Summary of the content on the page No. 1
DT-X11 Series
Hardware Manual
(Version 1.01)
CASIO Computer Co., Ltd.
Copyright ©2006. All rights reserved.
August 2006
Summary of the content on the page No. 2
Table of Contents Editorial Record 4 Preface 5 Chapter 1. Overview of the Products 6 1.1. Features 6 1.2. Available Models 8 1.2.1. Options and Interfaces 9 1.3. General Guide 10 1.3.1. DT-X11 10 1.3.2. DT-167CHGE Car Mounted Battery Charger 12 1.3.3. DT-160IOE Bridge Satellite Cradle 13 1.3.4. DT-169CHGE Cradle-type Battery Charger 15 1.3.5. DT-5022CHG Dual Battery Charger 16 Chapter 2. Hardware Specifications 17 2.1. DT-X11 17 2.2. DT-160IOE Bridge Satellite Cradle 20 2.3.
Summary of the content on the page No. 3
5.3.4. HA-A20BAT/DT-5025LBAT 42 5.3.5. DT-894CFU CF Card Extension Unit 42 5.4. Reliability 43 5.4.1. DT-X11 43 5.4.2. DT-160IOE/DT-169CHGE 43 5.4.3. DT-5022CHG 44 5.5. Compliance 45 5.5.1. DT-X11 45 5.5.2. DT-160IOE/DT-169CHGE 45 Chapter 6. Cable Specifications 46 6.1. For Chain Connection and Short Length 46 6.2. For Chain Connection and Long Length 47 Chapter 7. Precautions 48 7.1. Handling 48 7.2. Safety 49 7.2.1. Battery Pack/Memory Backup Battery 49 7.2.2. General 51
Summary of the content on the page No. 4
Editorial Record Manual Date edited Page Content Version no. 0.90 February 2006 Tentative version 1.00 March 2006 Original version 1.01 August 8 The content in Table 1.2 of Chapter 1.2 is corrected. 26 The content in Table 2.9 of Chapter 2.7 is corrected. 4
Summary of the content on the page No. 5
Preface This reference manual describes about the CASIO DT-X11 series handheld terminals with C-MOS imager or Laser Scanner integrated. A new generation of handheld terminal has been developed. CASIO introduces the revolutionary DT-X11 series of handheld terminal with built-in Intel® PXA255 Application Processor, C-MOS imager or 1D bar code scan engine and diverse wireless LAN communications via Bluetooth, IEEE802.11b WLAN and WAN card. Running under Microsoft® Windows® CE 5.0 operati
Summary of the content on the page No. 6
1. Overview of the Products 1.1 Features Incorporates .NET technology • Uses WindowsCE 5.0 operating system. • Makes effective use of .NET resources developed by other corporations. • Employment of eMbedded OS makes it possible to build a flexible WindowsCE system. Enhanced communicating functions • Covers GPRS/WLAN, etc. by using various communication cards. ® • Built with Bluetooth Ver1.2 module. • The transfer rate of the WLAN is 5 Mbps, which is the maximum rate of communicatio
Summary of the content on the page No. 7
Aiming to a full compliance with the “Restriction of the use of certain Hazardous Substances in electronic equipment (RoHS)” set mandatory on July 1 2006 The following products have been assembled with devices, components and parts manufactured using Lead (Pb) free solder. - DT-X11M10E - DT-X11M10RC - DT-X11M30E - DT-X11M30U - DT-X11M30RC 7
Summary of the content on the page No. 8
1.2 Available Models Table 1.1 List of models Wireless Communication PC Card Memory Model Scan Engine slot Bluetooth IEE802.11b RAM FROM DT-X11M10E Laser Scanner Yes Yes Yes 64MB 128MB DT-X11M10RC Laser Scanner Yes No No 64MB 128MB DT-X11M30E C-MOS Imager Yes Yes Yes 64MB 128MB DT-X11M30U C-MOS Imager Yes Yes Yes 64MB 128MB DT-X11M30RC C-MOS Imager Yes No No 64MB 128MB Table 1.2 Options Model Product Remark DT-160IOE Bridge Satellite Cradle DT-169CHGE Cradle-type battery cha
Summary of the content on the page No. 9
1.2.1 Options and Interfaces DT -X11 USB Port (Ver1. 1 Function ) PC IrDA Printe, et r c. USB RS-232 C IrDA Port Bridge Satellite Cradle (IrDA 1.1) DT-160IOE RS-422 RS-422 PC AC Adaptor Bridge Satellite Cradle AD-S42120A- E DT-1 60IOE Power Supply Cradle -type Battery Terminals Charger (Built- in Charge DT-169CHGE Circuit) AC Adaptor AC Adaptor AD-S42120A- E AD-S42120A-E Car Mounted Battery Charger DT-167CHGE Car Power Cable DT- 827CAC Battery Pack Battery Pack HA-A20BAT HA- A 2
Summary of the content on the page No. 10
1.3 General Guide 1.3.1 DT-X11 Left Front Right Back 1 2 15 22 3 23 16 17 24 4 19 20 5 6 14 7 25 18 18 8 13 9 10 11 21 12 Fig. 1.2 Table 1.4 Names of parts No. Name Description 1 Indicator 1 Indicates the result of a bar code reading or other read operation. Red : Read error Green : Read successful 2 Indicator 2 This lamp indicates the charge status of the battery pack. Red : Charging Green : Charging complete 3 LCD Panel/Touch Screen Shows text, operation indicators, etc. Als
Summary of the content on the page No. 11
10 Function Keys These keys can be assigned any function other than barcode reading. The following are the initial default settings. F1 : Deletes one character to the left. F2 : Inputs a hyphen (-). F3 : Inputs a period (.). F4 : Toggles to switch between numbers and alphabets. 11 IR Port This port is used for IR communication with another Handheld Terminal or Bridge Satellite Cradle. 12 Power Contacts Contact point for supplying power from Bridge Satellite Cradle and Cradle-type Bat
Summary of the content on the page No. 12
1.3.2 DT-167CHGE Car Mounted Battery Charger Views Power Indicator Lamp Power Contacts Power Switch Car plug code jack Remove button Fig. 1.3 12
Summary of the content on the page No. 13
1.3.3 DT-160IOE Bridge Satellite Cradle The following external views show the DT-160IOE Bridge Satellite Cradle. Refer to Table 1.5 for each referenced part on the DT-160IOE. Views Back 1 2 3 4 5 Top Right Bottom 13 6 14 7 12 8 Front 9 11 10 Fig 1.1 Table 1.5 Names of parts No. Name Description 1 USB Port This port accepts connection of a USB cable for connection to a computer for transfer of system data and file data. Use of the USB port requires installation of a special driv
Summary of the content on the page No. 14
No. Name Description 5 Wall Mount The holes in this plate accept screws that secure the wall mount unit in place. Unit Fastening Plate 6 Terminal Detect This switch detects when the Handheld Terminal is not seated correctly on the Switch Bridge Satellite Cradle. 7 IR Port This port transfers data to the Handheld Terminal via IR port. 8 Power Contacts Power is supplied to the Handheld Terminal via these contacts. 9 Power Indicator This lamp indicates the power status and the mounting st
Summary of the content on the page No. 15
1.3.4 DT-169CHGE Cradle-type Battery Charger The following external views show the DT-169CHGE (Cradle-type Battery Charger). Refer to Table 1.6 for each referenced part on the DT-169CHGE. Views 1 Back Front 2 5 Top Right Bottom 7 3 6 4 Fig 1.2 Table 1.6 Names of parts No. Name Description 1 AC Adaptor Jack Connects the AC adaptor here. 2 Wall Mount Unit The holes in this plate accept screws that secure the wall mount unit in place. Fastening Plate 3 Terminal Detect This switch
Summary of the content on the page No. 16
1.3.5 DT-5022CHG Dual Battery Charger The following external views show the DT-5022CHG (Dual Battery Charger). Refer to Table 1.7 for each referenced part on the DT-5022CHG. Views Top 2 3 Front Back 3 4 4 4 4 1 1 3 Fig 1.3 Table 1.7 Names of parts No. Name Description 1 Charge Indicator This lamp indicates the charge status of the battery pack(s). Lamp Off : Not charging Red : Charging Red Flashing : Battery pack problem Green : Charging complete 2 AC Adaptor Jack Connects t
Summary of the content on the page No. 17
2. Hardware Specifications 2.1 DT-X11 Table 2.1 Item Specification Remark CPU, Memory ® CPU Intel PXA255 Application Processor Operating clock; max 400 MHz RAM 64 MB FROM 128 MB (user area; approx. 115 MB) FlashFX built in. ® ® OS Microsoft Windows CE 5.0 operating system C-MOS Imager (DT-X11M30E, DT-X11M30U, and DT-X11M30RC) Method C-MOS Imager, 752 x 480 (Wide VGA), monochrome Emitting angle Redirected downward at 45 degree Resolution 1D : 0.15mm 2D Stacked : 0.169mm 2D M
Summary of the content on the page No. 18
Laser Scanner (DT-X11M10E and DT-X11M10RC) Method Semi-conductor laser light Laser emitting angle Straight Wave length 650±10 nm Optical output <1 mW No. of scannings 100±20 times per second Resolution 0.127 mm (minimum) PCS 0.45 (minimum) Print contrast signal Readable distance Approximately 40 to 300 mm Readable width Max. 40 mm When the distance is at 40 mm. Max. 238 mm When the distance is at 300 mm. Daylight for scanning 50,000 Lux or less Readable 1D bar code EAN8/JA
Summary of the content on the page No. 19
® Bluetooth ® Standard Bluetooth Specification Ver.1.2 Comm. range Approx. 3 m Depending on the surrounding conditions Output power Maximum. 3dBm ( PowerClass 2) Serial interface Standard USB Slave Mini B 5 Pin. Baud rate Full speed (12 Mbps) Audio Earphone jack φ2.5mm 3-pole Supports headset. PC Card (applicable to DT-X11M10E, DT-X11M30E, and DT-X11M30U) Standard PC Card Type I / Type II 3.3V/5.5V Supply current 450mA(5V), 500mA(3.3V) Constant supply current values WLAN (appli
Summary of the content on the page No. 20
2.2 DT-160IOE Bridge Satellite Cradle Table 2.2 Item Specification Remark Interface IrDA Standard IrDA Ver. 1.1 compatible Comm. method Half duplex Synchronization Start/stop method Comm. speed 4 Mbps (maximum) USB Standard USB Ver.1.1 compatible Baud rate 12 Mbps (maximum) Connector 1 VBus 12 2 – Data (D -) 3 + Data (D+) 43 4 GND USB connector B type RS-232C Comm. method Full duplex Synchronization Start/stop method Comm. speed 115.2 Kbps Connector 1 VBus SG E
