Summary of the content on the page No. 1
®
Intel Solid-State Drive 320 Series
Product Specification
Form Factors: 1.8-inch and 2.5-inch Power
— Active (MobileMark* 2007 Workload):
Capacity:
150 mW (TYP)
— 80/160/300 GB (1.8-inch)
3
—Idle : 100 mW (TYP)
— 40/80/120/160/300/600 GB (2.5-inch)
Temperature
Components:
o o
®
—Operating: 0 C to 70 C
—Intel 25nm NAND Flash Memory
o o
— Non-Operating: -55 C to 95 C
— Multi-Level Cell (MLC)
1
Reliability
Bandwidth Performance
— Uncorrectable Bit Error Rate (UBER):
(Iometer* Que
Summary of the content on the page No. 2
L Ordering Information Contact your local Intel sales representative for ordering information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INT
Summary of the content on the page No. 3
® Intel Solid-State Drive 320 Series Contents 1.0 Overview...................................................................................................................5 2.0 Product Specifications ...............................................................................................6 2.1 Capacity ............................................................................................................6 2.2 Performance...............................................................
Summary of the content on the page No. 4
® Intel Solid-State Drive 320 Series ® Intel Solid-State Drive 320 Series Product Specification September 2011 4 Order Number: 325152-002US
Summary of the content on the page No. 5
® Intel Solid-State Drive 320 Series 1.0 Overview ® This document describes the specifications and capabilities of the Intel Solid-State ® Drive 320 Series (Intel SSD 320 Series). The Intel SSD 320 Series delivers leading performance for Serial Advanced Technology Attachment (SATA)-based computers in capacities up to 600 GB. By combining Intel's leading 25nm NAND Flash Memory technology with SATA 3Gb/s interface support, the Intel SSD 320 Series delivers sequential read speeds of up to 270 M
Summary of the content on the page No. 6
® ® Inte Intell S So olid lid-State Driv -State Drive 320 S e 320 Se eri ries es 2.0 Product Specifications 2.1 Capacity Table 1. User Addressable Sectors Unformatted Capacity Intel SSD 320 Series (Total User Addressable Sectors in LBA Mode) 40 GB 78,165,360 80 GB 156,301,488 120 GB 234,441,648 160 GB 312,581,808 300 GB 586,072,368 600 GB 1,172,123,568 Notes: 1 GB = 1,000,000,000 bytes; 1 sector = 512 bytes. LBA count shown represents total user storage capacity and will remain the same through
Summary of the content on the page No. 7
® Intel Solid-State Drive 320 Series 2.3 Electrical Characteristics Table 5. Operating Voltage and Power Consumption Electrical Characteristics Value Operating Voltage for 5 V (+/- 5%) Min 4.75 V Max 5.25 V Power Consumption (Typical) 1 Active 150 mW 2 Idle 100 mW Notes: 1. Active power measured during execution of MobileMark* 2007 with Device Initiated Power Management (DIPM) enabled. 2. Idle power defined as SSD at idle with DIPM enabled. 2.4 Environmental Conditions Table 6. Temperature, Shoc
Summary of the content on the page No. 8
® ® Inte Intell S So olid lid-State Driv -State Drive 320 S e 320 Se eri ries es 2.5 Product Regulatory Compliance The Intel SSD 320 Series meets or exceeds the regulatory or certification requirements in Table 7. Table 7. Product Regulatory Compliance Specifications Region for which Title Description conformity declared European Union Low Voltage EN 60950-1 2nd edition for Information Technology Equipment - European Union Directive (LVD) 2006/95/EC Safety - Part 1: General Requirements UL/CS
Summary of the content on the page No. 9
® Intel Solid-State Drive 320 Series 2.6 Reliability The Intel SSD 320 Series meets or exceeds SSD endurance and data retention requirements as specified in the JESD218 specification. Reliability specifications are listed in Table 8. Table 8. Reliability Specifications Parameter Value 16 Uncorrectable Bit Error Rate (UBER) 1 sector in 10 bits read, max Uncorrectable bit error rate will not exceed one sector in the specified number of bits read. In the unlikely event of a nonrecoverable read
Summary of the content on the page No. 10
® ® Inte Intell S So olid lid-State Driv -State Drive 320 S e 320 Se eri ries es 3.0 Mechanical Information 3.1 1.8-inch Form Factor Figure 1 shows the physical package information for the 1.8-inch Intel SSD 320 Series. All dimensions are in millimeters. Figure 1. Dimensions for 1.8-inch Form Factor 2,500 1,350 1,650 DETAIL A 78.50 0.60 3.30 0.35 SCALE 5 : 1 A 5.00 0.35 ® Intel Solid-State Drive 320 Series Product Specification September 2011 10 Order Number: 325152-002US 54.00
Summary of the content on the page No. 11
® Intel Solid-State Drive 320 Series 3.2 2.5-inch Form Factors Figure 2 shows the physical package information for the 7mm height 2.5-inch Intel SSD 320 Series. All dimensions are in millimeters. Figure 2. Dimensions for 7mm 2.5-inch Form Factor ® Intel Solid-State Drive 320 Series September 2011 Product Specification Order Number: 325152-002US 11
Summary of the content on the page No. 12
® ® Inte Intell S So olid lid-State Driv -State Drive 320 S e 320 Se eri ries es Figure 3 shows the physical package information for the 9.5mm height 2.5-inch Intel SSD 320 Series. All dimensions are in millimeters. Figure 3. Dimensions for 9.5mm 2.5-inch Form Factor ® Intel Solid-State Drive 320 Series Product Specification September 2011 12 Order Number: 325152-002US
Summary of the content on the page No. 13
® Intel Solid-State Drive 320 Series 4.0 Pin and Signal Descriptions 4.1 Pin Locations 4.1.1 1.8-inch Form Factor Pin Locations Figure 4. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 4.1.2 2.5-inch Form Factor Pin Locations Figure 5. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 Note: 2.5-inch connector supports in-built latching capability. ® Intel Solid-State Drive 320 Series September 2011 Product Specification Order Number: 325152-00
Summary of the content on the page No. 14
® ® Inte Intell S So olid lid-State Driv -State Drive 320 S e 320 Se eri ries es 4.2 Signal Descriptions 4.2.1 Connector Pin Signal Definitions Table 9. Serial ATA Connector Pin Signal Definitions — 1.8-inch and 2.5-inch Form Factors Pin Function Definition S1 Ground 1st mate S2 A+ Differential signal pair A S3 A- S4 Ground 1st mate S5 B- Differential signal pair B S6 B+ S7 Ground 1st mate Note: Key and spacing separate signal and power segments. 4.2.2 Power Pin Signal Definitions Table 10. Ser
Summary of the content on the page No. 15
® Intel Solid-State Drive 320 Series Table 11. Serial ATA Power Pin Definitions — 2.5-inch Form Factor 1 Pin Function Definition Mating Order 2 P1 Not connected (3.3 V Power) 2 P2 Not connected (3.3 V Power) 2 P3 Not connected (3.3 V Power; pre-charge) 2nd Mate 3,4 P4 Ground 1st Mate 3 P5 Ground 1st Mate 3 P6 Ground 1st Mate 3,5 P7 V 5 V Power 1st Mate 5 3,5 P8 V 5 V Power 2nd Mate 5 3,5 P9 V 5 V Power 2nd Mate 5 3 P10 Ground 1st Mate 6 P11 DAS Device Activity Signal 2nd Mate 3, 4 P12 Ground 1st
Summary of the content on the page No. 16
® ® Inte Intell S So olid lid-State Driv -State Drive 320 S e 320 Se eri ries es 5.0 Supported Command Sets The Intel SSD 320 Series supports all the mandatory ATA (Advanced Technology Attachment) commands defined in the ATA8-ACS specification described in this section. 5.1 ATA General Feature Command Set The Intel SSD 320 Series supports the ATA General Feature command set (non- PACKET), which consists of: • EXECUTE DEVICE DIAGNOSTIC • FLUSH CACHE •IDENTIFY DEVICE Note: See Appendix A, “IDENTI
Summary of the content on the page No. 17
® Intel Solid-State Drive 320 Series 5.3 Security Mode Feature Set The Intel SSD 320 Series supports the Security Mode command set, which consists of: •SECURITY SET PASSWORD • SECURITY UNLOCK • SECURITY ERASE PREPARE • SECURITY ERASE UNIT • SECURITY FREEZE LOCK • SECURITY DISABLE PASSWORD 5.4 SMART Command Set The Intel SSD 320 Series supports the SMART command set, which consists of: •SMART READ DATA •SMART READ ATTRIBUTE THRESHOLDS • SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE • SMART SAVE ATTRIBU
Summary of the content on the page No. 18
® ® Inte Intell S So olid lid-State Driv -State Drive 320 S e 320 Se eri ries es 5.4.1 SMART Attributes Table 12 lists the SMART attributes supported by the Intel SSD 320 Series and the corresponding status flags and threshold settings. Table 12. SMART Attributes Status Flags ID Attribute Threshold SP EC ER PE OC PW Spin Up Time 03h 100000 0 (none) Reports a fixed value of zero (0). Start/Stop Count 04h 110000 0 (none) Reports a fixed value of zero (0). Re-allocated Sector Count The raw value o
Summary of the content on the page No. 19
® Intel Solid-State Drive 320 Series Table 12. SMART Attributes (Continued) Status Flags ID Attribute Threshold SP EC ER PE OC PW CRC Error Count 1 The total number of encountered SATA C7h 110010 0 (none) interface cyclic redundancy check (CRC) errors. Host Writes The raw value of this attribute reports the total number of sectors written by the host E1h 110010 0 (none) system. The raw value is increased by 1 for every 65,536 sectors (32MB) written by the host. Timed Workload Media Wear Measure
Summary of the content on the page No. 20
® ® Inte Intell S So olid lid-State Driv -State Drive 320 S e 320 Se eri ries es 5.4.2 SMART Logs The Intel SSD 320 Series implements the following Log Addresses: 00h, 02h, 03h, 06h, and 07h. The Intel SSD 320 Series implements host vendor specific logs (addresses 80h-9Fh) as read and write scratchpads, where the default value is zero (0). Intel SSD 320 Series does not write any specific values to these logs unless directed by the host through the appropriate commands. The Intel SSD 320 Se
