Summary of the content on the page No. 1
663
OWNERS MANUAL
for
SATELLITE
COFFEE BREWER
with
ELECTRO-MECHANICAL
CONTROL
and
EXTERNALLY HEATED
SATELLITE SERVER
MODEL:
9102A
9104A
Includes:
Installation
Operation
Use & Care
Servicing Instructions
Model 9102A Satellite Brewer with 9105SS Satellite
PRINTED IN UNITED STATES OF AMERICA
p/n 76061 Rev. B ECN-12868 M663 050616 cps
Summary of the content on the page No. 2
663 76061 Owners Manual for 9102A Single Satellite Brewer WARRANTY STATEMENT All electrical equipment manufactured by BLOOMFIELD It also does not apply if the serial nameplate has been INDUSTRIES is warranted against defects in materials and removed or unauthorized service personnel perform service. workmanship for a period of one year from the date of original The prices charged by Bloomfield Industries for its products installation or eighteen (18) months from the date of shipm
Summary of the content on the page No. 3
TABLE OF CONTENTS Thank You for purchasing this WARRANTY STATEMENT xi Bloomfield Industries appliance. SPECIFICATIONS 1 Proper installation, professional FEATURES & OPERATING CONTROLS 2 operation and consistent PRECAUTIONS & GENERAL INFORMATION 4 maintenance of this appliance will AGENCY APPROVAL INFORMATION
Summary of the content on the page No. 4
663 76061 Owners Manual for 9102A Single Satellite Brewer FEATURES AND OPERATING CONTROLS Fig 1. SS-1 Satellite Brewing System Features & Operating Controls 2
Summary of the content on the page No. 5
FEATURES AND OPERATING CONTROLS (continued) Brewer Adjustable Legs Allows brewer to be leveled. Also allow clearance for cleaning underneath brewer. Connector Connects to satellite. Allows satellite heater to be energized. Allows brewer to sense that a satellite is in place. Hot Water Faucet Hot water dispensed here. Nameplate Lists manufacturer, model and serial number. Also lists voltage and wattage rating of brewer. Control
Summary of the content on the page No. 6
663 76061 Owners Manual for 9102A Single Satellite Brewer GENERAL INFORMATION AND PRECAUTIONS This appliance is intended for use in commercial establishments WARNING: only. Electric This appliance is intended to brew hot beverage, specifically coffee, Shock hazard for human consumption. No other use is recommended or authorized All servicing requiring by the manufacturer or its agents. access to non-insulated Operators of this appliance must be familiar with the appliance us
Summary of the content on the page No. 7
INSTALLATION INSTRUCTIONS INSTALL LEGS CAUTION: Hazard from The brewer is provided with adjustable legs. Be sure all four legs Unstable Equipment are securely screwed into the base of the brewer. LEVEL THE UNIT Rubber feet must be installed on each leg of the brewer. The adjustable legs allow the brewer to be leveled. Set the brewer Legs must be adjusted so that in its ultimate operating location and check for level with a spirit all four feet rest firmly on the level
Summary of the content on the page No. 8
663 76061 Owners Manual for 9102A Single Satellite Brewer INSTALLATION INSTRUCTIONS (continued) ELECTRICIAN’S INSTALLATION INSTRUCTIONS CAUTION: Electric Shock Refer to Electrical Specifications, page 1. Hazard Brewer requires a dedicated single-phase circuit: Model 9102A 120 Volt AC, 50/60 Hz 1ø 20 Amps Brewer must be properly NEMA 5-15R receptacle grounded to a reliable earth ground to prevent possible Model 9104A 120/240 Volt AC, 50/6
Summary of the content on the page No. 9
OPERATING INSTRUCTIONS Fig. 5 Control Panel BREWING COFFEE Prepare the Brew Basket: Make sure the wire rack is properly installed in the brew chamber. Insert one (1) Bloomfield paper filter into the brew chamber. Make sure the filter is properly supported by the wire rack. Add a measured amount of grounds to the brew basket. Fig. 6 Brew Basket Recommendations (may vary, depending on type of coffee IMPORTANT: and personal taste pref
Summary of the content on the page No. 10
663 76061 Owners Manual for 9102A Single Satellite Brewer OPERATING INSTRUCTIONS (continued) Fig. 7 Water Flow Diagram BREW & BYPASS The time the BREW SOLENOID is open is This brewer is a standard displacement brewer with pour-over option. controlled by the TIMER For 9102A there is no bypass. Water admitted into the hot water tank in response to the by the BREW SOLENOID will displace a like amount of heated water position of the VOLUME through the brew head, brew
Summary of the content on the page No. 11
CLEANING INSTRUCTIONS CLEANING INSTRUCTIONS PROCEDURE: Clean Coffee Brewer CAUTION: Burn Hazard PRECAUTIONS: Turn POWER SWITCH OFF. Allow brewer to cool. Brewing and serving temperatures of coffee are FREQUENCY: Daily extremely hot. TOOLS: Mild Detergent, Clean Soft Cloth or Sponge Hot coffee will cause Bristle Brush serious skin burns. IMPORTANT: 1. Turn POWER SWITCH OFF.
Summary of the content on the page No. 12
663 76061 Owners Manual for 9102A Single Satellite Brewer CLEANING INSTRUCTIONS (continued) CAUTION: PROCEDURE: Clean Satellite Burn Hazard PRECAUTIONS: Drain Satellite before Cleaning Brewing and serving FREQUENCY: Twice Weekly temperatures of coffee are extremely hot. TOOLS: Sight Glass Brush, Sanitizer Hot coffee will cause Soft Clean Cloth, Bucket serious skin burns. 1. Remove and drain satellite.
Summary of the content on the page No. 13
TROUBLESHOOTING SUGGESTIONS SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY Will not heat or brew Brewer not plugged in or circuit Reconnect brewer to electric power (no lights) breaker tripped Reset circuit breaker Main power switch off or Check. Turn main power switch on. damaged Replace if needed Will not brew Brew switch damaged Check. Replace if needed Timer damaged Check. Replace if needed Volume selector switch damaged Check. Replace if needed Brewer fails to heat Tank
Summary of the content on the page No. 14
663 76061 Owners Manual for 9102A Single Satellite Brewer SERVICING INSTRUCTIONS ACCESS PANELS CAUTION: SHOCK HAZARD TOP PANEL is attached with two screws at the rear and a lip at the front. Disconnect brewer from electric TOP REAR PANEL is attached with four screws. power before opening any access panel. BASIN sets in the body. After disconnecting three hoses, it may be lifted out. Note position of any wires or TIMER ACCESS and HI-LIMIT ACCESS PLUGS may be pried
Summary of the content on the page No. 15
SERVICING INSTRUCTIONS (continued) CAUTION: TEMPERATURE ADJUSTMENT SHOCK HAZARD PRECAUTIONS: Disconnect brewer from electric power. Allow brewer to cool. Live electrical circuits are exposed during this procedure. FREQUENCY: As required to adjust delivered volume Use care to avoid uninsulated electrical connectors. TOOLS: Phillips head screwdriver Adjustments to be performed by
Summary of the content on the page No. 16
663 76061 Owners Manual for 9102A Single Satellite Brewer SERVICING INSTRUCTIONS (continued) Adjustments to be performed by BREW TIMER ADJUSTMENT qualified technician only. PRECAUTIONS: None NOTE: FREQUENCY: As required to adjust delivered volume Brewer is pre-adjusted to deliver 1/2, 1 and/or 1-1/2 gallons of TOOLS: Small flathead screwdriver coffee at a water pressure of 50 Satellite or other container to calibrate vo
Summary of the content on the page No. 17
SERVICING INSTRUCTIONS (continued) BYPASS ADJUSTMENT (9104A ONLY) CAUTION: SHOCK HAZARD PRECAUTIONS: Disconnect brewer from electric power. Allow brewer to cool. Disconnect brewer from electric power before opening the top FREQUENCY: As required to adjust for change in delivered panel. volume, or to taste. The brewer is shipped from the TOOLS: Phillips head screwdriver factory pre-set fo
Summary of the content on the page No. 18
663 76061 Owners Manual for 9102A Single Satellite Brewer SERVICING INSTRUCTIONS (continued) CAUTION: PROCEDURE: Delime the Water Tank CHEMICAL BURN PRECAUTIONS: Disconnect brewer from electric power. HAZARD Allow brewer to cool. Deliming chemicals are caustic. Wear appropriate protective FREQUENCY: As required (Brewer slow to heat) gloves and goggles during this procedure. TOOLS: Deliming Solution Never siphon delimi
Summary of the content on the page No. 19
SERVICING INSTRUCTIONS (continued) 10. Reinstall tank lid assembly into hot water tank. Make sure NOTE: Normally, silicone the lid gasket is properly in place, then reinstall the hold- hoses do not need to be down clamp. delimed. Should deliming hoses become necessary, 11. Remove spray disks and gaskets. Rinse both brew heads Bloomfield recommends with clean water. Using a stiff brush, scrub spray disk to remove any li
Summary of the content on the page No. 20
663 76061 Owners Manual for 9102A Single Satellite Brewer EXPLODED VIEW PLUMBING COMPONENTS 18
