Summary of the content on the page No. 8
In-System Serial Programming The CY3207ISSP, ICE (CY3215-DK), and MiniProg1 (CY3210-MiniProg1) all allow easy In-System Serial Programming (ISSP). A cable is included in the ISSP Development Kit (CY3207ISSP.) All designers are encouraged to include ISSP capability on their printed circuit boards (PCBs.) ISSP is perfect for prototyping because it allows rapid reprogramming of the PSoC part mounted on the PCB and eliminates the need for multiple package-specific programmers. ISSP
Summary of the content on the page No. 9
Prototyping Modules (CY3210-2xxxx) PSoC Prototyping Modules are 28-pin PDIP adapters that seamlessly connect any PSoC device package-type to the 28- pin PDIP connector that is default on Cypress PSoC kits. Check the selection tables in the Kit Components and Accessories section of this document for a list of Prototyping Modules offered by Cypress. (Note: Prototyping Modules may sometimes be referred to as Evaluation PODs.) Prototyping Modules offer quick and easy prototyping
Summary of the content on the page No. 10
Kits DEMO/STARTER KITS DEMO/STARTER KITS P/N Description Kit Contents Photo PSoC® FirstTouch™ Kit www.cypress.com/FirstTouch • The PSoC FirstTouch Starter Kit is a USB thumb drive kit that provides a quick, easy, and affordable way for embedded customers to evaluate the integration, flexibility, and real mixed-signal programmability of PSoC mixed-signal arrays. • Two small boards -- a main • Without writing or debugging a single line of C or system board that interfaces As
Summary of the content on the page No. 11
P/N Description Kit Contents Photo 2 I C Port Expander Lite Demo Kit The CY3242-IOXLite Demo Kit quickly demonstrates the 2 2 • I C Port Expander Demo following value propositions of Cypress' I C port expander Board using CY8C9520 solutions: PSoC(R) Port Expander CY3242- IOXLite Device • USB Cable from Board to PC • Integration • Kit Documentation and • Flexibility Design Files CD • Compatibility One Cypress I2C Port Expander device replaces multiple port expander ICs fro
Summary of the content on the page No. 12
E EV VA AL LU UA AT TIIO ON N K KIIT TS S P/N Description Kit Contents Photo Evaluation Board with LCD PSoC Evaluation Kit Module • This kit features an evaluation board and MiniProg1 MiniProg Programming Unit programming unit. The evaluation board includes an CY3210- 28-Pin CY8C29466-24PXI PDIP LCD module, Potentiometer, LEDs, and plenty of PSoCEval1 PSoC Device Sample (2) breadboarding space to meet all of your evaluation needs. PSoC Designer Software CD • The
Summary of the content on the page No. 13
P/N Description Kit Contents Photo CY3203A-CapSense CSA Evaluation Kit • Training board (CY8C20x34) • PSoC Designer and Example • An excellent CapSense learning resource with Project CD software, hardware and example projects to help CY3203A- • CSA User Module designers learn how to implement PSoC CapSense in CapSense • Mini Programmer unit their own design using the CY8C20x34 family with CSA-type sensing. • LCD module • USB cable • A training board is included
Summary of the content on the page No. 14
P/N Description Kit Contents Photo • CY3210-PSoCEval1 Rev. B Board SD Card Module Evaluation Kit • SD Card Adapter Board • SD Memory Card The SD Card Module Evaluation Kit assesses the PSoC SD • USB to SD Card Reader Card user module's ability to quickly and easily write to, CY3210- • MiniProg1 read from and seamlessly integrate an SD card module into SDCARD • USB Cable an embedded design. Secure Digital (SD) flash memory • 12V Power Supply technologies are
Summary of the content on the page No. 15
P/N Description Kit Contents Photo RGB High Brightness LED Kit • CY3261A-RGB board The CY3261A-RGB board is a preprogrammed HB LED CY3261A- • PSoC Designer(TM) and PSoC color mix board with seven pre-set colors using the RGB Programmer CD CY8CLED16 EZ-Color HB LED Controller. The color • USB cable selector software application can be installed on a host PC • Power cable and is used to control the EZ-Color HB LED controller using the included USB cable. The application enables y
Summary of the content on the page No. 16
D DE EV VE EL LO OP PM ME EN NT T K KIIT TS S P/N Description Kit Contents Photo • Image Craft C-Compiler License (also orderable separately as CY3202-C) • ICE-Cube Unit • 28 pin PDIP Emulation Pod for CY8C29466-24PXI Basic Development Kit • 28 pin CY8C29466-24PXI PDIP PSoC Device Samples (two) • PSoC Designer Software CD The CY3215-DK development kit includes a CY3215-DK • ISSP Cable tiny footprint, high-speed in-circuit USB 2.0- • MiniEval Socket Program
Summary of the content on the page No. 17
P/N Description Photo CY3240- 2 I C – USB Bridge Kit (Rev A) I2USB The I2C-USB Bridge Kit allows one to test, tune and debug hardware and software of a 2 PSoC application by bridging the USB port to I C. Populated with the CY8C24894 PSoC device. A wide variety of devices can be connected to the PC using this bridge. Among them are: EEPROMs, real-time clocks, ADC/DAC converters, LCD displays, regulated DC/DC converters, port expanders and many other devices incorporating the I2C
Summary of the content on the page No. 18
PSoC PROGRAMMING KITS PSoC PROGRAMMING KITS P/N Description Kit Contents Photo “MiniProg” Programmer with Evaluation board • MiniEval board is a programming and • MiniProg (or “MiniProg1”) evaluation board that allows socket Programming Unit programming of DIP devices. • MiniEval Socket Programming and • It also includes LEDs and a POT for Evaluation Board simple evaluation and demonstration, • 28-Pin CY8C29466-24PXI PDIP but does not include a prototyping area.
Summary of the content on the page No. 19
P/N Description Kit Contents Photo • Image Craft C-Compiler License (also orderable separately as CY3209-C) • ICE-Cube Unit • 28 pin PDIP Emulation Pod for CY8C29466-24PXI • 28 pin CY8C29466-24PXI PDIP Basic Development Kit PSoC Device Samples (two) CY3215-DK • PSoC Designer Software CD The CY3215-DK development kit includes a • ISSP Cable tiny footprint, high-speed in-circuit USB 2.0- • MiniEval Socket Programming and based emulator with a large trace
Summary of the content on the page No. 20
KIT COMPONENTS & ACCESSORIES KIT COMPONENTS & ACCESSORIES Foot & Emulation POD Selection Guide Foot & Emulation POD Selection Guide Use this table when selecting an emulation kit and package adapter (foot) for use with your CY3215-DK (In-circuit emulation and programming kit.) Each Emulation Kit contains one POD and two FEET. However, the FEET in each Emulation Kit are a default PDIP style. To emulate with a specific package type, a FOOT of the proper type must be added. FEET com
Summary of the content on the page No. 1
®
PSoC & EZ- Color Development Tools Selector Guide
For CY8C29x66, CY8C27x43, CY8C24x94, CY8C24x23A,
CY8C21x34, CY8C21x23, CY20x34 and CY8CLEDxx
A guide for development tool selection for Programmable System-on-Chip (PSoC) and EZ-Color designs
Cypress Semiconductor has a Development Tool for every need – from entry-level evaluation and
prototyping, to full-speed, real-time emulation and debugging; to programming in a high-volume
manufacturing setting.
Table of Contents
Summary of the content on the page No. 2
Software Cypress’s PSoC Mixed Signal Array comes with Windows-based software and hardware design tools. Fast, efficient, prototyping and design for embedded systems is now a reality. PSoC software is available at no cost. Download at http://www.cypress.com, and the hardware tools that suit your design needs from evaluation to prototyping and emulation are discussed in the following sections: TM PSoC Designer At the core of the PSoC development software suite is PSoC Designer. Utili
Summary of the content on the page No. 3
TM PSoC Express PSoC Express is the first visual embedded system design tool that allows a user to create an entire PSoC project and generate a schematic, BOM, and data sheet without writing a single line of code. A Users work directly with application C objects such as LEDs, switches, sensors, and fans. For more information and to download Express, please visit www.cypress.com/express B D A Select inputs and outputs B Define the output’s behavi
Summary of the content on the page No. 4
PSoC Programmer PSoC Programmer is a programming application that helps to deliver host-resident application code to the target via a hardware programming tool. Flexible enough to be used on the bench in development, yet suitable for factory programming, PSoC Programmer works as a standalone programming application TM TM or it can operate directly from PSoC Designer or PSoC Express . PSoC Programmer is the one-stop programming application for Cypress PSoC development tools. http://ww
Summary of the content on the page No. 5
PSoC Designer/Programmer Hardware This section introduces the major categories of hardware Cypress offers for development with PSoC. The hardware development for Cypress PSoC falls into five major categories: Demo/Starter Kits, Evaluation Kits, Development Kits, Reference Design Kits, and Programming Kits. Cypress Semiconductor also offers individual Accessories/Kit Components: • Demo/Starter Kits: Proof-of-Concept demonstration of technology and potential application. Starter kits
Summary of the content on the page No. 6
PSoC Designer/Programmer Development and Programming Methods Currently there are four ways to program a PSoC: • Prototype programming • Full-featured in-circuit emulation • Production programming • Cypress factory programming for high volume orders** MiniProg PSoCEval1 or MiniEval Inexpensive Direct Connect USB Cable Prototype Programming Target PCB with PSoC MiniProg USB Cable 5-pin header * Full-Featured Emulation ICE-Cube MiniEval USB Cable ISSP Cable
Summary of the content on the page No. 7
In-Circuit Emulation with PSoC TM. The In-circuit Emulator (ICE) is driven by the Debugger in PSoC Designer The software interface of the debugger allows the user to run, halt, and single-step the processor with the ICE. It also allows the user to set complex event points. Event points can start and stop the trace memory on the ICE, as well as break the program execution. The ICE can also serve as a single-site device programmer via an ISSP Cable and the MiniEval board includ
