Summary of the content on the page No. 1
USER GUIDE
2-PORT USB 3.0 SUPERSPEED PCI EXPRESS CARD
Model: 29055
1
Summary of the content on the page No. 2
TABLE OF CONTENTS Introduction ........................................................................................................................................................................ 2 Features .............................................................................................................................................................................. 3 System Requirements .......................................................................................
Summary of the content on the page No. 3
INTRODUCTION Thank you for purchasing the 2-Port USB 3.0 SuperSpeed PCI Express Card. The 2-Port USB 3.0 SuperSpeed PCI Express Card adds SuperSpeed USB capabilities to your computer. Simply install this card into an available PCI slot on your computer to add two USB 3.0 SuperSpeed ports. SuperSpeed USB supports transfer rates of up to 5 Gbps- up to 10 times faster than USB 2.0. The 2-Port USB 3.0 SuperSpeed PCI Express Card is ideal for quickly transferring large amounts of data from
Summary of the content on the page No. 4
FEATURES Adds two USB 3.0 A-Male ports to a computer Connects internally via the PCI-e connector 5 Gbps signaling rate- 10X faster than USB 2.0 Backwards compatible with USB 2.0 Improved power efficiency over USB 2.0 Ideal for large data transfers from external hard drives, real-time video cameras, and other data intensive devices 3
Summary of the content on the page No. 5
SYSTEM REQUIREMENTS Operating System: Windows 7, XP, or Vista™ 4
Summary of the content on the page No. 6
PACKAGE CONTENTS 2-Port USB 3.0 SuperSpeed PCI Express Card Driver CD User Guide 5
Summary of the content on the page No. 7
DEVICE OVERVIEW USB 3.0 Ports 6
Summary of the content on the page No. 8
DRIVER INSTALLATION Before you install the device in your computer, you will need to install the necessary driver for proper operation. Please follow the procedure below. For Windows XP, Vista, Windows 7 Note: The following setup is an example shown using a Windows XP operating system. Some screenshots may vary slightly depending on your operating system. The setup wizard is designed to step you through each part of the driver installation process successfully. Step 1 Insert
Summary of the content on the page No. 9
DRIVER INSTALLATION Step 2 After reading the End-User License Agreement, please select “I accept the terms in the License Agreement” and click Next. Step 3 Please click Browse to choose the destination folder, and then click Next. 8
Summary of the content on the page No. 10
DRIVER INSTALLATION Step 4 Click Install to begin driver installation. The driver installation may take a few minutes. You may also get a software installation Windows security pop-up during this time. Click Continue Anyway when it appears to complete the installation. 9
Summary of the content on the page No. 11
DRIVER INSTALLATION Step 5 When the installation has completed, click Finish to exit the setup wizard. 10
Summary of the content on the page No. 12
DEVICE INSTALLATION Step 1 Turn off your computer and remove the cover/panel to expose the PCI slot. Step 2 Plug the 2-Port USB 3.0 Card into the PCI slot on the computer. Step 3 Replace the cover/panel and turn on your computer. When your computer starts up, a Found New Hardware Wizard will appear. Note: The following setup is an example shown using a Windows XP operating system. Some screenshots may vary slightly depending on your operating system. The setup wizard is des
Summary of the content on the page No. 13
DEVICE INSTALLATION Step 4 When the Found New Hardware Wizard appears, select Yes, this time only, and click Next. Step 5 Choose Install the software automatically and click Next. The Windows security pop-up may appear during this process. Click Continue Anyway to continue with the installation. 12
Summary of the content on the page No. 14
DEVICE INSTALLATION Step 6 Click Finish to complete the installation and exit the wizard. Step 7 The Found New Hardware Wizard will appear again. Repeat steps 4-6 for second USB 3.0 port installation. 13
Summary of the content on the page No. 15
VERIFY DEVICE INSTALLATION After you have completed the driver and device installation, you can go to the Device Manager to verify the product is installed and recognized properly. Windows XP Windows Vista/Windows 7 14
Summary of the content on the page No. 16
TECHNICAL SPECIFICATIONS Product No. 29055 Complies USB Rev. Ver. 3.0 Revision 2.0; PCI Bus Power PCI Express Base Management Interface Specification Specification: Revision 1.2 Connectors USB 3.0 Type A x2 (Downstream) Low-speed (1.5Mbps)/ Full-speed (12Mbps)/ Data Speed Support High-speed (480Mbps)/ Super- speed (5Gbps) Control/ Bulk/ Date Transfer Type Interrupt/ Support Isochoronous Power to Ports 500 mA (max.) Product Weig
Summary of the content on the page No. 17
CABLES TO GO™ ONE YEAR WARRANTY At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com. Cables To Go 3555 Kettering B
Summary of the content on the page No. 18
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product. ! In case of a storm, it
Summary of the content on the page No. 19
REGULATORY COMPLIANCE FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received. Including interference that may cause undesired operation. CE This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B 18
Summary of the content on the page No. 20
19
