Summary of the content on the page No. 1
Product Manual
®
Savvio 10K.5 FC
ST9900805FC
ST9600205FC
ST9450405FC
ST9300605FC
100628563
Rev. D
March 2011
Summary of the content on the page No. 2
Revision history Revision Date Sheets affected or comments Rev. A 10/22/10 Initial release. Rev. B 11/22/10 41. Rev. C 02/14/11 41. Rev. D 03/15/11 27 & 36. © 2011 Seagate Technology LLC. All rights reserved. Publication number: 100628563, Rev. D, March 2011 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Savvio 10K.5 and SeaTools are either trademarks or registered trademarks of Seagate Technology
Summary of the content on the page No. 3
Contents 1.0 Seagate Technology support services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3.0 Applicable standards and reference documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.1 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
7.4 Power dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 7.5 Environmental limits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 7.5.1 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 7.5.2 Relative humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 5
10.5.7 Fault LED Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 10.5.8 Active LED Out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 10.5.9 Enable port bypass signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 10.5.10 Motor start controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 10.5.11 SEL
Summary of the content on the page No. 6
iv Savvio 10K.5 FC Product Manual, Rev. D
Summary of the content on the page No. 7
1.0 Seagate Technology support services SEAGATE ONLINE SUPPORT and SERVICES For information regarding products and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: Presales & Technical support Global Support Services telephone numbers & business hours Authorized Service Centers For information regarding Warranty Support, visit http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance For information regarding Data Recovery Services,
Summary of the content on the page No. 8
2.0 Scope ® ® This manual describes Seagate Technology LLC, Savvio 10K.5 FC (Fibre Channel) disk drives. Savvio 10K.5 FC drives support the Fibre Channel Arbitrated Loop and SCSI Fibre Channel Protocol specifica- tions to the extent described in this manual. The Fibre Channel Interface Manual (part number 100293070) describes the general Fibre Channel Arbitrated Loop characteristics of this and other Seagate Fibre Channel drives. 2 Savvio 10K.5 FC Product Manual, Rev. D
Summary of the content on the page No. 9
3.0 Applicable standards and reference documentation The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. The drives depend on host equipment to provide adequate power and environment for optimum performance and compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temper- ature regulation.
Summary of the content on the page No. 10
3.1.2 Electromagnetic compliance Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys- tem represents the most popular characteristics for test platforms. The system configurations include: • Typical current use microprocessor • Keyboard • Monitor/display • Printer •Mouse Although the test system with this Seagate model complies with
Summary of the content on the page No. 11
3.2.1 China Restriction of Hazardous Substances (RoHS) Directive This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table contains information mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic Information Products" Standard. "O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the threshold defined by the China RoHS MCV Standard. "X" indicates the hazard
Summary of the content on the page No. 12
4.0 General description Savvio 10K.5 FC drives provide high performance, high capacity data storage for a variety of systems including engineering workstations, network servers, mainframes, and supercomputers. Savvio 10K.5 FC drives support 4-Gb Fibre Channel which can transfer data at up to 800MBs per second and 1600MBs per second in dual- loop configurations. Savvio 10K.5 FC drives support the Fibre Channel Arbitrated Loop (FC-AL) and SCSI Fibre Channel Protocol as described in the ANSI spe
Summary of the content on the page No. 13
4.1 Standard features Savvio 10K.5 FC drives have the following standard features: • Perpendicular recording technology • 4-Gb Fibre Channel interface • Integrated dual port FC-AL controller • Concurrent dual port transfers • Support for FC arbitrated loop, private and public attachment • Differential copper FC drivers and receivers • Downloadable firmware using the FC-AL interface • Supports SCSI enclosure services via interface connector • 128-deep task set (queue) • Supports up to 32 initiato
Summary of the content on the page No. 14
4.3 Performance • Programmable multi-segmentable cache buffer • 800MB/s maximum instantaneous data transfers per port • 10K RPM spindle. Average latency = 2.98ms • Command queuing of up to 128 commands • Background processing of queue • Supports start and stop commands (spindle stops spinning) • Adaptive seek velocity; improved seek performance 4.4 Reliability • Annualized Failure Rate (AFR) of 0.44% • Mean Time Between Failures (MTBF) of 2,000,000 hours • Self-Monitoring Analysis and Reporting
Summary of the content on the page No. 15
4.6 Programmable drive capacity Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select Parameter List table in the SCSI Commands Reference Manual. Refer to the Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive shall not change the capacity it is currently formatted to have. A number in the number of blocks field that is less than the maximum number of LBA
Summary of the content on the page No. 16
5.0 Performance characteristics This section provides detailed information concerning performance-related characteristics and features of Sav- vio 10K.5 FC drives. 5.1 Internal drive characteristics ST9900805FC ST9600205FC ST9450405FC ST9300605FC Drive capacity* 900 600 450 300 GBs (formatted, rounded off value) Read/write data heads 6 4 3 2 Tracks per inch 300,000 300,000 300,000 300,000 TPI Peak bits per inch 1686 1686 1686 1686 kBPI Areal density 506 506 506 506 Gb/in2 Internal data rate 1.
Summary of the content on the page No. 17
5.2.2 Format command execution time (minutes) ST9900805FC ST9600205FC ST9450405FC ST9300605FC Maximum (with verify) 234 156 117 78 Maximum (without verify) 116 75 58 36 5.2.3 General performance characteristics Sustainable disk transfer rate*: Data buffer to/from disc media (one 512-byte logical block)* 1.00 to 1.91 Gb/s Sustained transfer rate 89 to 160 Mib/s ** 93 to 168 MB/s Fibre Channel Interface maximum instantaneous transfer rate 800MB/s* per port (dual port = 1600MB/s*) Logical blo
Summary of the content on the page No. 18
5.5 Cache operation Note. Refer to the Fibre Channel Interface Manual for more detail concerning the cache bits. Of the 64 Mbytes physical buffer space in the drive, approximately 30,000 kbytes are available as a data cache. The remaining buffer space is reserved for internal drive use. The drive keeps track of the logical block addresses of the data stored in each segment of the buffer. If the cache is enabled (see RCD bit in the FC Interface Manual ), data requested by the host with a read c
Summary of the content on the page No. 19
5.5.1 Caching write data Write caching is a write operation by the drive that makes use of a drive buffer storage area where the data to be written to the medium is stored while the drive performs the Write command. If read caching is enabled (RCD=0), then data written to the medium is retained in the cache to be made avail- able for future read cache hits. The same buffer space and segmentation is used as set up for read functions. The buffer segmentation scheme is set up or changed indepen
Summary of the content on the page No. 20
6.0 Reliability specifications The following reliability specifications assume correct host and drive operational interface, including all inter- face timings, power supply voltages, environmental requirements and drive mounting constraints. 8 Seek error rate: Less than 10 errors in 10 seeks 1 Read Error Rates 12 Recovered Data Less than 10 sectors in 10 bits transferred (OEM default settings) 16 Unrecovered Data Less than 1 sector in 10 bits transferred 21 Miscorrected Data Less than 1 sector
