Summary of the content on the page No. 1
Intel® Solid-State Drive 530 Series (M.2)
®
Intel Solid-State Drive 530 Series (M.2)
Product Specification
Capacities: 80 GB, 120 GB, 180 GB, 360 GB Power Management
− 3.3 V SATA Supply Rail
Components:
®
− SATA Link Power Management (LPM)
− Intel 20 nm NAND Flash Memory
− Device Sleep (DevSleep)
− Multi-Level Cell (MLC)
Power
Form Factors: M.2 80 mm (single- and double-
sided) − Active (BAPCo MobileMark* 2007
Workload): 140 mW
− 2280-S2-B-M (80 GB and 180 GB)
Summary of the content on the page No. 2
Intel® Solid-State Drive 530 Series (M.2) Ordering Information Contact your local Intel sales representative for ordering information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DI
Summary of the content on the page No. 3
Intel® Solid-State Drive 530 Series (M.2) Contents Revision History .................................................................................................................... 4 1 Introduction ............................................................................................................... 5 1.1 Terminology ................................................................................................................. 6 1.2 Reference Documents ...................
Summary of the content on the page No. 4
Intel® Solid-State Drive 530 Series (M.2) Revision History Document Revision Description Revision Date Number Number 329213 001US Initial release July 2013 329213 002US Added 120GB capacity September 2013 Product Specification September 2013 4 Order Number: 329213-002US
Summary of the content on the page No. 5
Intel® Solid-State Drive 530 Series (M.2) 1 Introduction This document describes the specifications and capabilities of the Intel® Solid-State Drive 530 Series (Intel® SSD 530 Series). The Intel® SSD 530 Series is a case-less, M.2, next generation storage solution designed for Ultrabook™. The new M.2 form factor allows ultra-compact solutions which deliver leading performance for Serial Advanced Technology Attachment (SATA)-based computers in capacities ranging up to 360 GB. The lat
Summary of the content on the page No. 6
Intel® Solid-State Drive 530 Series (M.2) 1.1 Terminology Table 1: Terminology Term Description ATA Advanced Technology Attachment DAS Device Activity Signal DevSleep Device Sleep, a new addition to the SATA specification DIPM Device Initiated Power Management DMA Direct Memory Access EXT Extended FPDMA First Party Direct Memory Access Gigabyte (1,000,000,000 bytes) Note: The total usable capacity of the SSD may be less than the total physical GB capacity because a small po
Summary of the content on the page No. 7
Intel® Solid-State Drive 530 Series (M.2) 1.2 Reference Documents Table 2: Standard References Date or Rev. # Title Location IEC 55022 Information Technology Equipment — Radio disturbance Characteristics— Limits and Sept 2008 http://www.iec.ch/ methods of measurement CISPR22:2008 (Modified) Dec 2008 VCCI http://www.vcci.jp/vcci_e/ http://qdms.intel.com/ June 2009 RoHS Click Search MDDS Database and search for material description datasheet June 2009 Serial ATA Revision 3.0 http
Summary of the content on the page No. 8
Intel® Solid-State Drive 530 Series (M.2) 2 Product Specifications 2.1 Capacity Table 3: User Addressable Sectors Intel® SSD 530 Series Unformatted Capacity (Total User Addressable Sectors in LBA mode) 80 GB 156,301,488 120 GB 234,441,648 180 GB 351,651,888 360 GB 703,282,608 2.2 Performance Table 4: Compressible Performance Specification Unit Intel® SSD 530 Series 80 GB 120 GB 180 GB 360 GB 1 Random 4 KB Read (up to) IOPS 24,000 24,000 41,000 41,000 2 Random 4 KB Write
Summary of the content on the page No. 9
Intel® Solid-State Drive 530 Series (M.2) 1. Performance measured using Iometer* with Queue Depth 32 Table 6: Latency Specification Intel® SSD 530 Series 80 GB 120 GB 180 GB 360 GB 1 Read 80 µs (TYP) 1 Write 85 µs (TYP) 2 Power On To Ready 1 s (TYP) Note: 1. Based on sequential 4 KB using Iometer with Queue Depth 1 workload with compressible (non-random) data pattern. Write Cache enabled. 2. Power On To Ready time assumes proper shutdown 2.3 Electrical Characteristics Table
Summary of the content on the page No. 10
Intel® Solid-State Drive 530 Series (M.2) 2.4 Environmental Conditions 2.4.1 Temperature, Shock, Vibration Table 8: Temperature, Shock, Vibration Electrical Characteristics Range Module Temperature 1 Operating 0º C - 70º C 2 Non-operating -55º C - 95º C 3 Temperature Gradient Operating 30 (TYP) ºC/hr Non-operating 30 (TYP) ºC/hr Humidity Operating 5 – 95 % Non-operating 5 – 95 % Shock and Vibration Range 4 Shock Operating 1,000 G (Max) at 0.5 msec Non-opera
Summary of the content on the page No. 11
Intel® Solid-State Drive 530 Series (M.2) 2.5 Product Regulatory Compliance The Intel® SSD 530 Series meets or exceeds the regulatory or certification requirements in the table below. Table 9: Product Regulatory Compliance Specifications Title Description Region For Which Conformity Declared TITLE 47-Telecommunications CHAPTER FCC Part 15B Class B 1— FEDERAL COMMUNMICATIONS USA COMMISSION PART 15 — RADIO FREQUENCY DEVICES CA/CSA-CEI/IEC CISPR 22-10 (Ref. ICES-003, Issue 4
Summary of the content on the page No. 12
Intel® Solid-State Drive 530 Series (M.2) 2.6 Reliability The Intel® SSD 530 Series meets or exceeds SSD endurance and data retention requirements as specified in the JESD218 specification. Table 10: Reliability Specifications Parameter Value Uncorrectable Bit Error Rate (UBER) Uncorrectable bit error rate will not exceed one sector in the specified 16 < 1 sector per 10 bits read number of bits read. In the unlikely event of a non-recoverable read error, the SSD will report it
Summary of the content on the page No. 13
Intel® Solid-State Drive 530 Series (M.2) 3 Mechanical Information The Intel® SSD 530 Series meets the proposed specification for 80mm M.2 form factor The figure below shows the physical package information for the 80 mm height, M.2 Intel® SSD 530 Series SSD. All dimensions are in millimeters. Figure 1: Dimensions for 80 mm double-sided M.2 Form Factor (2280-D2-B-M) 120 GB and 360 GB September 2013 Product Specification Order Number: 329213-002US 13
Summary of the content on the page No. 14
Intel® Solid-State Drive 530 Series (M.2) Figure 2: Dimensions for 80 mm single-sided M.2 Form Factor (2280-S2-B-M) 80 GB and 180 GB Product Specification September 2013 14 Order Number: 329213-002US
Summary of the content on the page No. 15
Intel® Solid-State Drive 530 Series (M.2) 4 Pin and Signal Descriptions 4.1 Pin Locations Figure 3: Layout of Signal and Power Segment Pins September 2013 Product Specification Order Number: 329213-002US 15
Summary of the content on the page No. 16
Intel® Solid-State Drive 530 Series (M.2) 4.2 Signal Descriptions Table 11: M.2 Serial ATA Power Pin Definitions Pin Function Definition P1 CONFIG_3 Ground P2 +3.3 V 3.3 V Source P3 GND Ground P4 +3.3 V 3.3 V Source P5 Reserved No Connect P6 Reserved No Connect P7 Reserved No Connect P8 Reserved No Connect P9 Reserved No Connect P10 DAS/DSS# Device Activity Signal / Disable Staggered Spin-up P11 Reserved No Connect P12 Notch No Connect P13 Notch No Connect P14 Notch No C
Summary of the content on the page No. 17
Intel® Solid-State Drive 530 Series (M.2) Pin Function Definition P48 Reserved No Connect P49 +A Host Transmitter Differential Signal Pair (This is an input of the SSD) P50 Reserved No Connect P51 GND Ground P52 Reserved No Connect P53 Reserved No Connect P54 Reserved No Connect P55 Reserved No Connect P56 Two Wire Interface Two Wire Interface Clock P57 GND Ground P58 Two Wire Interface Two Wire Interface Data P59 Notch No Connect P60 Notch No Connect P61 Notch No Connect P62
Summary of the content on the page No. 18
Intel® Solid-State Drive 530 Series (M.2) 5 Supported Command Sets The Intel SSD 530 Series supports all mandatory Advanced Technology Attachment (ATA) and Serial ATA (SATA) commands defined in the ACS-2 and SATA Revision 3.0 specifications. The mandatory and optional commands are defined in this section. 5.1 ATA General Feature Command Set General Feature command set (non-PACKET), which consists of: − EXECUTE DEVICE DIAGNOSTIC − FLUSH CACHE 1 − IDENTIFY DEVICE − READ DMA − R
Summary of the content on the page No. 19
Intel® Solid-State Drive 530 Series (M.2) 5.2 Power Management The Intel SSD 530 Series supports several power management feature sets as defined by the ATA specification: general Power Management feature set, Advanced Power Management feature set, and Power-Up in Standby (PUIS) feature set. The Advanced Power Management and PUIS features can be enabled or disabled using the SET FEATURES command. The Power Management feature set includes the following commands: • CHECK POWER MODE •
Summary of the content on the page No. 20
Intel® Solid-State Drive 530 Series (M.2) 5.4 SMART Command Set The Intel SSD 530 Series supports the SMART command set, which consists of: • SMART READ DATA • SMART READ ATTRIBUTE THRESHOLDS • SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE • SMART SAVE ATTRIBUTE VALUES • SMART EXECUTE OFF-LINE IMMEDIATE • SMART READ LOG SECTOR • SMART WRITE LOG SECTOR • SMART ENABLE OPERATIONS • SMART DISABLE OPERATIONS • SMART RETURN STATUS 5.4.1 SMART Attributes Table 12 lists the SMART attribu
