Summary of the content on the page No. 1
08-1280_RF-UCPUCF - ENG.fm Page 1 Wednesday, June 11, 2008 3:43 PM
Universal CPU Cooler
User Guide
RF-UCPUCF
Summary of the content on the page No. 2
08-1280_RF-UCPUCF - ENG.fm Page 2 Wednesday, June 11, 2008 3:43 PM
Summary of the content on the page No. 3
08-1280_RF-UCPUCF - ENG.fm Page 3 Wednesday, June 11, 2008 3:43 PM Rocketfish RF-UCPUCF Universal CPU Cooler Contents Introduction...........................................................3 Features...................................................................4 Installing the CPU cooler...................................6 FAQ......................................................................... 13 Specifications ..................................................... 15 One-year limit
Summary of the content on the page No. 4
08-1280_RF-UCPUCF - ENG.fm Page 4 Wednesday, June 11, 2008 3:43 PM Features • Low-profile design for HTPC (Home Theater Personal Computer) and slim-type chassis • Comprehensive cooling solution that cools the CPU and surrounding components • Universal design for Intel LGA775 and AMD AM2/754/939/940 CPU sockets • High cooling performance using 100% pure copper base, two heatpipes , aluminum fins, and multitiple air inlets • Easy installation design • Super silent at only 18 dBA at 800 R
Summary of the content on the page No. 5
08-1280_RF-UCPUCF - ENG.fm Page 5 Wednesday, June 11, 2008 3:43 PM Thermal grease (1) B Large screws (4) C LGA 775 retention plates (2) D Small screws (4) E Anti-vibration soft pads (4) F Insulating cushions (4) G Nuts (4) H RF-UCPUCF 5
Summary of the content on the page No. 6
08-1280_RF-UCPUCF - ENG.fm Page 6 Wednesday, June 11, 2008 3:43 PM Hexagonal wrench (1) J Metal plate (1) K K8 retention bracket (1) L System requirements • Intel LGA775 processor or AMD AM2/754/939/940 processor Installing the CPU cooler Preparing to install To prepare to install: 1 Select the correct retention plate(s) for your CPU. 2 Mount the retention plate(s) to the CPU cooler. 6
Summary of the content on the page No. 7
08-1280_RF-UCPUCF - ENG.fm Page 7 Wednesday, June 11, 2008 3:43 PM 3 Remove the protective cover from the bottom of the CPU cooler (A). A 4 Apply a thin layer of thermal grease (B) onto the surface of the installed CPU. B RF-UCPUCF 7
Summary of the content on the page No. 8
08-1280_RF-UCPUCF - ENG.fm Page 8 Wednesday, June 11, 2008 3:43 PM Installing the CPU cooler on an Intel LGA775 CPU To install the CPU cooler onto an Intel LGA775 CPU: 1 Install the four large screws (C) counterclockwise into the two LGA775 retention brackets (D). C D 2 Attach the retention brackets to the bottom of the CPU cooler with the small screws (E), with the large screws pointing up, then insert the anti-vibration pads (F) onto the screws. E F 8
Summary of the content on the page No. 9
08-1280_RF-UCPUCF - ENG.fm Page 9 Wednesday, June 11, 2008 3:43 PM 3 Turn the CPU cooler assembly over and place it on the CPU, aligning the screws on the retention brackets with the installation holes in the system board. 4 Hold the CPU cooler in place and turn the system board over. Caution: Exercise extreme caution so that no components are damaged when handling the system board. 5 Attach the insulating cushions (G) onto the mounting screws of the mounting brackets that project thr
Summary of the content on the page No. 10
08-1280_RF-UCPUCF - ENG.fm Page 10 Wednesday, June 11, 2008 3:43 PM 6 Install four nuts (H) onto the four mounting bracket screws, then tighten the nuts with the hexagonal wrench (J). H J 7 Go to “Connecting the fan cable” on page 13. Installing the CPU cooler on an AMD AM2/K8 (socket 745/939/940) CPU To install the CPU cooler onto an AMD AM2/K8 CPU: 1 Slide the metal plate (K) into the slot of the CPU cooler (between the aluminum fins and the fan itself ). 10
Summary of the content on the page No. 11
08-1280_RF-UCPUCF - ENG.fm Page 11 Wednesday, June 11, 2008 3:43 PM 2 Slide the K8 retention bracket (L) into the same slot so that it rests on the metal plate. 3 Align the CPU cooler assembly over the CPU, then gently lower the assembly onto the system board. RF-UCPUCF 11
Summary of the content on the page No. 12
08-1280_RF-UCPUCF - ENG.fm Page 12 Wednesday, June 11, 2008 3:43 PM 4 Secure the CPU cooler assembly to the mounting posts by hooking one end of the mounting bracket (the end without the tightening cam) over the outboard mounting post (the one toward the edge of the system board). 5 Hook the other end of the mounting bracket (the one with the tightening cam) over the inboard mounting post, then press the cam tightener in toward the system board until it locks. 12
Summary of the content on the page No. 13
08-1280_RF-UCPUCF - ENG.fm Page 13 Wednesday, June 11, 2008 3:43 PM Connecting the fan cable To connect the fan cable: • Plug the fan cable into the 3-pin or 4-pin fan connector on the system board. 4-pin fan connector 3-pin fan connector FAQ Q: Can I replace the original cooler with another 92 mm fan for better air flow? A: Yes. Q: What is the air flow output from the cooler? A: 51.08 MCF Q: Can the CPU cooler support AMD black package 5000? A: Yes. RF-UCPUCF 13
Summary of the content on the page No. 14
08-1280_RF-UCPUCF - ENG.fm Page 14 Wednesday, June 11, 2008 3:43 PM Q: What is the “dB” when the cooler is spinning at full speed? A: 35 dB 14
Summary of the content on the page No. 15
08-1280_RF-UCPUCF - ENG.fm Page 15 Wednesday, June 11, 2008 3:43 PM Specifications Socket type •Intel LGA775 •AMD K8, AM2 Heat sink 4.42 × 4.27 × 2.97 inches dimensions (11.23 × 10.84 × 7.54 cm) Heat sink material Copper base/2 heatpipes/aluminum fins Fan dimensions 3.62 × 3.62 × 2.5 inches (L × W × H) (9.2 × 9.2 × 2.5 cm) Fan speed 800~2200 rpm Bearing type Long-life sleeve Fan life 40,000 hours expectancy Fan noise level 18 dBA~35 dBA (dB-A) Connector 4-pin Weight 10.86 ounces (307.81 g) Vo
Summary of the content on the page No. 16
08-1280_RF-UCPUCF - ENG.fm Page 16 Wednesday, June 11, 2008 3:43 PM 16
Summary of the content on the page No. 17
08-1280_RF-UCPUCF - ENG.fm Page 17 Wednesday, June 11, 2008 3:43 PM One-year limited warranty Rocketfish Products (“Rocketfish”) warrants to you, the original purchaser of this new RF-UCPUCF (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for one (1) year from the purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Rocketfish brand products and packaged with this warr
Summary of the content on the page No. 18
08-1280_RF-UCPUCF - ENG.fm Page 18 Wednesday, June 11, 2008 3:43 PM replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Rocketfish and are not returned to you. If service of Products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Rocketfish Product during the Warranty Period. Warranty cove
Summary of the content on the page No. 19
08-1280_RF-UCPUCF - ENG.fm Page 19 Wednesday, June 11, 2008 3:43 PM What does the warranty not cover? This warranty does not cover: • Customer instruction •Installation •Set up adjustments •Cosmetic damage • Damage due to acts of God, such as lightning strikes •Accident •Misuse •Abuse •Negligence •Commercial use • Modification of any part of the Product, including the antenna This warranty also does not cover: • Damage due to incorrect operation or maintenance • Connection to an incorrect
Summary of the content on the page No. 20
08-1280_RF-UCPUCF - ENG.fm Page 20 Wednesday, June 11, 2008 3:43 PM REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. ROCKETFISH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. ROCKETFISH PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND
