Summary of the content on the page No. 1
Product Manual
Video 3.5 HDD
ST31000424CS ST31000322CS
ST3500414CS ST3500312CS
ST3320413CS ST3320311CS
ST3250412CS ST3250312CS
ST3160316CS
100529372
Rev. J
May 2013
Summary of the content on the page No. 2
Revision history Revision Date Sheets affected or comments Rev. A 01/07/09 Initial release as Pipeline HD.2. Rev. B 04/29/09 1, 6, 17, 22, 24, 32 and 34. Rev. C 05/19/09 fc, 1, 3, 8, 10-11, 19 and 32. Rev. D 07/08/09 1, 5, 7, 9, 25 and 27-28. Rev. E 10/29/09 Updated weight information in Tables 1-3 and physical specifications. Fixed Write DMA FUA Extended command. Minor text and formatting changes throughout. Rev. F 01/05/10 Corrected 320GB model number. Updated DC power requirements (Table 4).
Summary of the content on the page No. 3
Pipeline HD.2 Series SATA Product Manual, Rev. J i
Summary of the content on the page No. 4
ii Pipeline HD.2 Series SATA Product Manual, Rev. J
Summary of the content on the page No. 5
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary tables . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
iv Pipeline HD.2 Series SATA Product Manual, Rev. J
Summary of the content on the page No. 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Seagate Video 3.5 (formerly Pipeline HD.2) model drive: ST31000424CS ST3500414CS ST3320413CS ST3250412CS ST31000322CS ST3500312CS ST3320311CS ST3250312CS ST3160316CS These drives provide the following key features: • High instantaneous (burst) data-transfer rates 3Gb/s default. Limit settings to 1.5Gb/s available via SMART Command Transport command. • Perpendicular recordi
Summary of the content on the page No. 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the transition f
Summary of the content on the page No. 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive model: ST31000424CS ST3500414CS ST3320413CS ST3250412CS ST31000322CS ST3500312CS ST3320311CS ST3250312CS ST3160316CS 2.1 Specification summary tables The specifications listed in the following tables are for quick reference. For details on spec
Summary of the content on the page No. 10
Table 1: Drive specifications summary for 1000GB models Drive specification ST31000424CS ST31000322CS Formatted Capacity 1000GB (512 bytes/sector)* Guaranteed sectors 1,953,525,168 Heads 4 Disks 2 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density (max.) 1417kb/in Track density (avg.) 236 ktracks/in 2 Areal density (avg.) 341.5Gb/in Spindle speed 5900 RPM Internal data transfer rate (max.) 1285Mb/s Sustained data transfer rat
Summary of the content on the page No. 11
Drive specification ST31000424CS ST31000322CS Operational Shock (max.) 70 Gs at 2ms (read) 30 Gs at 2ms (write) Non-Operational Shock (max.) 350 Gs at 2ms Vibration, operating 5Hz to 22Hz: 0.25 Gs 22Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs Vibration, non-operating 5Hz to350Hz: 3.0 Gs 350Hz to 500Hz: 3.0 Gs Drive acoustics, sound power Idle** 2.1 bels (typical) 2.3 bels (max.) CE Seek Profile 2.4 bels (typical) 2.5 bels (max.) 15 Nonrecoverable read errors 1 per 10 bits read A
Summary of the content on the page No. 12
Table 2: Drive specifications summary for 500 and 320GB models Drive specification ST3500414CS ST3500312CS ST3320413CS ST3320311CS Formatted capacity 500GB 320GB (512 bytes/sector)* Guaranteed sectors 976,773,168 625,142,448 Heads 2 Disks 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density (max.) 1417kb/in Track density (avg) 236 ktracks/in 2 Areal density(avg) 341.5Gb/in Spindle speed 5900 RPM Internal data transfer rate
Summary of the content on the page No. 13
Drive specification ST3500414CS ST3500312CS ST3320413CS ST3320311CS Operational Shock (max.) 70 Gs at 2ms Non-Operational Shock (max.) 350 Gs at 2ms Vibration, operating 5Hz to 22Hz: 0.25 Gs 22Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs Vibration, non-operating 5Hz to 350 Hz: 3.0 Gs 350Hz to 500Hz: 3.0 Gs Drive acoustics, sound power Idle** 1.9 bels (typical) 2.1 bels (max.) CE Seek Profile 2.3 bels (typical) 2.4 bels (max.) 15 Nonrecoverable read errors 1 per 10 bits read Annua
Summary of the content on the page No. 14
Table 3: Drive specifications summary for 250 and 160GB models Drive specification ST3250412CS ST3250312CS ST3160316CS Formatted capacity 250GB 160GB (512 bytes/sector)* Guaranteed sectors 488,397,168 312,581,808 Heads 1 Disks 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density (max.) 1417kb/in Track density (avg.) 236 ktracks/in 2 Areal density (avg.) 341.5Gb/in Spindle speed 5900 RPM Internal data transfer rate (max.) 1
Summary of the content on the page No. 15
Drive specification ST3250412CS ST3250312CS ST3160316CS Operational Shock (max.) 70 Gs at 2ms (read) 30 Gs at 2ms (write) Non-Operational Shock (max.) 350 Gs at 2ms Vibration, operating 5Hz to 22Hz: 0.25 Gs 22Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs Vibration, non-operating 5Hz to 350Hz: 3.0 Gs 350Hz to 500Hz: 3.0 Gs Drive acoustics, sound power Idle** 1.9 bels (typical) 2.1 bels (max.) CE Seek Profile 2.3 bels (typical) 2.4 bels (max.) 15 Nonrecoverable read errors 1 per 10
Summary of the content on the page No. 16
2.2 Formatted capacity Formatted Guaranteed Model capacity* sectors Bytes per sector ST31000424CS 1000GB 1,953,525,168 ST31000322CS ST3500414CS 500GB 976,773,168 ST3500312CS ST3320413CS 320GB 625,142,448 512 ST3320311CS ST3250412CS 250GB 488,397,168 ST3250312CS ST3160316CS 160GB 312,581,808 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing the driv
Summary of the content on the page No. 17
2.5 Physical characteristics 1000GB model 500, 320, 250 and 160GB models Maximum height 26.1mm / 1.028 in 20.20mm / 0.794 in Maximum width 101.85mm / 4.010 in Maximum length 146.99mm / 5.787 in Typical weight 615g / 1.356 lb 500 and 320GB models 420g / 0.926 lb 250 and 160GB models 395g / 0.871 lb Cache buffer ST31000424CS, ST3500414CS, ST3320413CS and 16MB (16,384KB) ST3250412CS ST31000322CS, ST3500312CS, ST3320311CS, 8MB (8,192KB) ST3250312CS and ST3160316CS 2.6 Seek time Seek measurement
Summary of the content on the page No. 18
2.8 Power specifications The drive receives DC power (5V or 12V) through a native SATA power connector. Refer to Figure 2 on page 22. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5V and 12V input voltage at 25°C ambient tem- perature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches opera
Summary of the content on the page No. 19
2.8.1.1 Typical current profiles Figure 1. Typical 12V startup and operation current profile 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the 12V line or an equivalent 15-ohm resistive load on the 5V line. • Using 12V power, the drive is expected to operate with a maximum of 120mV peak-to-peak square-wave injected noise at up to 10MHz. • Using 5V power, the drive is expected to operate with a maximum of 100m
Summary of the content on the page No. 20
2.8.4 Power management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes: Power modes Heads Spindle Buffer Active Tracking Rotating Enabled Idle Tracking Rotating Enabled Standby Parked Stopped Enabled Sleep Parked Stopped Disabled • Active mode The drive is in Active mode during the read/write and seek operation
