Summary of the content on the page No. 1
Century 2000
Low Profile Coffee Brewers
Summary of the content on the page No. 2
CENTURY 2000 COFFEE BREWERS Dimensions (inches) Manual Pourover Group - 120V TOTAL MODEL WARMERS VOLTS AMPS W D H KW C-2001P 1 BOTTOM 120 1.6 15 8.00 17.35 17.25 C-2002P 1 TOP, 1 BOTTOM 120 1.7 15 8.00 17.25 19.00 C-2003P 2 TOP, 1 BOTTOM 120 1.8 15 8.00 17.25 19.00 C-2003PR 2 BOTTOM, 1 RIGHT 120 1.8 15 16.00 17.25 17.25 C-2003PL 2 BOTTOM, 1 LEFT 120 1.8 15 16.00 17.25 17.25 Automatic with Backup Group - 120V C-2001 1 BOTTOM 120 1.6 15 8.00 17.25 17.25 C-2002 1 TOP, 1 BOTTOM 120 1.7 15 8.00 1
Summary of the content on the page No. 3
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Summary of the content on the page No. 6
Summary of the content on the page No. 7
Summary of the content on the page No. 8
1 17 2 16 3 15 4 14 5 13 6 12 7 11 8 10 9 PARTS LIST 1 COVER, POUROVER U588Q 10 TOWER COVER R958A SCREW, TRUSS HEAD SL #8x3/8 BODY WELDMENT ASSEMBLY 2 P489A 11 R960Q 3 NYLON RECEPTACLE #8 M408A 12 HEATER SWITCH SPST L069A 4 LABEL, SWITCH PANEL NF08A 13 TOGGLE SWITCH BRACKET U81OC 5 READY LIGHT - GREEN C072A 14 TOP COVER W/SINGLE WARMER ASSY RS32Q 6 POWER SWITCH - RED L217A 15 GROMMET, 5/8 I.D. M090A WARMER SWITCH, AMBER WARMER DISH & ELEMENT 120V 7 L580A 16 G095A 8 BREW BASKET - BLACK V001A WAR
Summary of the content on the page No. 9
1 20 2 19 18 3 17 4 16 5 15 6 14 7 13 8 9 12 21 11 10 PARTS LIST ITEM DESCRIPTION PART NO 1 TROUGH SUB-ASSY RP97Q 13 HEATER, 120V 1500W G296A 2 SPRAY TUBE ASSY H297Q HEATER, 220V 2400W G298A 3 WASHER P155A HEATER, 240V 3500W G297A 4 WASHER, RED SILICON M197A 14 HEX NUT 1/4-18 x 3/4 K207A 15 SILICON GASKET M498A 5 SPRAY HEAD ADAPTER K107A TANK TOP SPRAY HEAD 16 RQ74A 6 E004A 17 HI-LIMIT RETAINER RR45A 7 BRACKET, COMPONENT RS45A HI-LIMIT TERMINAL BLOCK, 3 POSITION 18 L573A 8 B171A 19 DIRECT MOUNTI
Summary of the content on the page No. 10
15 16 17 18 19 24 25 14 26 27 28 13 29 12 20 21 22 11 23 30 3 10 9 31 8 7 6 5 4 2 1 34 33 32 16 15 PARTS LIST ITEM DESCRIPTION PART NO SPRAY TUBE ASSEMBLY TUBING 1/4" COLD WATER INLET 19 H297Q 1 H328Q 20 WASHER P155A 2 TUBING 1/4", NEEDLE VALVE EXT. H334Q WASHER, RED SILICON NEEDLE VALVE (80242) 3 L006A 21 M197A 4 MT. BKT, WATER INLET VALVE RQ52A SPRAY HEAD ADAPTER 22 K107A HOSE NUT FITTING 5 K491A 23 SPRAY HEAD E004A 6 VALVE, WATER INLET (.75GPM) 120V L588A THERMOSTAT 24 L002A VALVE, WATER INLE
Summary of the content on the page No. 11
5 6 7 8 9 10 11 4 23 22 3 2 12 13 CECILWARE 1 24 14 21 20 19 18 17 16 15 PARTS LIST ITEM DESCRIPTION PART NO 1 SPRAY TUBE ASSEMBLY K642Q 14 SILICONE TUBING 1/2" I.D. x 14" LONG M611A TIMER HOT WATER DISPENSER TUBING 1/4" COLD WATER INLET 2 L592A 15 H328Q 3 THERMOSTAT L532L 16 MT. BKT, WATER INLET VALVE RQ52A 4 THERMOSTAT KNOB M008A 17 HOSE NUT FITTING K491A 5 WATER LEVEL CONTROL L566A VALVE, WATER INLET (.35GPM) 120V L588A 6 WATER LEVEL SENSOR K402Q 18 VALVE, WATER INLET (.35GPM) 220V L594A SILI
Summary of the content on the page No. 12
WARNING: MACHINE WARRANTY IS VOID IF MACHINE IS CONNECTED TO ANY VOLTAGE OTHER THAN 120 VOLTS. (EXPORT UNITS SHOULD BE CONNECTED TO 220 VOLTS) ** INSTALLATION INSTRUCTIONS ** NOTE: A SEPARATE CIRCUIT SHOULD BE SUPPLIED FOR EACH OF THESE BREWERS WITH A 15 AMP CIRCUIT BREAKER OR FUSE. CHECK LOCAL CODES FOR COMPLIANCE IN INSTALLATION. MANUAL POUROVER MODELS Are not equipped with water inlet connections AUTOMATIC WITH POUROVER BACKUP Are equipped with a ¼" f
Summary of the content on the page No. 13
MANUAL POUROVER UNITS THESE INSTRUCTIONS ARE FOR INITIAL PRIMING ONLY AND DO NOT HAVE TO BE REPEATED FOR NORMAL OPERATION. 1. Remove sample filter pack from brew funnel and insert brew funnel back into machine. 2. Place an empty decanter on warmer plate directly under brew funnel. 3. Lift pourover cover and pour 4 decanters of cold water through the top opening at 3 minute intervals. After the third decanter is poured, water will flow through spray head and funnel and fill decanter be
Summary of the content on the page No. 14
1. Wash brew funnel and decanter by hand as needed. Do not use dishwasher, which may cause decanter breakage. 2. For cleaning all metal surfaces, use any reputable stainless steel cleaning compound. Spray head should be checked and cleaned regularly. (At least once a week.) Spray head holes must be kept open. To prevent “LIMING” problems in the water tube, remove spray head and insert spring probe all the way into the tank through the tube. When inserted into tank properly, n
Summary of the content on the page No. 15
CAUTION: DISCONNECT POWER BEFORE ATTEMPTING ANY ELECTRICAL REPAIRS THERMOSTAT ADJUSTMENTS: NOTE: The thermostat is behind the lower front panel. If water temperature is less than 197 degrees F (92 degrees C) slowly turn thermostat knob clockwise until ready light goes out. When temperature of water approaches 197 degrees to 203 degrees F (92 degrees to 95 degrees C) slowly turn thermostat knob counter- clockwise until the green ready light comes on. If water temperature cannot be incre
Summary of the content on the page No. 16
Summary of the content on the page No. 17
Summary of the content on the page No. 18
Summary of the content on the page No. 19
Summary of the content on the page No. 20
