Summary of the content on the page No. 1
R
TUSI-M
Socket 370 microATX Motherboard
USER’S MANUAL
Summary of the content on the page No. 2
USER'S NOTICE No part of this manual, including the products and software described in it, may be repro- duced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED W
Summary of the content on the page No. 3
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support Tel (English): +886-2-2894-3447 ext. 706 Tel (Chinese): +886-2-2894-3447 ext. 111 Fax: +886-2-2890-7698 Email: tsd@asus.com.tw Newsgroup: news2.asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL (America) Marketing Address: 6737 Mowry Avenue,
Summary of the content on the page No. 4
CONTENTS 1. INTRODUCTION ............................................................................. 7 1.1 How This Manual Is Organized .................................................. 7 1.2 Item Checklist ............................................................................. 7 2. FEATURES ........................................................................................ 8 2.1 The ASUS TUSI-M ..................................................................... 8 2.1.1 Specifi
Summary of the content on the page No. 5
CONTENTS 4.4 Advanced Menu ........................................................................ 52 4.4.1 Chip Configuration .......................................................... 55 4.4.2 I/O Device Configuration ................................................ 58 4.4.3 PCI Configuration ............................................................ 60 4.4.4 Shadow Configuration ..................................................... 62 4.5 Power Menu ........................................
Summary of the content on the page No. 6
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
Summary of the content on the page No. 7
1. INTRODUCTION 1.1 How This Manual Is Organized This manual is divided into the following sections: 1. INTRODUCTION Manual information and checklist 2. FEATURES Production information and specifications 3. HARDWARE SETUP Intructions on setting up the motherboard. 4. BIOS SETUP Intructions on setting up the BIOS 5. SOFTWARE SETUP Intructions on setting up the included software 6. SOFTWARE REFERENCE Reference material for the included software 7. APPENDIX Optional items and general reference 1.2
Summary of the content on the page No. 8
2. FEATURES Specifications 2. FEATURES 2.1 The ASUS TUSI-M The ASUS TUSI-M motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest processors. 2.1.1 Specifications • Latest Processor Support ® Intel Pentium III 100/133MHz FSB Coppermine core FC-PGA Intel Celeron™ 66MHz FSB Coppermine core FC-PGA Intel Celeron™ 100MHz FSB Tualatin core FC-PGA2 • SiS AGPset: SiS 630ET AGPset with integrated SiS300 AGP graphics control- ler supports a 133MH
Summary of the content on the page No. 9
2. FEATURES • Smart BIOS: 2Mbit flash ROM gives a new easy-to-use interface which pro- vides more control and protection over the motherboard. Provides Vcore and CPU/ SDRAM frequency adjustments, boot block write protection, and HD/SCSI/MO/ ZIP/CD/Floppy boot selection. Hardware random number generator supports new security software for data protection and secured Internet transactions. • Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI mas- ter busses to the memory and pro
Summary of the content on the page No. 10
2. FEATURES Performance 2. FEATURES 2.1.3 Performance • UltraPerformance: Onboard IDE Bus Master controller with two connectors that support four IDE devices in two channels. Supports UltraDMA100//66/33, (IDE DMA Mode 2), PIO Modes 3 & 4, and supports Enhanced IDE devices, such as DVD-ROM, CD-ROM, CD-R/RW, LS-120, and Tape Backup drives. • Dual Speeds: CPU frequency can operate at either 133MHz or 100MHz. • Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI mas- ter buses to
Summary of the content on the page No. 11
2. FEATURES 2.1.4 Intelligence • Fan Status Monitoring and Alarm: To prevent system overheat and system damage, the CPU, power supply, and system fans can be monitored for RPM and failure. All the fans are set for its normal RPM range and alarm thresholds. • Temperature Monitoring and Alert: To prevent system overheat and system dam- age, this motherboard supports processor thermal sensing and auto-protection. • Voltage Monitoring and Alert: System voltage levels are monitored to ensure stable
Summary of the content on the page No. 12
2. FEATURES MB Components 2. FEATURES 2.2 TUSI-M Motherboard Components See opposite page for locations. Location Processor Support Socket 370 for Pentium III/Celeron Processors ....................... 2 Chipsets SiS 630ET 3C Integration Single Chip .................................... 3 ITE 8705 Super I/O Chipset ................................................... 14 2Mbit Flash BIOS .................................................................. 13 Main Memory Maximum 1GB support 2 DIMM S
Summary of the content on the page No. 13
2. FEATURES 2.2.1 Component Locations 123 45 6 23 22 21 20 19 18 17 16 15 14 13 12 11 10 98 7 ASUS TUSI-M User’s Manual 13 2. FEATURES Component Locations
Summary of the content on the page No. 14
3. H/W SETUP Motherboard Layout 3. HARDWARE SETUP 3.1 TUSI-M Motherboard Layout CPU_FAN WOR PS/2 T: Mouse PWRTMP B: Keyboard Bottom: Top: USB1 RJ-45 USB2 USBPWR1 COM1 AUX CD1 SiS630ET 3C VGA PWR_FAN Integration Line Single Out AUDIO_PANEL Chip Line In MODEM 0 1 2 3 Row Mic In 32-bit CR2032 3V Lithium Cell PCI CMOS Power Audio Chipset CLRTC PCI Slot 1 BUZZER FLOPPY ITE 8705 Super I/O PCI Slot 2 USBPWR0 USB1 R 2Mbit JEN TUSI-M Flash AFPANEL BIOS USB2 PCI Slot 3 WOL_CON Audio Modem Riser (AMR) ID
Summary of the content on the page No. 15
3. HARDWARE SETUP 3.2 Layout Contents Motherboard Settings 1) JEN p.17 JumperFree Mode Setting (Enable/Disable) 2) USBPWR0/USBPWR1 p.17 USB Power Up Settings (Enable/Disable) 3) FS3, FS1, FS2, FS0 p.18 CPU External Frequency Selection Expansion Slots 1) DIMM1, DIMM2 p.20 168 Pin DIMM Memory Support 2) CPU Socket 370 p.22 Central Processing Unit 3) PCI1, PCI2, PCI3 p.23 32-bit PCI Bus Expansion Slots 4) AMR p.25 Audio Modem Riser Slot Connectors 1) PS2KBMS p.26 PS/2 Mouse Connector (6 pin female)
Summary of the content on the page No. 16
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 3.3 Hardware Setup Procedure Before using your computer, you must complete the following steps: • Check Motherboard Settings • Install Memory Modules • Install the Central Processing Unit (CPU) • Install Expansion Cards • Connect Ribbon Cables, Panel Wires, and Power Supply 3.4 Motherboard Settings This section explains in detail how to change your motherboard’s function settings through the use of switches and/or jumpers. WARNING! Computer mot
Summary of the content on the page No. 17
3. HARDWARE SETUP ™ 1) JumperFree Mode (JEN) ™ This jumper enableS or disableS the JumperFree mode. The default enables ™ JumperFree mode, which permits processor frequency settings through the BIOS ™ setup (see 4.4 Advanced Menu). Disabling JumperFree mode permits manual frequency settings using JP0-JP3; (see the following page). ™ IMPORTANT: In JumperFree mode, all jumpers must be set to [1-2]. 3 2 1 JEN 12 1 2 TUSI-M JumperFree Mode Jumper Mode TUSI-M JumperFree™ Mode Setting 2) USB Device
Summary of the content on the page No. 18
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 3) CPU External Frequency Setting (JP3, JP1, JP2, JP0) This option tells the clock generator what frequency to send to the CPU, SDRAM, and the chipset. This allows the selection of the CPU’s External frequency. The CPU External Frequency multiplied by the Frequency Multiple equals the CPU’s Internal frequency (the advertised CPU speed). (NOTE: To make adjustments using these jumpers, the JumperFree mode must ™ be disabled; (see the JumperFree J
Summary of the content on the page No. 19
3. HARDWARE SETUP Manual CPU Settings Table Set the jumpers according to the internal speed of your processor as follows: CPU SDRAM Frequency Selection Switches (MHz) (MHz) JP3 JP1 JP2 JP0 66 100 [1-2] [1-2] [1-2] [1-2] 100 100 [1-2] [1-2] [1-2] [2-3] 150 100 [1-2] [2-3] [1-2] [1-2] 133 100 [1-2] [2-3] [1-2] [2-3] 100 133 [1-2] [1-2] [2-3] [2-3] 100 150 [1-2] [2-3] [2-3] [1-2] 133 133 [1-2] [2-3] [2-3] [2-3] 66 66 [2-3] [1-2] [1-2] [1-2] 97 97 [2-3] [1-2] [1-2] [2-3] 70 105 [2-3] [2-3] [1-2] [1-
Summary of the content on the page No. 20
3. H/W SETUP System Memory 3. HARDWARE SETUP 3.5 System Memory (DIMM) NOTE: No hardware or BIOS setup is required after adding or removing memory. This motherboard uses only Dual Inline Memory Modules (DIMMs). Sockets are available for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Ac- cess Memory (SDRAM) of 16, 32, 64, 128MB, 256 or 512MB. to form a memory size between 16MB and 1GB. One side (with memory chips) of the DIMM takes up one row on the motherboard. This motherboard also
