Summary of the content on the page No. 1
Hi-Speed USB 2.0 Thumb Hub
Add 4 additional Hi-Speed USB 2.0 ports to your notebook
User Manual
F5U218-MOB
Summary of the content on the page No. 2
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . .3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Summary of the content on the page No. 3
INTRODUCTION Congratulations and thank you for purchasing the Belkin Hi-Speed USB 2.0 Thumb Hub (the Hub). The Hub provides four downstream USB ports that are compatible with both USB 1.1 (low- and full-speed) devices, as well as with Hi-Speed USB 2.0 (high-speed) devices. This means that the Hub is backward-compatible with all of your current USB 1.1 devices as well as with the new generation of Hi-Speed USB 2.0 devices. This may include such peripherals as scanners, printers, mass storage de
Summary of the content on the page No. 4
INTRODUCTION Features • Compliant with Universal Serial Bus specification 2.0 (data rate 1.5/12/480Mbps) • Backward-compatible with Universal Serial Bus specification 1.1 (data rate 1.5/12Mbps) • Compatible with Windows® 98 SE, Me, 2000, and XP • Approved by USB Implementers Forum (USB-IF) • Plug-and-Play technology • Hot-swappable with USB devices • Over-current detection and protection • Four 480Mbps downstream ports • Fully compatible with USB 1.1 and USB 2.0 devices • Operates wi
Summary of the content on the page No. 5
INTRODUCTION Technical Specifications Upstream Ports 1 Downstream Ports 4 Per-Port Voltage DC +5V Per-Port Current 500mA (max) (Self-Powered mode) 100mA (max) (Bus-Powered mode) Power Mode Self-Powered/Bus-Powered Operating Temperature 5º C ~ 40º C Storage Temperature -2º C ~ 60º C Enclosure Plastic Power Supply Output: DC 5V 2.1A Plug Size: 3.5mm (outer) 1.0mm (center) 10mm (length) Plug Polarity: Center Positive Main Power LED Color Definitions: Off Not Operational Red Operational 3
Summary of the content on the page No. 6
INSTALLATION 1. Plug the AC adapter into a wall outlet or surge suppressor. Plug the DC connector into the DC power jack found on the side of the Hub (see Fig. 1). A red light on the Hub should come on indicating that the Hub is getting power from the power supply, or from the USB port (if the Hub is being operated without the power supply). Note: The Hub may be used without the power supply when connecting low-power devices such as standard keyboards and mice. 2. Next, connect your Thumb Hub
Summary of the content on the page No. 7
INSTALLATION Important Note: Hi-Speed USB 2.0 hub drivers are included with most USB 2.0 PCI upgrade cards, and are pre-installed along with the PCI card drivers. If you purchased an upgrade card prior to the release of Hi-Speed USB 2.0 hub support, please check with your PCI card vendor for an updated USB 2.0 driver. The Belkin Hi-Speed USB 2.0 driver supports all competitive cards based on the NEC host controller with the exception of Adaptec. The most recent Belkin driver is available at www.
Summary of the content on the page No. 8
INFORMATION FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: F5U218-MOB to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interferenc
Summary of the content on the page No. 9
Belkin Corporation 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Express Business Park • Shipton Way Rushden • NN10 6GL • United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin Components B.V. Starparc Building • Boeing Avenue 333 1119 PH Schiphol-Rijk • The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin, Ltd. 7 Bowen Crescent • West Gosford NSW 2250 • Australia Tel: +61 (0) 2 4372 8600 Fax:
