Summary of the content on the page No. 1
4-Port Enhanced Digital USB
KVM Switch Over IP
with File Transfer
SV441DUSBI
Instruction Manual
Summary of the content on the page No. 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea- sonable protection against harmful interference in a residential installation. This equip- ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com- munications. However, there is n
Summary of the content on the page No. 3
Instruction Manual Instruction Manual Table of Contents Introduction .................................................................... 1 Features ......................................................................................2 Package Contents .......................................................................3 Hardware Guide ............................................................... 4 Front Panel ...............................................................................
Summary of the content on the page No. 4
Instruction Manual Compatibility ................................................................................25 SNMP ..........................................................................................25 RADIUS .......................................................................................25 Modem.........................................................................................26 Serial Ports ...............................................................................
Summary of the content on the page No. 5
Instruction Manual Accessing KVM Features ............................................... 38 OSD Operations ..........................................................................38 OSD Function Keys .....................................................................39 Hot Key Commands.....................................................................42 Changing Your Configuration .......................................................43 Optimizing video performance ......................
Summary of the content on the page No. 6
Instruction Manual About Security Certificate Warnings ............................................58 Installing the New Certificate .......................................................59 Troubleshooting .............................................................. 60 Specifications .................................................................. 62 General Specifications .................................................................62 Supported Protocols ...............................
Summary of the content on the page No. 7
Instruction Manual Introduction Thank you for purchasing a StarTech.com 4-Port IP KVM Switch with USB Console. The SV441DUSBI revolutionizes remote server manage- ment by combining our industry-leading, third generation Server Remote Control technology with a proven Enterprise class digital KVM switch. The SV441DUSBI empowers you to securely manage up to four comput- ers remotely from almost anywhere using the internet or your local area network (LAN). Unlike software solutions that require
Summary of the content on the page No. 8
Instruction Manual Features • Able to connect to USB devices such as a keyboard, mouse, USB hard drive, USB CD-ROM, or USB flash drive • Access to the web console is user ID and SSL password secure. The Remote Server Management over IP supports 32 user accounts and incorporates SSL encryption of session data, and SSL web communication encryption • Allows for disk emulation and file transfers, including complete remote application and operating system installations • Auto S
Summary of the content on the page No. 9
Instruction Manual Package Contents • 1 x SV441DUSBI • 1 x User’s Manual • 4 x KVM Cables • 1 x Package of screws • 1 x Power Adapter • 1 x Power Cord 3
Summary of the content on the page No. 10
Instruction Manual Hardware Guide Front Panel 2 4 6 8 1 3 5 7 9 1. Power Supply Connects to a DC 12V power adapter. 2. HDB15 Connector Connect to the console monitor. 3. USB Type A Connectors Connect to the console keyboard and mouse ports. 4. Port LED Indicator Displays the status of connected PCs (for more specific instructions, see the table below). 5. Setup Button Press this button to bring up the IP-OSD menu. 6. RJ-4
Summary of the content on the page No. 11
Instruction Manual LED Color Meaning Connected to a PC that is powered on and Green + Blue (Light Blue) possesses the data-transfer function. The selected port possesses the data- Red + Blue (Light Purple) transfer function. Red + Green (Yellow) The PC that is powered on is selected. The selected and powered on PC Red + Green + Blue (White) possesses the data-transfer function. Rear Panel 2 1 3 1. R-Port For serial device management with Serial Supervisor. 2. USB Type A
Summary of the content on the page No. 12
Instruction Manual Installation Device Connection 1. Connect the USB keyboard, mouse, and monitor to the console connectors on the SV441DUSBI. 2. Connect a Cat5 cable to the LAN port of the SV441DUSBI. 6
Summary of the content on the page No. 13
Instruction Manual 3. Power up the monitor and the SV441DUSBI. The IP-OSD menu should come up automatically. Follow the on-screen instructions to finish the initial setup. Initial Power-Up You must power up the SV441DUSBI with a keyboard, mouse, and moni- tor connected before turning on any other devices. Ensure that the devices you are connecting are powered off before con- necting them to the unit. 7
Summary of the content on the page No. 14
Instruction Manual Operation Initial IP-OSD Setting Power on the monitor and the SV441DUSBI. The IP-OSD menu will automatically appear. Follow the on-screen instructions to complete the initial setup. Press the Enter key to enter the Advanced Settings Menu. Once the desired settings have been achieved, press ESC to close the Menu. It is reccomended that you change the password immediately and make a note of it. Press Enter to go to the next menu. 8
Summary of the content on the page No. 15
Instruction Manual The IP KVM can have its IP address assigned dynamically, or it can be given a fixed IP address. If you are unaware of the IP address, obtain it from the network administrator. Press Enter to go to the next menu. Enter the Netmask (Consult your network administrator if necessary). Enter the Gateway (Consult your network administrator if necessary). 9
Summary of the content on the page No. 16
Instruction Manual Enter the address (Consult your net- work administrator if necessary). Wait for the SV441DUSBI to apply the setting changes. Press the Enter key. Press Enter to complete the setting process. 10
Summary of the content on the page No. 17
Instruction Manual Mouse Setting Many operating systems offer a feature called mouse acceleration that allows the user to adjust the responsiveness of the cursor on the screen to the physical movements of the mouse. While this is usually a beneficial interface enhancement, it can interfere with the operation of the unit and should be disabled on the managed computers before a remote session is attempted. Follow the instructions below to disable mouse acceleration for the operating system i
Summary of the content on the page No. 18
Instruction Manual KVM Switch OSD Operation To enter the Hotkey Menu, press the Ctrl key twice within two seconds. • L-CTRL is the Ctrl key located on the left side of the keyboard. • 1~8/A~H are the number keys 1-8 located in the upper row of the keyboard, and the character keys A-H (not case sensitive). Please Note: Do not use the keypad at the right of the keyboard. To enter the KVM Menu, press the Ctrl key three times within two seconds. Once entered, the menu will display a list of
Summary of the content on the page No. 19
Instruction Manual To access additional menu functions, press the F4 key. A new screen will appear displaying more functions, as shown below. To access the remaining menu functions, press the F4 key again. This will bring you to the screen shown below. Data-Transfer Rule Manual stick-on: Data-Transfer function resides in one particular KVM- Channel, pressing Ctrl + Ctrl + T to switch to the next KVM-Channel. 13
Summary of the content on the page No. 20
Instruction Manual Tracking KVM-Channel: Data-Transfer function tracks the selected KVM- Channel. USB Port Rule Manual stick-on: USB-Port resides in one particular KVM-Channel, pressing Ctrl + Ctrl + U to switch to the next KVM-Channel. Tracking KVM-Channel: USB-Port tracks the selected KVM-Channel. 14
