Summary of the content on the page No. 1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HAWK 2XL Family:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST32151N/W/WC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST31051N/W/WC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST32155N/W/WC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST31055N/W/WC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 2
Contents Preface ........................................................................... 1 Electromagnetic interference..................................... 1 Things you may need to install the drive................... 3 Before you begin ............................................................ 6 Drive configuration ......................................................... 10 Set drive ID ................................................................ 11 Select operating features........
Summary of the content on the page No. 3
Hawk 2XL Family Installation Guide, Rev. C 1 ___________________________________________________________________________________________________________________ Preface This manual is organized to assist you in the installation and operation of your Seagate Hawk 2XL Family disc drive. Family models are listed in Hawk 2XL Family Product Information section. It also provides information to aid in obtaining service for the drive. Before attempting any installation, please re
Summary of the content on the page No. 4
2 Hawk 2XL Family Installation Guide, Rev. C _______________________________________________________________________________________________________________________ The physical design characteristics of the drive models de- scribed herein, serve to minimize EMI radiation when installed in an enclosure that provides reasonable shielding. As such, the drive(s) are capable of meeting the Class B limits of the FCC Rules and the Regulations of the Canadian Department of Comm
Summary of the content on the page No. 5
Hawk 2XL Family Installation Guide, Rev. C 3 _______________________________________________________________________________________________________________________ You may find helpful the following booklet prepared by the FCC: How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the Superintendent of Documents, US Government Printing Office, Washington, DC 20402. Refer to publication number 004-000-00345-4. Things you may need to install th
Summary of the content on the page No. 6
4 Hawk 2XL Family Installation Guide, Rev. C _______________________________________________________________________________________________________________________ • A SCSI* host adapter card for the PC You may need this if your computer does not already have a hard drive, if your present drive does not connect to a SCSI host adapter, or if your present SCSI adapter card cannot address a drive having the capacity the Hawk 2XL has. The host adapter card should have instructions with
Summary of the content on the page No. 7
Hawk 2XL Family Installation Guide, Rev. C 5 ___________________________________________________________________________________________________________________ • A frame kit You will need a frame kit if you wish to mount a 3.5-inch disc drive in a 5.25-inch drive bay. • Extra configuration jumpers A small plastic bag of two types of configuration jumpers is included in drive package. Figure 1. Two drive I/O cable Figure 2. Y-shaped power cable
Summary of the content on the page No. 8
6 Hawk 2XL Family Installation Guide, Rev. C __________________________________________________ Before you begin Verify that the system is switched off but remains connected to the main power before any installation is attempted. Protect yourself, the drive, and your valuable programs and data by reading the following cautions and warnings. • Do not tamper with sealed top cover. Doing so voids your warranty. The drive contains no user serviceable compo- nents. See Produc
Summary of the content on the page No. 9
Hawk 2XL Family Installation Guide, Rev. C 7 _______________________________________________________________________________________________________________________ • When transporting or shipping a drive or system, please ensure that they are correctly packed in original Seagate approved (or equivalent) container and shipped via an air- ride carrier experienced in handling computer equipment. • Do not unpack drive from its static shielded bag until you are ready to inst
Summary of the content on the page No. 10
8 Hawk 2XL Family Installation Guide, Rev. C _______________________________________________________________________________________________________________________ Safety instructions 1. The disc drive is to be installed in a customer supplied enclosure where the surrounding air does not exceed o 50 C. 2. Four (4) 6-32 UNC-2A screws are required for installation. Maximum screw length into side of drive is 0.15 inches (9/ 64 inch) (3.81 mm). Maximum screw length into b
Summary of the content on the page No. 11
Hawk 2XL Family Installation Guide, Rev. C 9 _______________________________________________________________________________________________________________________ Sicherheitsanleitung 1. Däs Gerät ist ein Einbaugerät, vorgesehen für eine maximale o Umgebungstemperatur von 50 C. 2. Zur Befestigung der Drive werden 4 Schrauben benötigt (6- 32 UNC-2A). Die maximale Länge der Schrauben in der unteren Seite des Chassis darf nicht mehr als 0.20 in (5.08 mm) betragen, die in
Summary of the content on the page No. 12
10 Hawk 2XL Family Installation Guide, Rev. C _______________________________________________________________________________________________________________________ Drive configuration You can easily install your new Seagate disc drive as your first ever hard drive, a replacement or as a second drive in a com- puter system with an existing hard disc drive. Installation involves the following steps: • Drive configuration • Mounting • Informing the computer about your drive and how y
Summary of the content on the page No. 13
Hawk 2XL Family Installation Guide, Rev. C 11 _______________________________________________________________________________________________________________________ Caution. Note that the jumper plugs used on J2 are shaped differently and are smaller than those used on J6 or J1-Auxiliary. Do not use J2 plugs on J6 or J1-Auxil- iary as this will damage the internal contacts so they will not subsequently stay on J2. The presence or absence of these jumper plugs in various p
Summary of the content on the page No. 14
12 Hawk 2XL Family Installation Guide, Rev. C _______________________________________________________________________________________________________________________ Table 1. Drive configuration selections summary Model --- Connector --- Appl. Type Function J1 J6 J1-Aux J2 Figure N Drive ID X,Y none 3a N Drive Activity LED X,[3] none 3a N Option select none X 3d W Drive ID X,Y X,Y[5] 3b,3c[1] W Drive Activity LED Y[3] 3b W Option select X 3d WC Drive ID Y[6]
Summary of the content on the page No. 15
Hawk 2XL Family Installation Guide, Rev. C 13 _______________________________________________________________________________________________________________________ ("X" means the function selection can be made with jumpers on that connector; "Y" means the signal is available to host through that connec- tor). Notes[ ] for Table 1: [1] Use either J6 or J1-Aux, but not both. [2] I/O connector J1 plugs directly into host. No jumper can be installed on J1. The host supplies
Summary of the content on the page No. 16
14 Hawk 2XL Family Installation Guide, Rev. C _______________________________________________________________________________________________________________________ Select Operating Features If your new drive replaces an existing drive, you must set up the new drive to operate as the old drive did. Check the docu- mentation for your old drive to see how the drive was set to operate. Look at Figure 3d or 3e. Normally, you should leave off the "Delay Motor Start", "Enable M
Summary of the content on the page No. 17
Hawk 2XL Family Installation Guide, Rev. C 15 _______________________________________________________________________________________________________________________ Drive model "WC" plugs directly into a bulkhead or PCB mounted connector. Systems using these drives have made provisions for terminators and selecting most options, so only "Write Protect" and "Parity Disable" options (on J2) must be considered for possible setting by a person installing a replace- ment drive
Summary of the content on the page No. 18
16 Hawk 2XL Family Installation Guide, Rev. C _______________________________________________________________________________________________________________________ If your drive is to be connected at the cable connector that is not at the end of the cable (it is a second hard drive for your system), the "Terminator Enable" jumper should not be installed. Remove and store the jumper if there is one on the "Terminator Enable" position. If installing a "WC" model drive see
Summary of the content on the page No. 19
Hawk 2XL Family Installation Guide, Rev. C 17 _______________________________________________________________________________________________________________________ N drives Drive
Front Jumper Plug
(enlarged to
show detail) Pin 1 J6 PCB L
R
R
Reserved E
E
E
A A A D S S 2 1 0 SCSI ID = 0 (default) SCSI ID = 1 SCSI ID = 2 SCSI ID = 3 SCSI ID = 4 SCSI ID = 5 SCSI ID = 6 SCSI ID = 7 Drive Activity
Remote LED LED 11 Do not remove
12 cover or install
CATH any jumper
Summary of the content on the page No. 20
18 Hawk 2XL Family Installation Guide, Rev. C _______________________________________________________________________________________________________________________ W/WC drive Pin 1 J6 PCB Reserved A A A A 3 2 1 0 SCSI ID = 0 (default) SCSI ID = 1 SCSI ID = 2 Drive
Front SCSI ID = 3 SCSI ID = 4 SCSI ID = 5 SCSI ID = 6 SCSI ID = 7 PCB SCSI ID = 8 Jumper Plug
(enlarged to
SCSI ID = 9 show detail) SCSI ID = 10 SCSI ID = 11 SCSI ID = 12 SCSI ID = 13 SCSI ID = 14 Shipped with cover in
