Summary of the content on the page No. 1
Intel® Solid-State Drive 530 Series (2.5-inch)
®
Intel Solid-State Drive 530 Series
(2.5-inch)
Product Specification
Capacities: 80 GB, 120 GB, 180 GB, 240 GB, Power Management
360 GB, 480 GB
− 5.0 V SATA Supply Rail
Components:
− SATA Link Power Management (LPM)
®
− Intel 20 nm NAND Flash Memory − Device Sleep (DevSleep)
− Multi-Level Cell (MLC)
Power
Form Factors: 2.5-inch − Active (BAPCo MobileMark* 2007
Workload): 195 mW
Thickness: 7 mm
3
− Idle : 125
Summary of the content on the page No. 2
Intel® Solid-State Drive 530 Series (2.5-inch) Ordering Information Contact your local Intel sales representative for ordering information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND IN
Summary of the content on the page No. 3
Intel® Solid-State Drive 530 Series (2.5-inch) Contents Revision History .................................................................................................................... 4 1 Introduction ............................................................................................................... 5 1.1 Terminology ................................................................................................................. 6 1.2 Reference Documents ..............
Summary of the content on the page No. 4
Intel® Solid-State Drive 530 Series (2.5-inch) Revision History Document Revision Description Revision Date Number Number 329212 001US Initial release July 2013 329212 002US Added 120 GB capacity September 2013 329212 003US Added 80 GB, 360 GB, and 480 GB capacities October 2013 Product Specification October 2013 4 Order Number: 329212-003US
Summary of the content on the page No. 5
Intel® Solid-State Drive 530 Series (2.5-inch) 1 Introduction This document describes the specifications and capabilities of the Intel® Solid-State Drive 530 Series (Intel® SSD 530 Series). The Intel SSD 530 Series delivers the next generation storage solution with new low power features designed for Ultrabook™. The next generation Intel SSD continues to provide high performance expected for Serial Advanced Technology Attachment (SATA)-based computers. The industry-standard 2.5-inch
Summary of the content on the page No. 6
Intel® Solid-State Drive 530 Series (2.5-inch) 1.1 Terminology Table 1: Terminology Term Description ATA Advanced Technology Attachment DAS Device Activity Signal DevSleep Device Sleep, a new addition to the SATA specification DIPM Device Initiated Power Management DMA Direct Memory Access EXT Extended FPDMA First Party Direct Memory Access Gigabyte (1,000,000,000 bytes) Note: The total usable capacity of the SSD may be less than the total physical GB capacity because a sma
Summary of the content on the page No. 7
Intel® Solid-State Drive 530 Series (2.5-inch) 1.2 Reference Documents Table 2: Standard References Date or Rev. # Title Location May 2005 SFF-8201, 2.5-inch drive form factor http://www.sffcommittee.org/ May 2006 SFF-8223, 2.5-inch Drive w/Serial Attachment http://www.sffcommittee.org/ Connector IEC 55022 Information Technology Equipment — Radio disturbance Characteristics— Limits and Sept 2008 http://www.iec.ch/ methods of measurement CISPR22:2008 (Modified) Dec 2008 VCCI http
Summary of the content on the page No. 8
Intel® Solid-State Drive 530 Series (2.5-inch) 2 Product Specifications 2.1 Capacity Table 3: User Addressable Sectors Capacity Unformatted Capacity (Total User Addressable Sectors in LBA mode) 80 GB 156,301,488 120 GB 234,441,648 180 GB 351,651,888 240 GB 468,862,128 360 GB 703,282,608 480 GB 937,703,088 2.2 Performance Table 4: Compressible Performance Specification Random Random Random Sequential Sequential 4 KB Read 4 KB Write 4 KB Write 1 1 128 KB Read 128 KB Write
Summary of the content on the page No. 9
Intel® Solid-State Drive 530 Series (2.5-inch) Table 6: Latency Specification Intel® SSD 530 Series 80 GB 120 GB 180 GB 240 GB 360 GB 480 GB 1 Read 80 µs (TYP) 1 Write 85 µs (TYP) 2 Power On To Ready 1 s (TYP) Note: 1. Based on sequential 4 KB using Iometer with Queue Depth 1 workload with compressible (non-random) data pattern. Write Cache enabled. 2. Power On To Ready time assumes proper shutdown 2.3 Electrical Characteristics Table 7: Operating Voltage and Power Consumptio
Summary of the content on the page No. 10
Intel® Solid-State Drive 530 Series (2.5-inch) 2.4 Environmental Conditions 2.4.1 Temperature, Shock, Vibration Table 8: Temperature, Shock, Vibration Electrical Characteristics Range Case Temperature 1 Operating 0º C - 70º C 2 Non-operating -55º C - 95º C 3 Temperature Gradient Operating 30 (TYP) ºC/hr Non-operating 30 (TYP) ºC/hr Humidity Operating 5 – 95 % Non-operating 5 – 95 % Shock and Vibration Range 4 Shock Operating 1,500 G (Max) at 0.5 msec Non-op
Summary of the content on the page No. 11
Intel® Solid-State Drive 530 Series (2.5-inch) 2.5 Product Regulatory Compliance The Intel® SSD 530 Series meets or exceeds the regulatory or certification requirements in the table below. Table 9: Product Regulatory Compliance Specifications Title Description Region For Which Conformity Declared TITLE 47-Telecommunications CHAPTER FCC Part 15B Class B 1— FEDERAL COMMUNMICATIONS USA COMMISSION PART 15 — RADIO FREQUENCY DEVICES CA/CSA-CEI/IEC CISPR 22-10 (Ref. ICES-003, Iss
Summary of the content on the page No. 12
Intel® Solid-State Drive 530 Series (2.5-inch) 2.6 Reliability The Intel® SSD 530 Series meets or exceeds SSD endurance and data retention requirements as specified in the JESD218 specification. Table 10: Reliability Specifications Parameter Value Uncorrectable Bit Error Rate (UBER) Uncorrectable bit error rate will not exceed one sector in the specified 16 < 1 sector per 10 bits read number of bits read. In the unlikely event of a non-recoverable read error, the SSD will repor
Summary of the content on the page No. 13
Intel® Solid-State Drive 530 Series (2.5-inch) 3 Mechanical Information The figure below shows the mechanical information for the full size 2.5 inch Intel® SSD 530 Series SSD. All dimensions are in millimeters. Figure 1: Dimensions for Full Size 2.5 inch Drives October 2013 Product Specification Order Number: 329212-003US 13
Summary of the content on the page No. 14
Intel® Solid-State Drive 530 Series (2.5-inch) 4 Pin and Signal Descriptions 4.1 Pin Locations Figure 2: Layout of Signal and Power Segment Pins Note: 2.5-inch connector supports in-built latching capability. 4.2 Signal Descriptions 4.2.1 Connector Pin Signal Definitions Table 11: Serial ATA Connector Pin Signal Definitions Pin Function Definition S1 Ground 1st mate S2 A+ Differential signal pair A S3 A- S4 Ground 1st mate S5 B- Differential signal pair B S6 B+ S7 Gro
Summary of the content on the page No. 15
Intel® Solid-State Drive 530 Series (2.5-inch) 4.2.2 Power Pin Signal Definitions Table 12: Serial ATA Power Pin Definitions 1 Pin Name Definition Mating Order 2 P1 2nd Mate V 3.3 V Power; not used 33 2 P2 2nd Mate V 3.3 V Power; not used 33 2 P3 1st Mate DevSleep Device Sleep Pin 3,4 P4 1st Mate Ground 3 P5 1st Mate Ground 3 P6 1st Mate Ground 3,5 P7 1st Mate V 5 V Power 5 3,5 P8 2nd Mate V 5 V Power 5 3,5 P9 2nd Mate V 5 V Power 5 3 P10 1st Mate Ground 6 P11 2n
Summary of the content on the page No. 16
Intel® Solid-State Drive 530 Series (2.5-inch) 5 Supported Command Sets The Intel SSD 530 Series supports all mandatory Advanced Technology Attachment (ATA) and Serial ATA (SATA) commands defined in the ACS-2 and SATA Revision 3.0 specifications. The mandatory and optional commands are defined in this section. 5.1 ATA General Feature Command Set General Feature command set (non-PACKET), which consists of: − EXECUTE DEVICE DIAGNOSTIC − FLUSH CACHE 1 − IDENTIFY DEVICE − READ DMA
Summary of the content on the page No. 17
Intel® Solid-State Drive 530 Series (2.5-inch) 5.2 Power Management The Intel SSD 530 Series supports several power management feature sets as defined by the ATA specification: general Power Management feature set, Advanced Power Management feature set, and Power-Up in Standby (PUIS) feature set. The Advanced Power Management and PUIS features can be enabled or disabled using the SET FEATURES command. The Power Management feature set includes the following commands: • CHECK POWER MO
Summary of the content on the page No. 18
Intel® Solid-State Drive 530 Series (2.5-inch) 5.4 SMART Command Set The Intel SSD 530 Series supports the SMART command set, which consists of: • SMART READ DATA • SMART READ ATTRIBUTE THRESHOLDS • SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE • SMART SAVE ATTRIBUTE VALUES • SMART EXECUTE OFF-LINE IMMEDIATE • SMART READ LOG SECTOR • SMART WRITE LOG SECTOR • SMART ENABLE OPERATIONS • SMART DISABLE OPERATIONS • SMART RETURN STATUS 5.4.1 SMART Attributes Table 13 lists the SMART at
Summary of the content on the page No. 19
Intel® Solid-State Drive 530 Series (2.5-inch) ID Attribute Status Flags Threshold SP EC ER PE OC PW AAh 1 1 0 0 1 1 10 Available Reserved Space Program Fail Count The raw value of this attribute shows total ABh 1 1 0 0 1 0 0 (none) count of program fails and the normalized value, beginning at 100, shows the percent remaining of allowable program fails. Erase Fail Count The raw value of this attribute shows total ACh 1 1 0 0 1 0 0 (none) count of erase fails and the norma
Summary of the content on the page No. 20
Intel® Solid-State Drive 530 Series (2.5-inch) ID Attribute Status Flags Threshold SP EC ER PE OC PW Host Writes The raw value of this attribute reports the total E1h number of sectors written by the host system. 1 1 0 0 1 0 0 (none) The raw value is increased by 1 for every 65,536 sectors (32 MB) written by the host. Timed Workload Media Wear Measures the wear seen by the SSD (since reset E2h 1 1 0 0 1 0 0 (none) of the workload timer, attribute E4h), as a percentage of the
