Summary of the content on the page No. 1
USB
™
BusStation
MODELS F5U100, F5U100-BLU,
F5U100-SLV, F5U100-ORG
User Manual
P73281
Summary of the content on the page No. 2
Introduction ™ THE BELKIN BUSSTATION It is the first USB system designed to adapt to the way you work. Its innovative, patented modular design gives you the ability to create and customize your own USB environment. It comes standard as a 7 port hub and is the best 7 port USB hub available because it has the most the unique vertical modular design requiring a minimum of your precious desktop space. As a 7-port hub, it allows you to connect up to seven USB keyboards, mice, joysticks, printers, sca
Summary of the content on the page No. 3
Features • 7 port hub (standard configuration). Connect up to 7 devices to a single USB port on your computer. • Modular – 4 port hub base with three removable modules each having one USB port. • Customizable. Add and subtract components from a complete selection of modules. • Gives you the ability to configure your own multifunction hub or docking station to fit your own computing needs. • Works with the Belkin complete selection of modules that cover virtually every possible configuration. ® ®
Summary of the content on the page No. 4
™ Belkin BusStation Figure 1 • LEDs to • 3 Removable indicate modules status Front View • Downstream ports • DC 5V 4A • Root port power jack Back View 4
Summary of the content on the page No. 5
™ Belkin BusStation SYSTEM REQUIREMENTS ® ® • Macintosh or Windows computer with USB capabilities ® ® ® ® • Windows 95 Rev. B, Windows 98, Windows 2000, Mac OS 8.1 or higher PACKAGE INCLUDES ™ • Belkin BusStation • USB Device Cable • 5 Volt 4 Amp power adapter • User Guide Installation 1. Attach the power adapter to the power jack ™ of the BusStation and an electrical outlet. (See Figure 2). 2. Connect the USB-B connector of the USB Device Cable into ™ the Root Port of the BusStation . (See Fig
Summary of the content on the page No. 6
Installation (cont’d.) Figure 2 Figure 3 Figure 4 ™ Adding Modules to the BusStation ™ By adding modules to the BusStation , you can have your own custom-configured multi-function USB hub or docking station. You can add and subtract components from a complete selection of modules that cover virtually every possible configuration. Need Ethernet? Snap an Ethernet module in. Need more USB ports? Add a 4 Port USB hub. Choose from a variety of stand-alone USB modules including SCSI ports, Ethernet po
Summary of the content on the page No. 7
Instructions for Adding Modules Removing the sleeve from the Belkin USB Module: 1. Hold the module in both hands. Pull one side of the sleeve outward. (See Figure 5). 2. The sleeve should slide off easily. Figure 5 7
Summary of the content on the page No. 8
Instruction for Adding Modules (cont’d.) ™ When attaching additional modules to the BusStation , there is no need to power down your computer, or unplug the ™ BusStation . Note on Power Consumption USB specifies that each port can only draw a maximum of 500mA of electrical current. If a device draws more than that amount, the Bus Station's built-in "Overcurrent Protection" will shut off that port, and prevent damage to the device and the Bus Station. ™ When you first purchase the BusStation , i
Summary of the content on the page No. 9
Note: Modules should only be added starting from the 4 Port Hub base of the module working your way up. 1. Remove the sleeve from the USB module following the instructions in Figure 5. 2. Place the module you wish to add in the first empty slot directly above the 4 Port hub. ™ 3. Do not force the module into the BusStation . ™ As you slide the module into the BusStation it should securely lock onto the guide track of the one below it. ™ 4. Gently slide the module into the BusStation bay until y
Summary of the content on the page No. 10
Removing Modules ™ Instructions for removing modules from the BusStation Note: Modules should be removed from top to bottom. Do not remove the middle modules first, doing so will cause severe damage to your equipment and/or the ™ BusStation . ™ 1. Hold the BusStation away from you so that the connectors are facing you. (See Figure 7). ™ 2. Using both of your thumbs, push the BusStation module out ™ of the BusStation bay. (See Figure 7) 3. The module should slide out smoothly. Figure 7 Modules sh
Summary of the content on the page No. 11
Technical Specifications • Upstream Ports (1) • Unit Weight 14.5 oz 3 1 • Downstream Ports (7) • Dimension (L x W x H) 3 /4 x 4 /4 x 5 • Removable modules (3) • Power Supply DC 5V 4A • LED (1) Power, • FCC (7) Downstream • CD Power • ICES • Per-Port Voltage DC +5V • Belkin Warranty • Per-Port Current 500mA (max) • Operation Temperature 5°C~40°C • Stock Temperature -20°C~60°C • Humidity 0%~80% RH noncondensing • Enclosure ABS Plastic Available modules • USB 4 Port Hub • USB 4 Port Hub with color
Summary of the content on the page No. 12
belkin.com Belkin Components 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants • NN3 8RX • UK Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B.V. Diamantlaan 8 • 2132 WV Hoofddorp • The Netherlands Tel: +31 (0) 235698765 Fax: +31 (0) 235612694 © 2000 Belkin Components. All Rights Reserved. All Trade Names Are Registered Trademarks Of Respective Manufac
