.22 90.17 (6.45) 79.38 72.39 54.15 52.60 50.31 43.99 41.59 29.22 23.50 8.89 0.32 0.27 0.00 0.00 1.91 6.99 8.89 (7.88) (13.35) NOTE: The Height of Cooling System Depends on Customer Cooling Device. Chapter 2 Quick Installation Guide 2-5 3.23 3.23 1.32 0.00 0.58 0.58 0.00 5.03 5.47 16.90 28.33 .7 39 6 50.75 51.19 62.81 63.45
Summary of the content on the page No. 20
SubCompact Board GENE-8310 Solder Side 8.89 8.89 0.00 0.00 72.39 109.22 114.30 133.93 133.93 Chapter 2 Quick Installation Guide 2-6 3.23 0.00 0.00 0.58 0.58 87.58 95.20 95.20 98.37
