HP (Hewlett-Packard) LP 1000r user manual

Summary of the content on the page No. 1

Product Update: HP Netserver LP 1000r User Guide
IMPORTANT Replace the information provided in the HP Netserver LP 1000r User Guide
with the updated information provided in this Product Update for each
section that is referred.
In Chapter 6, "Installing an Additional Processor," replace the section "Installing a Heatsink" in
the User Guide with the following section:
Installing a Heatsink
Once the processor is installed, the heatsink must be installed on top of the processor. A thermal patch on

Summary of the content on the page No. 2

Product Update: HP Netserver LP 1000r User Guide Hook Latch (hidden) Thumb Latch Step A Tab Tab Processor Socket Figure 6-5. Placing the Heatsink on the Processor Hold Down Hook Latch Tool Latch Figure 6-6. Setting the Latches HP Part Number P1810-90039

Printed in December 2000

Summary of the content on the page No. 3

Product Update: HP Netserver LP 1000r User Guide In Chapter 1, "Controls, Ports and Indicators," add the following Note in the subsection, "Powering Down the Netserver." NOTE The HP Netserver supports a headless boot – that is, the keyboard and mouse do not need to be connected to the Netserver to complete the boot process. In Chapter 3, "Installing Mass Storage Devices," "Introduction" section, in the "Installed Mass Storage Devices" subsection, replace Table 3-1, SCSI Mass Storage Device Types