Summary of the content on the page No. 1
Operating instructions
Coffee System
CVA 610
UV
To prevent accidents and
machine damage,
read these instructions
before installation or use. M.-Nr. 05 766 570
Summary of the content on the page No. 2
Contents Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the coffee system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 The program mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Choosing a language . . . . . . .
Summary of the content on the page No. 3
Contents Coffee system care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Daily care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Exterior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Electrical safety Please read these instructions care- Before connecting the appliance to fully to prevent accidents and the electrical supply, make sure machine damage. that the voltage and frequency listed on the data plate correspond with the This appliance is for household use househ
Summary of the content on the page No. 5
IMPORTANT SAFETY INSTRUCTIONS Never open the housing of the Installation appliance. If electrical or mech- Installation work and repairs should anical components or electrical only be performed by a trained connections are disturbed, an electric technician to ensure safety. Repairs shock could be caused damaging the and other work by unauthorized machine. persons could be dangerous. Before service or maintenance, This equipment has not been disconnect the power supply by designed for maritime us
Summary of the content on the page No. 6
IMPORTANT SAFETY INSTRUCTIONS Use The use of accessory attachments not recommended by the The coffee system must be cleaned appliance manufacturer may result in daily to prevent the growth of harm- fire, electric shock or injury to persons. ful bacteria and mold. Please read In areas subject to infestation by the "Coffee system care" section of cockroaches or other vermin, keep this booklet. the appliance and its surroundings clean at all times. Any damage caused by pests will not be covered und
Summary of the content on the page No. 7
Guide to the coffee system a Hot water dispenser b Coffee dispensers (height-adjustable) c Handle to open appliance front d Steam selector e Steam nozzle with milk frother f Drip catch g Program selector h Message window i Coffee serving buttons j Rinse/ pre-warm button k Hot water button 7
Summary of the content on the page No. 8
Guide to the coffee system l Coffee bean container m Slide control to select fineness of ground coffee n Slide control to select quantity of ground coffee o Water tank p Waste unit q Brew unit 8
Summary of the content on the page No. 9
Programming The program mode The coffee system can be customized to each household through the "program mode." To program the appliance: If a setting is accidentally changed, turn the program selector to "0ff". The changed setting will not be saved and the original setting will be retained. ^ Turn the program selector to "Program mode". The appliance is now in program mode and will respond according to the symbols shown under the coffee serving buttons. ^ By pressing the- ore button – a programm
Summary of the content on the page No. 10
Programming Choosing a language The language for the commands in the message window should be selected before the machine is used. ^ Press thee button until the desired The following languages are available: language appears (deutsch, German, Dutch, Portuguese, Spanish, nederlands, portugues, espanol, English, Italian, French. english, italiano or francais.) ^ Press ENTER to save this setting, or turn the program selector to "0ff" to cancel if a mistake has been made. All text in the message win
Summary of the content on the page No. 11
Programming Rinsing feature The rinsing feature flushes out coffee residue and pre-warms the coffee system. When "Rinsing - On" is selected ^ Press buttone, to turn the "Rinsing" the system will automatically be flushed feature on or off. and pre-warmed when the appliance is turned on. If this feature is set to "Rinsing - Off" the system will only be flushed and pre-warmed when the rinse/pre-warm button is pressed. ^ Press ENTER to save this setting, or turn the program selector to "0" to cancel
Summary of the content on the page No. 12
Programming Determining the water If the water hardness is greater than hardness 40 gr/gal (700 ppm), the water must The hardness of the water (tap or bot- be mixed in equal parts with tled) used in the coffee system must be non-carbonated mineral water to determined and programmed into the prevent excessive scale build-up. appliance. The water hardness will Never use distilled water. determine how frequently the unit must be descaled to maintain the coffee Use programming option "Water hard- sy
Summary of the content on the page No. 13
Programming Setting the water hardness ^ Press ENTER to save this setting, or turn the program selector to "0ff" to cancel if a mistake has been made. ^ Turn the program selector counter- clockwise to "Program mode". ^ Press thee button to highlight "WATER HARDN." with an asterisk. ^ Press ENTER to select this program- ming option. The sub-menu will appear in the message window. ^ Press thee button to set the water hardness level (hardness 1 - 4). 13
Summary of the content on the page No. 14
Programming Setting the drink temperatures Depending on the programming option selected, the sub-menu is shown in the The appliance can be set at different message window as follows: temperatures to suit varying coffee drinking preferences. Five temperature levels are available for each drink option. ^ Press thee button to set the temp- erature to minimum, low, medium, high or maximum. ^ Turn the program selector counter- clockwise to "Program mode". ^ Press ENTER to save this setting, or turn t
Summary of the content on the page No. 15
Programming Pre-brewing feature When the pre-brewing feature is on, the freshly ground coffee is moistened with a little hot water to allow the aroma and The sub-menu will appear in the crema of the coffee to fully develop. message window. When the pre-brewing feature is off, the hot water is forced through the coffee immediately. ^ Press thee button to set the pre-brewing process on, off or to "long" (an extra long pre-brew). ^ Turn the program selector counter- ^ Press ENTER to save this setti
Summary of the content on the page No. 16
Programming Pre-grinding feature The pre-grinding feature allows a new portion of beans to be ground after each coffee is dispensed, so there is ^ Press thee button to turn the always ground coffee ready. This saves pre-grinding feature on or off. time if coffee is dispensed frequently. To preserve aroma, the pre-grinding feature should be turned off when only preparing coffee occasionally. ^ Press ENTER to save this setting, or turn the program selector to "0ff" to cancel if a mistake has been
Summary of the content on the page No. 17
Programming Hot water feature When the feature "Programmed hot water" is turned on, the machine will dispense a precise, pre-programmed ^ Press thee button to set the feature quantity of hot water when the hot water on or off. buttond is pressed. When the feature is turned off, the machine will dispense hot water until the hot water buttond is pressed again. ^ Press ENTER to save this setting, or turn the program selector to "0ff" to cancel if a mistake has been made. ^ Turn the program selector
Summary of the content on the page No. 18
Programming Total coffee counter The feature "Total coffee" will display the number of cups of coffee (espresso, coffee, long coffee) that have been ^ Press ENTER to return to the main dispensed to date. menu. ^ Turn the program selector counter- clockwise to "Program mode". ^ Press thee button to highlight "TOTAL COFFEE" with an asterisk. ^ Press ENTER to select this option. The number of coffees that have been dispensed will be displayed in the message window. 18
Summary of the content on the page No. 19
Programming Setting the standby timer For energy efficiency the coffee system can be set to power down after a programmed time interval. ^ Press thee or- button to select the The time is measured from the last time required length of time (e counts coffee / water was dispensed. down,- counts up). The time can be If the time is set at 0:00, the machine set in 15 minute periods. will not switch to standby. ^ Press ENTER to save this setting, or turn the program selector to "0ff" to cancel if a mis
Summary of the content on the page No. 20
System lock The coffee system can be locked so Deactivating the system lock that it can not be used by children or those not familiar with the operating instructions. Activating the system lock ^ Turn the program selector counter- clockwise to the "Lock" position. The following will appear in the message window: ^ Turn the program selector counter- clockwise to the "Lock" position. The following will appear in the message window: ^ Press and hold the- button. The following appears in the message
