Summary of the content on the page No. 1
ECM-5510
5.25" AMD Geode GX466 333 MHz Mini Module with 128 MB
DDR SDRAM Onboard, VGA, LVDS, Audio, LAN, CF,
PC/104, PCI, 4 COM, 4 USB 1.1 & GPIO
User’s Manual
nd
2 Ed – 19 January 2007
Part No. E2047551001R
Summary of the content on the page No. 2
ECM-5510 FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINS
Summary of the content on the page No. 3
User’s Manual Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that these produc
Summary of the content on the page No. 4
ECM-5510 Technical Support We want you to get the maximum performance from your products. So if you run into technical difficulties, we are here to help. For the most frequently asked questions, you can easily find answers in your product documentation. These answers are normally a lot more detailed than the ones we can give over the phone. So please consult the user’s manual first. To receive the latest version of the user’s manual; please visit our Web site at: http://www.avalue.co
Summary of the content on the page No. 5
User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Avalue, or which have been subject to misuse, abuse, accident or improper installation. Avalue assumes no liability under the terms of this warranty as a co
Summary of the content on the page No. 6
ECM-5510 Contents 1. Getting Started..........................................................................................................10 1.1 Safety Precautions..................................................................................................10 1.2 Packing List.............................................................................................................10 1.3 Document Amendment History ..................................................................
Summary of the content on the page No. 7
User’s Manual 2.4.16 Serial Port 2 Connector in RS-232 Mode (CN6, Pin 11-20) ...................................................... 40 2.4.17 Serial Port 2 Connector in RS-422 Mode (CN6, Pin 11-20) ...................................................... 41 2.4.18 Serial Port 2 Connector in RS-485 Mode (CN6, Pin 11-20) ...................................................... 42 2.4.19 PC/104 Connector (CN7 + CN8) .................................................................................
Summary of the content on the page No. 8
ECM-5510 4 Drivers Installation ...................................................................................................87 4.1 Install Audio Driver (For AMD GX2) ........................................................................88 4.2 Install Display Driver (For AMD GX2)......................................................................90 4.3 Install Ethernet Driver (For Realtek RTL810x, RTL813x Family) ............................92 5 Measurement Drawing .............
Summary of the content on the page No. 9
User’s Manual 30. Hard Disk(s) fail (80) → HDD reset failed.................................................................................. 101 31. Hard Disk(s) fail (40) → HDD controller diagnostics failed........................................................ 101 32. Hard Disk(s) fail (20) → HDD initialization error........................................................................ 101 33. Hard Disk(s) fail (10) → Unable to recalibrate fixed disk..............................
Summary of the content on the page No. 10
ECM-5510 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devic
Summary of the content on the page No. 11
User’s Manual 1.3 Document Amendment History Revision Date By Comment st 1 May, 2006 Vicky Lin Initial Release ECM-5510 User’s Manual 11
Summary of the content on the page No. 12
ECM-5510 1.4 Manual Objectives This manual describes in detail the Avalue Technology ECM-5510 Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. We strongly recommend that you study this manual carefully before attempting to interface with ECM-5510 series or change the standard configuration
Summary of the content on the page No. 13
User’s Manual 1.5 System Specifications System Onboard AMD Geode GX466 333 MHz CPU Note: Available in different CPU speeds by request BIOS Award 512 KB Flash BIOS System Chipset AMD Geode GX466/CS5535 I/O Chip Winbond W83627HF-AW 64/128/256 MB DDR SDRAM onboard System Memory One 184-pin DIMM socket supports up to 512 MB DDR 200/266 SDRAM SSD One M-Systems DiskOnChip, one CompactFlash Type I/II socket Watchdog Timer Reset: 1 sec.~255 min. and 1 sec. or 1 min./step Expansion
Summary of the content on the page No. 14
ECM-5510 Mechanical & Environmental +5V @ 1.71 A, 5 Vsb @ 0.17 A (with AMD Geode GX466 333 MHz & 256 Power Requirement MB DDR SDRAM) Power Type AT/ATX o o Operation Temperature 0~60 C (32~140 F) Operating Humidity 0%~90% relative humidity, non-condensing Size ( L x W ) 8" x 5.75" (203 mm x 146 mm) Weight 0.88 lbs (0.4 Kg) 14 ECM-5510 User’s Manual
Summary of the content on the page No. 15
User’s Manual 1.6 Architecture Overview 1.6.1 Block Diagram The following block diagram shows the architecture and main components of ECM-5510. The following sections provide detail information about the functions provided onboard. ECM-5510 User’s Manual 15
Summary of the content on the page No. 16
ECM-5510 1.6.2 AMD Geode GX2 & CS5535 The AMD Geode GX2 processor is designed from the ground-up for information appliances, the GX2 processor delivers optimal performance for full-featured multimedia applications across broadband connections. The GX2 processor includes a powerful 32-bit-x86 core integrated FPU, a display controller with up to 1600 x 1200 resolution, a graphic processor, a SDRAM controller (SDR or DDR supported), a TFT interface and integrated DACs for CRT support (pin
Summary of the content on the page No. 17
User’s Manual Display controller • Supports up to 1600 x 1200 x 16 BPP and 1280 x 1024 x 24 BPP @ 85 Hz (CRT) • Hardware-based VGA • Hardware video up/down scaler • Graphics/video alpha blending • TFT or CRT interface • Integrated CRT DACs IDE controller • UDMA-66 compliant • One channel with two devices Flash interface • Multiplexed with IDE interface • Connects to an array of industry standard NAND Flash and/or NOR Flash USB controllers • 2 USB 1.1 controllers, supporting tota
Summary of the content on the page No. 18
ECM-5510 1.6.3 VIA VT1612A Audio Codec VIA Technologies’ VT1612ATM 18-bit audio codec conforms to the AC’97 2.2. The VT1612A integrates Sample Rate Converters and can be adjusted in 1Hz increments. The analog mixer circuitry integrates a stereo enhancement to provide a pleasing 3D surround sound effect for stereo media. Furthermore, an integrated headphone amplifier with thermal shutdown adds signal value by reducing the BOM. This codec is designed with aggressive power management to a
Summary of the content on the page No. 19
User’s Manual 1.6.5 Winbond W83627HF-AW LPC Super I/O The Winbond W83627F/HF is made to fully comply with Microsoft PC98 and PC99 Hardware Design Guide. Moreover, W83627F/HF is made to meet the specification of PC98/PC99’s requirement in the power management: ACPI and DPM (Device Power Management). Super I/O chip provides features as the following: • Meet LPC Spec. 1.0 • Support LDRQ# (LPC DMA), SERIRQ (serial IRQ) • Include all features of Winbond I/O W83977TF and W83977EF • Integrat
Summary of the content on the page No. 20
ECM-5510 1.6.7 NS DS90C385 LVDS Transmitter The DS90C385 transmitter converts 28 bits of LVCMOS/LVTTL data into four LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams over a fifth LVDS link. Every cycle of the transmit clock 28 bits of input data are sampled and transmitted. At a transmit clock frequency of 85 MHz, 24 bits of RGB data and 3 bits of LCD timing and control data (FPLINE, FPFRAME, DRDY) are
