Tripp Lite B130-101S-WP user manual

Summary of the content on the page No. 1

Owner’s Manual
VGA with RS232 Serial Over
Cat5 Extender Wallplate Kit
Model: B130-101S-WP
Safety Information 2
Package Contents 2
Product Features 2-3
Optional Accessories 3
Specifications 3
Features 4
Installation 5-6
Warranty & Warranty Registration 6
Español 7
Français 13
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Note: Follow these instructions to ensure proper operation and prevent damage
to this device and its connected equipment.
Copyright © 2009 Tripp Lit

Summary of the content on the page No. 2

Safety Information • To reduce the risk of electric shock, do not expose the product to moisture. • Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fire. • Use only recommended accessories to avoid fire, shock or other hazards. • Unplug this product before cleaning. Use a damp cloth for cleaning. Do not use cleaning fluids or aerosols, which could enter the unit and cause damage, fire

Summary of the content on the page No. 3

Product Features • Remotely operates serial devices such as touch-screen monitors or barcode scanners • Provides a connection for optional local monitor • Features built-in Equalization and Gain controls to adjust the video image • Supports video resolutions up to 1920x1440 • No drivers required Optional Accessories • P502-Series Monitor Cables with RGB Coax, HD15 Male/Male • P520-006 DB9 M/F Extension Cable, 6ft. • P524-Series Zero-Skew UTP Bulk Cable • N020-01K-GY Cat5e Bulk Stranded

Summary of the content on the page No. 4

Features HD15 Female Connector. 1 Source Video-In Port: 2 Power LED: This LED illuminates when the external power supply is connected and the unit is receiving power. 3 Local Serial Port: The included 3.5 mm Male to DB9 Female adapter cable plugs into this 3.5 mm Female port. Power Jack: The 5V, 2A external power supply plugs in here. 4 5 110 Punchdown Connector: Connect Cat5/5e/6 cable between the 110 Punchdown Connectors on the local and remote units. HD15 Female Connector. 6 Remote Un

Summary of the content on the page No. 5

Installation 5 4 9 1 2 7 10 3 8 6 11 1 Connect the Male end of the VGA splitter cable to the HD15 port on the source computer. 2 Connect one of the Female ends of the VGA splitter cable to the Local Unit’s HD15 port using a VGA cable. (Optional) Connect a local monitor to the remaining Female connector 3 of the VGA splitter cable using a VGA cable. Connect the included 3.5 mm Male to DB9 Female adapter cable to the 4 3.5 mm Female port on the local unit. 5 Connect the DB9 port on the compu

Summary of the content on the page No. 6

Installation If the video on your monitor is either too dark or too light, use the Gain 14 Adjustment on the remote unit. 15 If the video on your monitor is fuzzy, or shows a ghosting effect, use the EQ Adjustment on the remote unit. Warranty & Warranty Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited