Summary of the content on the page No. 1
FORCE BLOWER 8 Owner’s Manual
Patent Pending
BILLY GOAT FORCE BLOWER
F800
Owner's Manual
Accessories
FRONT AIR THROTTLE
HOLD DOWN KIT PARKING BRAKE
AIM AND SHOOT
DIVERTER CONTROL
To secure Effective and
Simple to attach, Allows up and down Positions throttle
blower for Easy to use to
allowing air to be motion via a lever to control at a
transportation prevent blower
directed forward. easily move debris. convenie
Summary of the content on the page No. 2
FORCE BLOWER Owner’s Manual ABOUT THIS MANUAL ® THANK YOU for purchasing a BILLY GOAT FORCE Blower. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your FORCE Blower in top running order. Read this manual carefully before assembling, operating, or servicing your equipment. CONTENTS SERIAL PLATE DATA AND SPECIFI
Summary of the content on the page No. 3
FORCE BLOWER 8 Owner’s Manual SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications F800 Engine: HP 8 HP (5.96kW) Engine: Model 202432-0210-E9 Engine: Type B & S Engine: Fuel Capacity 4 qt. (3.78L) Engine: Oil Capacity 28 oz. (0.8L) Total Unit Weight: 144# (65.3Kg) Overall Length: 58"(1.43m) Overall Wi
Summary of the content on the page No. 4
FORCE BLOWER Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment. This symbol indicates important information that will prevent injury to yourself or others. This symbol indicates ear protection is recommended when operating this equipment. This symbol indicates eye protection is recommended when operating this equ
Summary of the content on the page No. 5
FORCE BLOWER 8 Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled. Move equipment aw
Summary of the content on the page No. 6
FORCE BLOWER Owner’s Manual INTENDED USE This machine is designed for cleaning outdoor surfaces, where the debris can be effectively blown into a consolidated area for convenient pickup and removal. Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper impeller bolt torque speci
Summary of the content on the page No. 7
FORCE BLOWER 8 Owner’s Manual PACKING CHECKLIST These items should be included in your carton. If any of these parts are missing, contact your dealer. ® Your BILLY GOAT FORCE Blower was shipped in one carton, completely assembled except for the Upper Handle Assembly and Front Diverter. Mounting hardware for the Upper Handle Assembly can be found in the parts bag. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assem
Summary of the content on the page No. 8
FORCE BLOWER Owner’s Manual ASSEMBLY 1.Follow the steps in figures A then securely tighten all hardware shown. 2.Connect spark plug wire. Figure A The hardware for attaching the upper handle to the lower is in the parts bag. Install upper handle (item 49), to preassembled lower handle (item 28) by sliding the upper over and down the outside of the lower handle. Using bolt (item #36), washers (item #10) & lock nut (item #11) to install upper handle to lower handle. Finish
Summary of the content on the page No. 9
FORCE BLOWER 8 Owner’s Manual HANDLING & TRANSPORTING: Using two people to lift machine is recommended. Lift holding the handle and handle brace. Secure in place during transportation. See unit specifications on page 3 for unit weight. Do not use the front grill as an anchor point when securing the unit for transport. Never lift the machine while the engine is running. BLOWING OPERATION Your Billy Goat Force blower is equipped with an air director cone to allow the operator to
Summary of the content on the page No. 10
FORCE BLOWER Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Daily or Every Every 25 Every 50 Every Use 5 Hours Hours Hours 100-150 Hours Inspect for worn or damaged parts. Check for excessive vibration Inspect Impeller for cracks or damage Inspect for loose parts. IMPELLER REMOVAL 1. Wait for engine to cool and disconnect spark plug. 2. Remove housing
Summary of the content on the page No. 11
FORCE BLOWER 8 Owner’s Manual TROUBLESHOOTING Problem Possible Cause Solution Abnormal vibration. · Loose or out of balance impeller. · Check impeller and replace if required. · Loose engine. · Check engine. Engine will not start. · Engine not in full choke position. · Check choke position. · Out of gasoline or bad, old gasoline. · Check gasoline. · Spark Plug wire disconnected. · Connect spark plug wire. · Gas valve off. · Turn on gas valve. · Dirty air cleaner. · Clean or r
Summary of the content on the page No. 12
FORCE BLOWER Owner’s Manual ILLUSTRATED PARTS LIST Part No 440187 Form No F091907C 12
Summary of the content on the page No. 13
FORCE BLOWER 8 Owner’s Manual PARTS LIST F800 ITEM NO. DESCRIPTION PART NUMBER QTY. 1 ENGINE 8 HP B&S 440181 1 2 BASE ENGINE WA 440011 1 3 SPACER RING ENGINE 440009 1 4 PLATE REINFORCE HOUSING 440010 2 5 HOUSING FRONT MOLDED 440023 1 6 HOUSING BACK MOLDED 440024 1 7 WASHER LOCK 3/8 TWISTED TOOTH 400502 4 WASHER LOCK 7/16 S/T MED 8177013 1 8 SCREW CAP 3/8-16X1 1/2 ZP 8041052 4 9 ROD HAND STOP 440057 1 10 WASHER 5/16 FLATWASHER Z/P 8171003 16 11 NYLON INSERT LOCKNUT 5/16
Summary of the content on the page No. 14
FORCE BLOWER Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 440187 Form No F091907C 14
Summary of the content on the page No. 15
FORCE BLOWER 8 Owner’s Manual BRUSH CUTTER FORCE BLOWER AERATOR If you liked this product please feel free to view our full line of quality lawn care, renovation, and debris removal products at www.billygoat.com QL VACUUM MULTI VACUUM POWER RAKE Part No 440187 Form No F091907C 15
