Summary of the content on the page No. 1
2
reliability
Technical manual
System board D1859 (Econel 50)
English
Summary of the content on the page No. 2
Are there ... ... any technical problems or other questions you need clarified? Please contact: ● your sales partner ● your sales outlet ● our hotline for customers who have purchased the system board as a single delivery unit: +49(0) 180 3777 005 The latest information and updates (e.g. BIOS update) on our system boards can be found on the Internet under: http://www.fujitsu-siemens.com Published by Fujitsu Siemens Computers GmbH Edition October 2004
Summary of the content on the page No. 3
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. All rights, including rights of translation, reproduction by printing, copying or similar methods, even of
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Contents System board D1859 .......................................................................................................................... 1 Notational conventions ................................................................................................................. 1 Important notes..................................................................................................................................... 2 Information about boards ..............................
Summary of the content on the page No. 6
Summary of the content on the page No. 7
System board D1859 Your system board is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your system board. Additional information Information on the BIOS Setup and additional descriptions of the drivers are contained: ● in the readme files on your hard disk ● on the “ServerView Suite” CDs (ServerBooks and ServerSupport) The programme Acrobat Reader must be installed to be able to open the manu
Summary of the content on the page No. 8
Important notes Important notes With the system board installed you must open the system to access the system board. How to dismantle and reassemble the system is described in the operating manual accompanying the system. Connecting cables for peripherals must be adequately shielded to avoid interference. Observe the safety notes in the operating manual of your system. ! Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore essential to observe the instruc
Summary of the content on the page No. 9
List of features List of features Onboard features D1859-A Chipset Intel 925 Board size ATX VGA Audio / 8-channel / S/PDIF 5.1 / - / Buzzer / int. Speaker Support - / LAN 1 Gbit / 100 Mbit / 10 Mbit / / LAN ASF / AOL / WOL / Boot / - / / Serial ATA / ATA / RAID / / TM FireWire - USB 2.0 Fan monitoring PSU** / CPU (FAN1) / AUX1 (FAN2) / / / / AUX2 (FAN3) Fan control PSU** / CPU (FAN1) / AUX1 (FAN2) / AUX2 / / / (FAN3) Temperature monitoring CPU/ONB1/ONB2/OFFB / / / - Sma
Summary of the content on the page No. 10
List of features Internal ports (continued) D1859-A S/PDIF 5.1 (digital Audio)* OUT / IN - / - Audio Input - Front panel Audio (headphone, microphone, AC97) - TM IEEE 1394 connector* (FireWire)- USB Ports* (2.0, ~480 Mbit/s) 4 Serial Ports* (RS232, FIFO, 16550 compatible) - Fan Connectors PSU** / CPU / AUX1 / AUX2 1 / 1 /1 / 1 SMBus Connector* (Case Temperature) 1 Cover monitoring* (Casing open) 1 BTX (24-pin) / ATX12V (4-pin) power supply 1 / 1 External ports VGA 1 Audio Mic. In / Line in / Lin
Summary of the content on the page No. 11
Brief instructions on installing system board Brief instructions on installing system board If you have purchased a separate system board, you can install the system board in your system in accordance with the following brief instructions. The activities described here assume a basic knowledge of servers and cannot be carried out by a layperson. If you are not sure whether you have the necessary specialised knowledge, then leave this work to an expert. The illustrations of the system show exampl
Summary of the content on the page No. 12
Brief instructions on installing system board ► Should no suitable connection field be provided in the case, then you must install the connection field (1) provided. Ensure the plate is aligned properly so that the connections are suitable for the system board later. ► Set the system board on the edge on which the connection field is located (2) and then insert the board in the case (3). Make sure that spacers in the housing are only mounted at points at which there are mounting holes in the sys
Summary of the content on the page No. 13
slot 4 Channel B slot 2 slot 3 Channel A slot 1 Interfaces and connectors 1 2 3 4 5 16 15 6 7 PCI Express x8 PCI 1 34 PCI Express x1 SATA 8 PCI 2 1 2 PCI 3 BIOS PCI 4 PCI 5 Battery 14 13 12 11 10 9 1 CPU fan (F1) 9 Fan connetor (F2) 2 PC98 10 Intrusion 2 3 Floppy disk drive 11 I C bus (SMB1) 4 Front panel 12 Fan connector (F3) 5 Extended HD-LED 13 USB1/2 6 IDE primary (IDE1/2) 14 USB3/4 7 ATX power 24pin (PWR1) 15 TPM jumper (optional) 8 Serial ATA 1-4 16 ATX power 4pin (PWR2) D1859 (Econel
Summary of the content on the page No. 14
External ports External ports 13 2 8 7 6 5 4 1 PS/2 mouse port 5 VGA port 2 Parallel port/printer 6 Serial interface COM1 3 LAN connector (10/100/1000 Mbit/s) 7 USB1 connector 4 USB0 connector 8 PS/2 keyboard board LAN connector The system board is optionally equipped with the Broadcom BCM5751 LAN controller. This LAN controller supports the transfer rates 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s. The LAN controller TM supports the WOL functionality through Magic Packet , Basic Alert-on-LAN II and
Summary of the content on the page No. 15
Internal ports and connectors Internal ports and connectors The positions of the internal ports and connectors are shown on the Cover. Additional information on some ports is also provided here. Hard disk connection If you have connected hard disks to serial ATA (one hard disk is possible per serial ATA connection), you must configure the respective settings in the BIOS Setup (further information you can find in the BIOS Setup manual). An ultra ATA/66 or ultra ATA/100 hard disk must be connected
Summary of the content on the page No. 16
Pin assignment of internal ports Pin assignment of internal ports The pin assignment of some internal connections is shown in English in the following. Some of the following connectors may be optional! i 1) Power On/Off Message LED Front panel Power On 2) HD-LED LED Watch the poling of the LEDs. The positive pole Reset of the connection cables is often indicated with a coloured wire. 1 2 Recovery Password Speaker 1) Both jumper positions possible 2) 2pin or 3pin connector possible Connection Not
Summary of the content on the page No. 17
Pin assignment of internal ports 2 IDE/ATA interface 1 Pin Signal Pin Signal 1 Reset drive (low asserted) 2 GND 3 Data 7 (high asserted) 4 Data 8 (high asserted) 5 Data 6 (high asserted) 6 Data 9 (high asserted) 7 Data 5 (high asserted) 8 Data 10 (high asserted) 9 Data 4 (high asserted) 10 Data 11 (high asserted) 11 Data 3 (high asserted) 12 Data 12 (high asserted) 13 Data 2 (high asserted) 14 Data 13 (high asserted) 15 Data 1 (high asserted) 16 Data 14 (high asserted) 17 Data 0 (high asserted)
Summary of the content on the page No. 18
Pin assignment of internal ports 1 2 USB - dual channel 11 12 Pin Signal Pin Signal 1 Key 2 Chipcardreader on or not connected 3 VCC 1 or 3 4 VCC 2 or 4 5 Data negative 1 or 3 6 Data negative 2 or 4 7 Data positive 1 or 3 8 Data positive 2 or 4 9GND 10 GND 11 Key 12 not connected 1 Fan Pin Signal 1GND 2 +12 V 3 Fan sense 4 Fan Control 12 D1859 (Econel 50)
Summary of the content on the page No. 19
Pin assignment of internal ports Floppy interface 1 Pin Signal Pin Signal 1 GND 18 Step DIR (low asserted) 2 FDHDIN (low asserted) 19 GND 3 GND 20 Step Pulse (low asserted) 4 not connected 21 GND 5 Key 22 Write Data (low asserted) 6 not connected 23 GND 7 GND 24 Write Enable (low asserted) 8 Index (low asserted) 25 GND 9 GND 26 Track 0 (low asserted) 10 Motor A Enable (low 27 GND asserted) 11 GND 28 Write Protect (low asserted) 12 Drive B Select (low 29 GND asserted) 13 GND 30 Read Data (low ass
Summary of the content on the page No. 20
Pin assignment of internal ports 2 LCD display 1 Pin Signal Pin Signal 1 SMB CLK 8 LAN Link Icon 2 GND 9 Harddisk Action Icon 3 SMB DATA 10 BMC Alert Icon 4 GND 11 Message Icon 5 Key 12 Sleep Icon 6RFU 13 Power Icon Reserved for Future use 7 LAN Active Icon 14 P3V3P_DUAL Intrusion 1 Pin Signal 1GND 2 Case open (low asserted) 3 Intrusion switch present (low asserted) 14 D1859 (Econel 50)
