Summary of the content on the page No. 1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
U Series CE Family
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST380020ACE, ST360020ACE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST340810ACE, ST320410ACE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ultra ATA Interface Drives
. . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 2
Summary of the content on the page No. 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U Series CE Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ST380020ACE, ST360020ACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ST340810ACE, ST320410ACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ultra ATA Interface Drives . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
2001 Seagate Technology LLC All rights reserved Publication Number: 100140718, Rev. A, July 2001 Seagate, Seagate Technology and the Seagate logo are registered trademarks of Seagate Technology LLC. SeaShield, SeaShell and U Series CE are either registered trademarks or trademarks of Seagate Technology LLC. Other product names are registered trademarks or trademarks of their owners. Seagate reserves the right to change, without notice, product offerings or specifications. No part of this publi
Summary of the content on the page No. 5
U Series CE Family Product Manual, Rev. A iii Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specification summary table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1.1 Default logical geometry . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
iv U Series CE Family Product Manual, Rev. A 1.12.3 FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2.0 Configuring and mounting the drive . . . . . . . . . . . . . . . . . . . 17 2.1 Handling and static-discharge precautions . . . . . . . . . . . . . . 17 2.2 Jumper settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2.2.1 Master/slave configuration . . . . . . . . . . . . . . . . . . . . . . 18 2.2.2 Cable-select option . . . .
Summary of the content on the page No. 7
U Series CE Family Product Manual, Rev. A v Figures Figure 1. Typical startup and operation current profile . . . . . . . . . . . . 9 Figure 2. Master/slave jumper settings . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 3. Mounting dimensions—top, side and end view . . . . . . . . . 20 Figure 4. I/O pins and supported ATA signals. . . . . . . . . . . . . . . . . . 22
Summary of the content on the page No. 8
vi U Series CE Family Product Manual, Rev. A
Summary of the content on the page No. 9
U Series CE Family Product Manual, Rev. A 1 Introduction This manual describes the functional, mechanical and interface specifi- cations for the ST380020ACE, ST360020ACE, ST340810ACE and the ST320410ACE. These drives provide the following key features: • 8.9 msec seek time, 5,400-RPM and 2-Mbyte buffer combine for excellent desktop performance Low power consumption High instantaneous (burst) data-transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 5 Giant magnetoresistive (G
Summary of the content on the page No. 10
2 U Series CE Family Product Manual, Rev. A Specification summary table The specifications listed in this table are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual. Drive Specification ST380020ACE ST360020ACE ST340810ACE ST320410ACE Formatted Gbytes 80 60 40 20 6 (×10 bytes) Guaranteed sectors 156,301,488 117,231,408 78,165,360 39,102,336 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default
Summary of the content on the page No. 11
U Series CE Family Product Manual, Rev. A 3 Drive Specification ST380020ACE ST360020ACE ST340810ACE ST320410ACE Track-to-track seek time (msec typical) 1.2 (read) 2.0 (write) Average seek time (msec typical) 8.9 Average seek read (msec typical) 9.9 Average seek write (msec typical) 10.9 Full-stroke seek time (msec typical) 22.0 (read) 24.0 (write) Average latency (msec) 5.55 msec Power-on to ready (sec typical) 6.5 sec Standby to ready (sec typical) 6.5 sec Spindown (sec typical) 10 sec S
Summary of the content on the page No. 12
4 U Series CE Family Product Manual, Rev. A Drive Specification ST380020ACE ST360020ACE ST340810ACE ST320410ACE Altitude (meters be- low mean sea level, max) –121.92 m to 12,192 m (–400 ft to 40,000+ ft) Shock, operating (Gs max at 2 msec) 63 Gs Shock, nonoperating (Gs max at 1 and 2 msec) 350 Gs Vibration, operating 0.5 Gs (0 to peak, 22–350 Hz) Vibration, nonoperating 5 Gs (0 to peak, 22–350 Hz) Drive acoustics Sound power in bels 2.7 (typical), 3.0 (max) Idle mode 2.9 (typical), 3.2 (max)
Summary of the content on the page No. 13
U Series CE Family Product Manual, Rev. A 5 1.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the ST380020ACE, ST360010ACE, ST340810ACE and the ST320410ACE. 1.1 Formatted capacity Drive Model Formatted Gbytes Guaranteed Bytes per sectors sector ST380020ACE 80 156,301,488 512 ST360020ACE 60 117,231,408 512 ST3408
Summary of the content on the page No. 14
6 U Series CE Family Product Manual, Rev. A 1.2 Physical organization Drive Model Read/Write heads (GMR) Number of discs ST380020ACE 4 2 ST360020ACE 3 2 ST340810ACE 2 1 ST320410ACE 1 1 1.3 Recording and interface technology Interface ATA Recording method 96/102 GPRML Recording density BPI (bits/inch) 562,436 Track density TPI (tracks/inch) 58,000 2 Areal density (Mbits/inch max) 32,622 Spindle speed (RPM) (± 0.2%) 5,400 Internal data-transfer rate (Mbits/sec max) 436 I/O data-transfer rate 16.
Summary of the content on the page No. 15
U Series CE Family Product Manual, Rev. A 7 1.5 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The spec- ifications in the table below are defined as follows: Track-to-track seek time is an average of all possible single-track seeks in both directions. Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead. Full-stroke seek
Summary of the content on the page No. 16
8 U Series CE Family Product Manual, Rev. A 1.7 Power specifications The drive receives DC power (+5V or +12V) through a four-pin standard drive power connector. 1.7.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V input voltage at 25°C ambient temperature. Spinup power Spinup power is measured from the time of power-on to the time that the drive s
Summary of the content on the page No. 17
U Series CE Family Product Manual, Rev. A 9 Typical Amps Means Power Mode Typical Watts 5V 12V Spinup — 0.75 2.5 Seek (Random, no read/write) Performance mode 7.5 0.83 0.279 Operating (read/write) Performance mode 7.5 0.94 0.233 Idle 5.0 0.63 0.154 Standby 1.2 0.2 0.017 Sleep 0.9 0.15 0.0125 1.7.1.1 Typical current profile Current (amps) 2.0 1.5 1.0 0.5 0 -0.5 -1.0 -1.5 -2.0 1 2 3 4 5 6 7 Time (seconds) Figure 1. Typical startup and operation current profile
Summary of the content on the page No. 18
10 U Series CE Family Product Manual, Rev. A 1.7.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave i
Summary of the content on the page No. 19
U Series CE Family Product Manual, Rev. A 11 established using a Standby or Idle command. In Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary. Sleep mode The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it re
Summary of the content on the page No. 20
12 U Series CE Family Product Manual, Rev. A 1.8.3 Humidity 1.8.3.1 Relative Humidity Operating 5% to 90% noncondensing (30% per hour max) Nonoperating 5% to 95% noncondensing (30% per hour max) 1.8.3.2 Wet bulb temperature Operating 29.4°C (84°F) max Nonoperating 40.0°C (104°F) max 1.8.4 Altitude Operating –60.96 m to 3,048 m (–200 ft to 10,000+ ft) Nonoperating –121.92 m to 12,192 m (–400 ft to 40,000+ ft) 1.8.5 Shock All shock specifications assume that the drive is mounted securely wi
