Summary of the content on the page No. 1
¨
Model No. WLEX27180
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis-
faction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will p
Summary of the content on the page No. 2
¨ TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 HOW TO USE THE EXERCISE
Summary of the content on the page No. 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precautions before ¨ using the WESLO PURSUIT 675s. 1. Read all instructions in this manual before 8. Always keep your back straight when using using the exercise cycle. the exercise cycle. Do not arch your back. 2. It is the responsibility of the owner to ensure 9. If you feel pain or dizziness at any time that all users of the exercise cycle are ade- while exercising, stop immediately and quately i
Summary of the content on the page No. 4
BEFORE YOU BEGIN ¨ Thank you for selecting the innovative WESLO through Friday, 6 a.m. until 6 p.m. Mountain Time PURSUIT 675s. The PURSUIT 675s offers a unique (excluding holidays). To help us assist you, please form of low-impact exercise that offers greater cardio- mention the product model number and serial number vascular benefits and increased muscle toning. And when calling. The model number is WLEX27180. The the 675s features adjustable resistance to let you tai- serial number can be fou
Summary of the content on the page No. 5
ASSEMBLY ¨ Place all parts of the WESLO PURSUIT 675s in a cleared area and remove the packing materials. Do not dis- pose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench , and phillips screwdriver . PART CHART Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part; the second number refers to the quantity us
Summary of the content on the page No. 6
1. Loosen the Frame Knob (29) on the right side of the 1 Frame (1). Slide the Seat Frame (2) out until it stops. Tighten the Frame Knob. 29 1 2 2. Run the Reed Switch Wire Extension (62) down 2 61 through the Handlebar Post (3) and plug it into the 62 Reed Switch Wire (42). Push the Resistance Cable (61) up through the Handlebar Post. Attach the 3 Handlebar Post (3) to the Frame (1) with three M8 x 15mm Button Screws (53) and three M8 x 19mm Washers (54). Be careful not to pinch the Reed 53 Swi
Summary of the content on the page No. 7
5. Attach the Seat Upright (57) to the Seat Frame (2) 5 with four M8 x 55mm Carriage Bolts (11) and four M8 Nylon Locknuts (55). Note: It may be helpful to tip the exercise cycle on its side to attach the Seat Upright. 55 57 55 2 11 11 6. Attach the Stabilizer (30) to the Seat Frame (2) with 6 two M8 x 70mm Carriage Bolts (27) and two M8 Nylon Locknuts (55). 55 2 30 55 27 7. Attach the Seat Bracket (56) to the Seat Upright 7 (57) with four M8 x 65mm Carriage Bolts (52) and four M8 Nylon Locknuts
Summary of the content on the page No. 8
8. Attach the Seat (44) to the Seat Bracket (56) with 8 44 four M6 x 16mm Hex Head Screws (46). 56 46 9. Attach the Seat Handles (25) to the Seat Bracket 9 25 (56) with two M8 x 100mm Hex Head Bolts (12), 26 two M8 Washers (26) and two M8 Nylon Locknuts 55 (55). 26 12 56 25 12 10. Attach the Backrest (45) to the Seat Upright (57) 10 with four M6 x 16mm Hex Head Screws (46). 45 46 57 8
Summary of the content on the page No. 9
11. Identify the Left Pedal (39) (there is an ÒLÓ on the 11 Left Pedal for identification). Using an adjustable wrench, tighten the Left Pedal counterclockwise into the left arm of the Crank (7). 10 Tighten the Right Pedal (not shown) clockwise into 7 39 the right arm of the Crank (7). Adjust the Pedal Strap (10) on the Left Pedal (39) to the desired position. Press the Pedal Strap onto the Adjustment Tab on the Left Pedal. Adjustment Tab Adjust the Pedal Strap on the Right Pedal (not shown) i
Summary of the content on the page No. 10
DESCRIPTION OF THE CONSOLE HOW TO OPERATE THE CONSOLE 1. To turn on the power, press the on/reset button or simply begin pedaling. When the power is turned on, the entire Mode Indicator display will appear for two seconds. The console will then be ready for opera- tion. 2. Select one of the six modes: Scan modeÑWhen the power is turned on, the scan mode will automatically be selected. One The console features six modes that provide instant mode arrow will show that the scan mode is select- exe
Summary of the content on the page No. 11
MAINTENANCE Inspect and tighten all parts of the exercise cycle reg- Crank for a moment. Repeat until the console dis- ularly. The exercise cycle can be cleaned with a soft, plays correct feedback. When the Reed Switch is cor- damp cloth. To prevent damage to the console, keep rectly adjusted, reattach the left side shield and the liquids away from the console and keep the console left pedal. out of direct sunlight. CRANK ADJUSTMENT 51 43 7 If the arms of the Crank (7) become loose, they shoul
Summary of the content on the page No. 12
HOW TO ADJUST THE RESISTANCE BELT the Belt by pulling it slightly and then refasten the end of the Belt. Turn the Crank (7) for a moment to make If the pedals do not have enough resistance, even sure that there is not too much resistance. When the when the resistance knob is turned to the maximum Resistance Belt is properly adjusted, reattach the left setting, the Resistance Belt (49) may need to be side shield and pedal. adjusted. To adjust the Resistance Belt, the left side shield must first b
Summary of the content on the page No. 13
CONDITIONING GUIDELINES Burning Fat WARNING: Before beginning this or any To burn fat effectively, you must exercise at a relative- exercise program, consult your physician. ly low intensity level for a sustained period of time. This is especially important for individuals During the first few minutes of exercise, your body over the age of 35 or individuals withpre- uses easily accessible carbohydrate calories for ener- existing health problems. gy. Only after the first few minutes of exercise d
Summary of the content on the page No. 14
A Cool-downÑFinish each workout with 5 to 10 min- workouts. After a few months of regular exercise, you utes of stretching. This will increase your flexibility and may complete up to five workouts each week if will help to prevent post-exercise problems. desired. EXERCISE FREQUENCY Remember, the key to success is make exercise a regular and enjoyable part of your everyday life. To maintain or improve your condition, plan three work- outs each week, with at least one day of rest between PART LIS
Summary of the content on the page No. 15
EXPLODED DRAWINGÑModel No. WLEX27180 R0100A 32 28 61 62 31 59 13 43 33 13 6 28 43 21 3 23 53 54 53 54 58 8 7 23 13 38 34 9 25 20 31 28 42 55 47 51 56 26 43 48 40 1 4 5 41 13 18 26 60 47 22 12 55 50 34 28 19 17 22 9 7 22 25 12 29 37 52 22 14 57 60 37 36 18 16 15 49 55 19 50 17 35 55 55 37 10 44 45 39 55 24 37 2 24 46 30 46 27 11 11 15
Summary of the content on the page No. 16
ORDERING REPLACEMENT PARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give the following information: ¥ The MODEL NUMBER of the product (WLEX27180). ¨ ¥ The NAME of the product (WESLO PURSUIT 675s). ¥ The SERIAL NUMBER of the product (see the front cover of this manual). ¥ The KEY NUMBER and DESCRIPTION of the part(s) (
