Summary of the content on the page No. 1
HEAVY DUTY MULTI RACK (HDMR)
WARNING:
Read and follow all directions for each step to insure proper assembly of this product.
CLASS SB (Studio): Professional and / or commercial use (Commercial Use Only)
PART #7671101 B-1
DATE: 2/08
Summary of the content on the page No. 2
HAMMER STRENGTH HEAVY DUTY RACKS SAFETY & WARRANTY Purchasers of Hammer Strength products should read the Owner's Manual and all of the warning labels on the products before using them. Because these products may be used in commercial settings, it is the purchaser's responsibility to instruct all individuals, whether users, trainers or observers, on the proper usage of the equipment. Contact Hammer Strength if you do not know how to use this equipment. Hammer Strength recommends that all commer
Summary of the content on the page No. 3
WARNING SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. YOU MUST FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Before using, read all the warnings and obtain instruction on the use of this machine. Use only for intended exercise. DO NOT modify the equipment. 2. Obtain a medical exam before beginning any exercise program. 3. Keep body and clothing free of all moving objects. 4. Inspect equipment daily. Tighten all loose connections, and replace worn parts immediately. DO NOT use if it appears damaged.
Summary of the content on the page No. 4
LIMITED WARRANTY WHAT IS COVERED This Hammer Strength commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the original purchaser for the specific items and duration listed: 10 years on structural frame 1 year on grips 1 year for rust or corrosion of structural frame. Scratches or scrapes where the subsurface of the unit has been exposed must have been properly repaired by the customer. 90 days on upholstery and a
Summary of the content on the page No. 5
LIMITED WARRANTY EXCLUSIVE WARRANTY THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART. We neither assume nor authorize any person to assume for us any other obligation or liability concerning the sale of this Product. Under no circumstances shall we be liable under this warranty, or otherw
Summary of the content on the page No. 6
COMPONENTS LIST * ITEM NO. QTY. PART NO. DESCRIPTION 1 1 HDMR8-CFUPL-0 FRONT LEFT UPRIGHT 2 1 HDMR8-LSFL-0 LOWER LEFT BASE 3 42 HHB.5X4.5 1/2 X 4-1/2” BOLT 4 54 H-BACK-WASH BACKING DOME WASHER 5 44 WASH.5STAR 1/2" INTERNAL LOCK WASHER 6 44 NUT.5LOCK 1/2" THICK LOCK NUT 7 1 HDMR8-CFUPR-0 FRONT RIGHT UPRIGHT 8 1 HDMR8-LSFR-0 LOWER RIGHT BASE 9 1 HDMR8-RX-0 REAR CROSS BRACE 10 1 HDMR8-CPU-0 PULL-UP SUPPORT 11 1 HDMR8-CSUPL-0 SHORT LEFT UPRIGHT 12 1 HDMR8-CSUPR-0 SHORT RIGHT UPRIGHT 13 2 HDMR8-FX-0
Summary of the content on the page No. 7
HARDWARE: 20 ½ X 3-1/2” Bolt 3 ½ X 4-1/2” Bolt 16 3/8 X 4-1/2” Bolt 5 17 4 ½” Internal Lock Washer 3/8” Flat Washer 6 18 Backing Backing Dome Dome W Washer asher 3/8” Lock Nut ½” Lock Nut 7
Summary of the content on the page No. 8
7 1 6 5 4 8 3 2 STEP 1: LOOSELY assemble the FRONT LEFT UPRIGHT (1) to the LOWER LEFT BASE (2) using two 1/2 X 4-1/2” BOLTS (3), two BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5) and two 1/2” LOCK NUTS (6). LOOSELY assemble the FRONT RIGHT UPRIGHT (7) to the LOWER RIGHT BASE (8) using two 1/2 X 4-1/2” BOLTS (3), two BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5) and two 1/2” LOCK NUTS (6). NOTE: Make sure the FRONT LEFT & FRONT RIGHT UPRIGHTS (1 & 7) face the inside of the u
Summary of the content on the page No. 9
6 5 4 3 7 10 1 9 8 6 5 2 4 3 STEP 2: LOOSELY assemble the REAR CROSS BRACE (9) to the bottom of the LOWER LEFT BASE (2) and LOWER RIGHT BASE (8) using four 1/2 X 4-1/2” BOLTS (3), four BACKING DOME WASHERS (4), four 1/2” INT TOOTH LOCK WASHERS (5) and four 1/2” LOCK NUTS (6). LOOSELY assemble the PULL-UP SUPPORT (10) to the top of the FRONT LEFT UPRIGHT (1) and FRONT RIGHT UPRIGHT (7) using four 1/2 X 4 1/2” BOLTS (3), four BACKING DOME WASHERS (4), four 1/2” INT LOCK WASH- ERS (5) and four 1/
Summary of the content on the page No. 10
12 11 6 5 8 4 3 2 STEP 3: LOOSELY assemble the SHORT LEFT UPRIGHT (11) to the LOWER LEFT BASE (2) using two 1/2 X 4-1/2” BOLTS (3), two BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5), and two 1/2” LOCK NUTS (6). LOOSELY assemble the SHORT RIGHT UPRIGHT (12) to the LOWER RIGHT BASE (8) using two 1/2 X 4-1/2” BOLTS (3), two BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5), and two 1/2” LOCK NUTS (6). 10
Summary of the content on the page No. 11
7 1 3 4 12 13 11 4 3 5 6 6 5 STEP 4: LOOSELY assemble the two MULTI RACK FRONT SUPPORTS (13) to the FRONT LEFT & RIGHT UPRIGHTS (1 & 7) and the SHORT LEFT & SHORT RIGHT UPRIGHTS (11 & 12) using eight 1/2 X 4-1/2” BOLTS (3), eight 1/2” INT LOCK WASHERS (5), eight 1/2” BACKING DOME WASHERS (4), and eight 1/2” LOCK NUTS (6). 11
Summary of the content on the page No. 12
6 5 7 14 1 4 3 6 5 4 3 STEP 4: LOOSELY assemble the two REAR UPRIGHTS (14) to the LOWER LEFT & RIGHT BASES (2 & 8) and FRONT LEFT & RIGHT UPRIGHTS (1 & 7) using eight 1/2 x 4-1/2” BOLTS (3), eight 1/2” BACKING DOME WASHERS (4), eight 1/2” INT LOCK WASHERS (5), and eight 1/2” LOCK NUTS (6). 12 8 2
Summary of the content on the page No. 13
14 6 4 5 3 18 4 17 15 15 16 17 STEP 5: SECURELY assemble the bottom of the ten WEIGHT HORNS (15) to the REAR UPRIGHTS (14) using ten 3/8 x 4- 1/2” BOLTS (16), ten BACKING DOME WASHERS (4), twenty 3/8” FLAT WASHERS (17), and ten 3/8” LOCK NUTS (18). SECURELY assemble the top of the WEIGHT HORNS (15) to the REAR UPRIGHTS (14) using ten 1/2 X 4-1/2” BOLTS (3), ten 1/2” INT TOOTH LOCK WASHERS (9), ten BACKING DOME WASHERS (4), and ten 1/2” LOCK NUTS (5). 13
Summary of the content on the page No. 14
7 1 21 23 20 4 9 5 6 19 STEP 6: Assemble the SHORT BENCH LOCK (19) to the REAR CROSS BRACE (9) using two 1/2 X 3-1/2” BOLTS (20), two BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5), and two 1/2” LOCK NUTS (6). Insert the LEFT BAR SUPPORT (21) into the desired slots of the FRONT LEFT UPRIGHT (1), and allow it to drop down to lock in place. Insert the RIGHT BAR SUPPORT (22) into the desired slots of the FRONT RIGHT UPRIGHT (7), and allow it to drop down to lock in place. Insert one B
Summary of the content on the page No. 15
A A C B G D 7 F E 1 STEP 7: Spotter Platform accessories are available for the HDMR8. Assemble each Spotter Platform (A) to the FRONT LEFT & RIGHT UPRIGHTS (1 & 7) using two BOLTS (B), two DOME WASHERS (C), two SPACERS (D), one WEAR PLATE (E), two FLAT WASHERS (F), and two NUTS (G) as shown in the illustration. NOTE: All necessary hardware for the Spotter Platform assembly is included with the accessory. Make sure the flange on the SPACER (D) faces the inside of the rack. 15
Summary of the content on the page No. 16
Preventative Maintenance Tips Action Daily WeeklyQuarterly Bi-AnnuallyAs Needed Clean Hand Grips X Inspect Visual Overall X Hardware X Frame X Hand Grips X Clean: • Hand grips with mild soap and water. • Frame damage can be repaired with touch-up paint can be purchased from your Hammer Strength customer service representative. Inspect: • Hardware should be checked for looseness. Tighten as required. • Frames should be inspected for wear or damage. • Hand Grips should be checked for wear or
