Summary of the content on the page No. 1
Product Manual
®
Barracuda 7200.9 Serial ATA
ST3160811AS
ST3160211AS
ST3120811AS
ST3120211AS
ST380811AS
ST380211AS
ST340211AS
100417177
Rev. C
August 2007
Summary of the content on the page No. 2
©2006-2007, Seagate Technology LLC All rights reserved. Publication number: 100417177, Rev. C August 2007 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property
Summary of the content on the page No. 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary tables . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
ii Barracuda 7200.9 Serial ATA Product Manual, Rev. C
Summary of the content on the page No. 5
List of Figures Figure 1. Typical 5V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Figure 2. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Figure 3. Serial ATA connectors and jumper options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 4. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
Summary of the content on the page No. 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Barracuda 7200.9 Serial ATA model drives: ST3160811AS ST3120811AS ST380811AS ST340211AS ST3160211AS ST3120211AS ST380211AS These drives provide the following key features: � 7,200 RPM spindle speed. � High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second). � Tunneling Magnetoresistive (TMR) recording heads provide the drives with increased areal densi
Summary of the content on the page No. 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: � Easy installation and configuration with true plug-and-play connectivity. � Thinner and more flexible cabling for improved enclosure airflow and ease of installation. � Scalability to higher performance levels. In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA w
Summary of the content on the page No. 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST3160811AS ST3120811AS ST380811AS ST340211AS ST3160211AS ST3120211AS ST380211AS 2.1 Specification summary tables The specifications listed in the following table are for quick reference. For details on specification measurement or def
Summary of the content on the page No. 10
Table 1: Drive specifications summary for 160 Gbyte models Drive specification ST3160811AS ST3160211AS Formatted Gbytes (512 bytes/sector)* 160 Heads 2 Discs 1 Guaranteed sectors 312,581,808 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density, KBPI (kbits/in max) 756.09 Track density, KTPI (ktracks/in avg.) 141.95 2 Areal density, (Gbits/in avg) 103.8 Spindle speed (RPM) 7,200 Internal data transfer rate (Mbits/sec max) 867.2
Summary of the content on the page No. 11
Drive specification ST3160811AS ST3160211AS Vibration, nonoperating 5–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 5.0 Gs 350–500 Hz:: 1.0 Gs Drive acoustics, sound power (bels) Idle** 2.7 (typical) 2.8 (max) Seek 2.9 (typical) 3.1 (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.34% Warranty 5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/suppor
Summary of the content on the page No. 12
Table 2: Drive specifications summary for 120 Gbyte models Drive specification ST3120811AS ST3120211AS Formatted Gbytes (512 bytes/sector)* 120 Heads 2 Discs 1 Guaranteed sectors 234,441,648 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density, KBPI (kbits/in max) 756.09 Track density, KTPI (ktracks/in avg.) 141.95 2 Areal density, (Gbits/in avg) 103.8 Spindle speed (RPM) 7,200 Internal data transfer rate (Mbits/sec max) 867.2
Summary of the content on the page No. 13
Drive specification ST3120811AS ST3120211AS Vibration, nonoperating 5–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 5.0 Gs 350–500 Hz:: 1.0 Gs Drive acoustics, sound power (bels) Idle** 2.7 (typical) 2.8 (max) Seek 2.9 (typical) 3.1 (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.34% Warranty 5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/suppor
Summary of the content on the page No. 14
Table 3: Drive specifications summary for 80 and 40 Gbyte models Drive specification ST380811AS ST380211AS ST340211AS Formatted Gbytes (512 bytes/sector)* 80 40 Heads 1 Discs 1 Guaranteed sectors 156,301,488 78,165,360 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density, KBPI (kbits/in max) 756.09 Track density, KTPI (ktracks/in avg.) 141.95 2 Areal density, (Gbits/in avg) 103.8 Spindle speed (RPM) 7,200 Internal data transfer
Summary of the content on the page No. 15
Drive specification ST380811AS ST380211AS ST340211AS Vibration, nonoperating 5–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 5.0 Gs 350–500 Hz:: 1.0 Gs Drive acoustics, sound power (bels) Idle** 2.7 (typical) 2.8 (max) Seek 2.9 (typical) 3.1 (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.34% Warranty 5 years on distribution units. To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.c
Summary of the content on the page No. 16
2.2 Formatted capacity Formatted Guaranteed Model capacity* sectors Bytes per sector ST3160811AS 160 Gbytes 312,581,808 512 ST3160211AS 160 Gbytes 312,581,808 512 ST3120811AS 120 Gbytes 234,441,648 512 ST3120211AS 120 Gbytes 234,441,648 512 ST380811AS 80 Gbytes 156,301,488 512 ST380211AS 80 Gbytes 156,301,488 512 ST340211AS 40 Gbytes 78,165,360 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and
Summary of the content on the page No. 17
2.4 Recording and interface technology Interface Serial ATA (SATA) Recording method 16/17 EPRML Recording density KBPI (kbits/inch max) 756.09 Track density KTPI (ktracks/inch avg) 141.95 2 Areal density (Gbits/inch avg) 103.8 Spindle speed (RPM) (± 0.2%) 7,200 Average latency (msec) 4.16 Internal data-transfer rate (Mbits/sec max) 867.2 Sustained data transfer rate OD (Mbytes/sec max) 80 I/O data-transfer rate (Mbytes/sec max) 300 Interleave 1:1 Cache buffer ST3160811AS 8 Mbytes (8,192 kbyte
Summary of the content on the page No. 18
2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: � Track-to-track seek time is an average of all possible single-track seeks in both directions. � Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead. Typical seek times (msec) Read Write Track-to-track <0.8 <1.0 Aver
Summary of the content on the page No. 19
2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 4 on page 24. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operat
Summary of the content on the page No. 20
2.8.1.1 Typical current profiles Figure 1. Typical 5V startup and operation current profile Figure 2. Typical 12V startup and operation current profile 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. � Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz
