Summary of the content on the page No. 1
OPERATOR’S MANUAL
BACKPACKER II
UT08072 and UT08572
Your blower has been engineered and manufactured to Homelite’s high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for buying a Homelite product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Summary of the content on the page No. 2
TABLE OF CONTENTS n Introduction ..................................................................................................................................................................... 2 �n General Safety Rules....................................................................................................................................................... 3 �n Specific Safety Rules..................................................................................................
Summary of the content on the page No. 3
GENERAL SAFETY RULES n Never operate the unit without a spark arrestor screen; WARNING: this screen is located inside the muffler. n Product users on United States Forest Service land, and READ AND UNDERSTAND ALL INSTRUCTIONS. Fail- in some states, must comply with fire prevention regula- ure to follow all instructions listed below, may result in tions. This product is equipped with a spark arrestor; electric shock, fire and/or serious personal injury. however, other user requirements may ap
Summary of the content on the page No. 4
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpre- tation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Precautions that involve your safety. To reduce the risk of injury, user must read and understand Read The Operator’s Manual operator’s manual before using this product. Eye and Hearing Protection Wear eye and hearing protection when operating this
Summary of the content on the page No. 5
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Summary of the content on the page No. 6
FEATURES PRODUCT SPECIFICATIONS Weight ....................................................................................................................................................................... 14.7 lbs. Engine displacement.......................................................................................................................................................30cc Air Velocity: MPH..........................................................................................
Summary of the content on the page No. 7
FEATURES KNOW YOUR BLOWER THROTTLE TRIGGER See Figure 1. The blower can be operated at any speed between idle and Before attempting to use this product, familiarize yourself full throttle. with all operating features and safety rules. TRIGGER LOCK BLOWER TUBES The trigger lock feature is used for easier starting and also The blower tubes can be assembled and installed on the allows the user to operate the blower without holding the blower using no tools. throttle trigger. To disengage the tri
Summary of the content on the page No. 8
ASSEMBLY THROTTLE CONTROL HANDLE WARNING: THROTTLE CABLE Disconnect the spark plug wire before assemblying parts. Failure to do so could result in possible serious personal injury. ASSEMBLING THE BLOWER TUBES See Figures 2 - 5. n Place large clamp on the elbow tube and install the elbow UPPER TUBE tube onto blower. Tighten large clamp securely. WING NUT Fig. 3 n Place large clamp on the bellows and install the bellows onto the elbow. Tighten clamp securely. n Insert upper tube into throttle
Summary of the content on the page No. 9
ASSEMBLY ASSEMBLING HARNESS STRAPS EXTRUDED END SHORT LOOPED See Figures 6 - 7. END OF STRAP OF BRACKET n Place short looped end of the harness strap through the top bracket. Open loop and slide onto extruded end of the bracket. n Lace long end of the harness strap through the slot in the backpack frame. n Thread the harness strap end through the center of buckle and then through the top toothed portion and tighten. n Repeat steps to attach the second harness strap to the blower. CAUTION:
Summary of the content on the page No. 10
OPERATION FILLING THE TANK WARNING: WARNING: Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is Always stop the engine before filling the fuel tank. Never sufficient to inflict serious injury. add fuel to a machine with a running or hot engine. Move at least 30 ft. from the refueling area before starting engine. Do not smoke while filling the tank. WARNING: �n Clean the surface around the fuel cap to prevent con- Always wear safety gog
Summary of the content on the page No. 11
OPERATION STARTING AND STOPPING See Figures 8 - 9. TO START: n Place the blower on a flat, bare surface. THROTTLE �n Disengage the trigger lock. TRIGGER n Push the primer bulb, slowly, 7 times. n Do not engage the handle while starting. n Set choke to START position. TRIGGER n Pull the starter handle until the engine runs. SWITCH LOCK n Allow the engine to run 15 seconds, then engage the Fig. 8 trigger to operate TO STOP: PRIMER BULB Release the trigger and press STOP ( O ) until the engine
Summary of the content on the page No. 12
OPERATION n Conserve water by using power blowers instead of hoses n Use the nozzle for larger volume, so the air stream can for many lawn and garden applications, including areas work close to the ground. such as gutters, screens, patios, grills, porches, and n After using blowers or other equipment, CLEAN UP! gardens. Dispose of debris properly. n Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away. MAINTENANCE REPLACING AND CLEANING THE AIR FILT
Summary of the content on the page No. 13
MAINTENANCE The fuel cap contains a non-serviceable filter and a check SPARK ARRESTOR valve. A clogged fuel filter will cause poor engine performance. The muffler is equipped with a spark arrestor screen inside If performance improves when the fuel cap is loosened, the the muffler body. After extended use the screen can become check valve may be faulty or filter clogged. Replace the fuel dirty; you may need to have the muffler replaced by an cap if required. authorized servicing dealer. S
Summary of the content on the page No. 14
TROUBLESHOOTING IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICING DEALER. PROBLEM POSSIBLE CAUSE SOLUTION Engine will not start. 1. No spark. 1. Check spark. Remove spark plug. Reattach the spark plug cap and lay spark plug on metal cylinder. Pull the starter rope and watch for spark at spark plug tip. If there is no spark, repeat test with a new spark plug. 2. No fuel. 2. Push primer bulb until fuel is visible in the bulb. If fuel is not apparent, the primary fue
Summary of the content on the page No. 15
WARRANTY LIMITED WARRANTY STATEMENT In addition, this warranty does not cover: Homelite Consumer Products, Inc. warrants to the original A. Tune-ups – Spark Plugs, Carburetor, Carburetor retail purchaser that this HOMELITE product is free from Adjustments, Ignition, Filters defect in material and workmanship and agrees to repair or B. Wear items – Bump Knobs, Outer Spools, Cutting Lines, replace, at Homelite Consumer Products, Inc.’s discretion, Inner Reels, Starter Pulleys, Starter Ropes, D
Summary of the content on the page No. 16
WARRANTY THE FOLLOWING CALIFORNIA AIR RESOURCES BOARD (CARB) STATEMENT ONLY APPLIES TO MODEL NUMBERS REQUIRED TO MEET THE CARB REQUIREMENTS. HOMELITE CONSUMER PRODUCTS, INC., LIMITED WARRANTY FEDERAL AND CALIFORNIA EMISSION CONTROL SYSTEMS NONROAD AND SMALL OFF-ROAD ENGINES The U.S. Environmental Protection Agency (EPA), the California Air Resources Board (CARB), and Homelite Consumer Products, Inc. are pleased to explain the Emission Control System Warranty on your nonroad or small off-road
Summary of the content on the page No. 17
WARRANTY THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER Congratulations! You have made an investment toward protecting the environment. In order to maintain this product’s original emission level, please refer to the maintenance section below. EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LIST Emissions Parts Inspect Before Clean Every Replace Clean Every Replace Every Each Use 5 Hours
Summary of the content on the page No. 18
OPERATOR’S MANUAL BACKPACKER II UT08072 and UT08572 WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. CALIFORNIA PROPOSITION 65 SERVICE For parts or service, contact your nearest Homelite authorized service dealer. Be sure to provide all relevant information when you call or visit. For the location of the authorized service dealer nearest you, please call 1-800-242-4672 or visit u
