Weider WESY96310 user manual

User manual for the device Weider WESY96310

Device: Weider WESY96310
Category: Home Gym
Manufacturer: Weider
Size: 1.29 MB
Added : 6/15/2013
Number of pages: 32
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Weider WESY96310. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Weider WESY96310.

For your convenience

If looking through the Weider WESY96310 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Weider WESY96310 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Weider WESY96310 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Weider WESY96310 User manual - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Weider WESY96310 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Weider WESY96310. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Model No. WESY96310
Serial No.
Write the serial number in the
USER'S MANUAL
space above for reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you have
questions, or find that there are
missing or damaged parts, we
will guarantee you complete sat-
isfaction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-

Summary of the content on the page No. 2

TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ADJUSTMENTS . . . . . . .

Summary of the content on the page No. 3

IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the weight system. 1. Read all instructions in this manual and in 11. Keep hands and feet away from moving parts. the accompanying literature before using the weight system. Use the weight system only 12. Make sure that the cables remain on the pul- as described in this manual. leys at all times. If the cables bind while you are exercising, stop immediately and make 2. It

Summary of the content on the page No. 4

BEFORE YOU BEGIN ® Thank you for selecting the versatile WEIDER 30CT Service Department toll-free at 1-800-999-3756, ® weight system. The WEIDER 30CT offers a selection Monday through Friday, 6 a.m. until 6 p.m. Mountain of weight stations designed to develop every major Time (excluding holidays). To help us assist you, muscle group of the body. Whether your goal is to tone please note the product model number and serial your body, build dramatic muscle size and strength, or number before callin

Summary of the content on the page No. 5

ASSEMBLY 4) seat assembly, and 5) VKR assembly. The Make Things Easier for Yourself hardware for each stage is packaged separately. Wait until you begin each assembly stage to open Everything in this manual is designed to ensure the parts bag labeled for that assembly stage. that the weight system can be assembled suc- cessfully by anyone. However, it is important to • For help identifying small parts, use the PART realize that the versatile weight system has IDENTIFICATION CHART in the center o

Summary of the content on the page No. 6

2. Press a 2” Square Inner Cap (27) into the Leg 2 27 Press Upright (56). Press a 2” Square Inner Cap into the VKR Upright (74). 27 Slide the VKR Upright (74) and the Leg Press Upright (56) onto the indicated 5/16” x 2 1/2” 87 Carriage Bolts (1) in the Stabilizer (5). Note: The High Sides high side of the brackets on the VKR Upright of Brackets 91 and Leg Press Upright should be on the side 74 shown. Hand tighten four 5/16” Nylon Locknuts 56 (3) onto the Carriage Bolts. Do not tighten the Nylon

Summary of the content on the page No. 7

4. Press a 2” Square Inner Cap (27) into the end of 4 11 the Top Frame (55). Press a 1 3/4” Square Inner 102 55 Cap (44) into each end of the crossbar on the Top 44 8 Frame. Press two Round Inner Caps (102) into the top of the crossbar. 27 3 Attach the Top Frame (55) to the VKR Upright (74) and the Leg Press Upright (56) with two Crossbar 44 5/16” x 2 3/4” Bolts (11) and two 5/16” Nylon Locknuts (3). Attach the Top Frame (55) to the Front Upright 3 11 (42) with two 5/16” x 2 3/4” Bolts (11), tw

Summary of the content on the page No. 8

7. Press a Weight Tube Bumper (64) into the end of 7 a Weight Tube (63). Insert the Weight Tube into Holes the front stack of Weights (25). Be sure that the pin on the Weight Tube is sitting in the pin 62 grooves in the top Weight. Lubricate the inside of the holes in a Top Weight (65). Set the Top Weight onto the front stack of Weights (25). Insert both Long Weight Guides (62) into the stack of Weights. Be sure that the holes in the Weight Guides are at the top, as shown. 65 Lubricate Pin 63 64

Summary of the content on the page No. 9

9. Attach the upper ends of the Short Weight Guides 9 61 61 (73) to the Top Frame (55) with a 5/16” x 6” Bolt 3 (60), two 1/2” x 3/4” Spacers (61), and a 5/16” 3 55 Nylon Locknut (3). 60 Attach the upper ends of the Long Weight Guides (62) to the Top Frame (55) with a 5/16” x 6” Bolt (60), two 1/2” x 3/4” Spacers (61), and a 5/16” 73 60 Nylon Locknut (3). 62 ARM ASSEMBLY 10. Locate and open the parts bag labeled “ARM 10 27 95 ASSEMBLY.” Welded Be sure there is a Bushing (98) in each side of the

Summary of the content on the page No. 10

12. Press a 1” Round Inner Cap (49) into one of the 12 44 49 Press Arms (46). Press a 1 3/4” Square Inner Cap (44) into the Press Arm. Attach the Press Arm (46) to one side of the 46 Press Frame (17) with two 5/16” x 2 1/2” Bolts (22) and two 5/16” Nylon Locknuts (3). 22 Assemble the other Press Arm (46) in the same manner. 46 3 17 13. Identify the Right Arm (48) and the Left Arm (47). 31 86 13 Note the position of the welded bracket on each 50 Arm. Arm identification is very important for 31 st

Summary of the content on the page No. 11

15. See the inset drawing. Attach the Military Press 15 32 Arm (84) to the Pivot Arm (101) with two 5/16” x 49 2 1/4” Bolts (33) and two 5/16” Nylon Locknuts 32 (3). Press two 1 1/2” Square Inner Caps (32) into the indicated end of the Military Press Arm (84). Press two 1” Round Inner Caps (49) into the 21 Military Press Arm. Slide two 5” Plastic Grips (83) 84 83 onto the Military Press Arm. 101 Attach the Military Press Arm (84) to the VKR 67 Upright (74) with a 3/8” x 3 1/4” Bolt (67) and a 3

Summary of the content on the page No. 12

18. Wrap the High Cable (58) around a “V”-Pulley 18 (50). Attach the Pulley and a Long Cable Trap 86 (31) to the indicated bracket on the Front Upright 31 (42) with a 3/8” x 2 1/2” Bolt (86) and a 3/8” Nylon Locknut (21). Be sure that the Long Cable Trap 58 50 is positioned to hold the Cable in place. Bracket 42 21 19. Route the High Cable (58) around the “V”-Pulley 19 (50) on the Left Arm (47). Be sure that the Cable is in the groove of the Pulley and that the 31 86 50 Long Cable Trap (31) is p

Summary of the content on the page No. 13

22. See the inset drawing. Attach a 3 1/2” Pulley (15) 22 and a Cable Trap (66) to the upper hole in a Long “U”-Bracket (57) with a 3/8” x 2” Bolt (12) and a 58 3/8” Nylon Locknut (21). Be sure that the Cable Trap is inside the Long “U”-Bracket. Note: This may come pre-assembled. 66 15 Route the High Cable (58) between the Cable 15 21 Trap (66) and the 3 1/2” Pulley (15) shown in the inset drawing. Be sure that the Cable is in the 12 58 57 groove of the Pulley and that the Cable and Pulley move

Summary of the content on the page No. 14

25. Locate the Low Cable (23). Route the Low 25 Cable under the 3 1/2” Low Pulley (76) attached to the lower hole in the Press Frame (17). Be sure that the ball on the Cable is on the indi- 21 cated side of the Press Frame and that the 76 Cable is between the Pulley and the crossbar 23 on the Press Frame. Tighten the 3/8” Nylon Ball Locknut (21) and the 3/8” x 3 3/4” Bolt (not shown). Crossbar 17 26. Wrap the Low Cable (23) around a 3 1/2” Pulley 15 26 23 42 (15). Attach the Pulley and a Cable T

Summary of the content on the page No. 15

29. Attach the end of the Low Cable (23) to the Long 29 “U”-Bracket (57) with a 1/4” Nylon Locknut (2) and a 1/4” Washer (10). Do not completely tighten the Nylon Locknut; it should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing. 2 57 2 10 23 57 23 30. Attach the High Cable (58) to a Small “U”-Bracket 30 (71) with a 1/4” Nylon Locknut (2) and a 1/4” Washer (10). Do not completely tighten the Nylon Locknut; it s

Summary of the content on the page No. 16

32. Wrap the Military Press Cable (72) around a 32 3 1/2” Pulley (15). Attach the Pulley to the Top 55 Frame (55) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21). 15 See the inset drawing. Wrap the Military Press 21 12 Cable (72) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the bracket on 72 the Stabilizer (5) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21). Be sure that the Cable Trap is turned to hold the Cable in place. 72 12 Bracket 66 15 21 5

Summary of the content on the page No. 17

34. See inset drawing A. Attach a 3 1/2” Pulley (15) 34 and a Cable Trap (66) to the upper hole in a Long 15 A “U”-Bracket (57) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21). Be sure that the Cable 21 66 Trap is inside the Long “U”-Bracket. (Note: This may come pre-assembled.) Route the Military Press Cable (72) between the 57 12 Cable Trap (66) and the 3 1/2” Pulley (15). Be sure that the Cable is in the groove of the B Pulley and that the Cable and Pulley move smoothly. 101 11 See i

Summary of the content on the page No. 18

36. Attach the Press Bracket (94) to the Leg Press 36 Arm (96) with a 3/8” x 3” Bolt (103) and a 3/8” Nylon Jamnut (104). Wrap the Leg Press Cable (99) around a 3 1/2” Pulley (15). Attach the Pulley to the Press Bracket (94) with the 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21). Slide a 5/16” Washer (8) onto a 5/16” x 2 3/4” Bolt 96 (11). Insert the Bolt through the lowest hole in the 12 Rear Seat Frame (100) from the indicated side. 104 11 (Note: The three holes are for cable adjustment.)

Summary of the content on the page No. 19

39. Attach the Front Backrest (41) to the Front 39 42 Upright (42) with two 1/4” x 2 1/2” Screws (43) and two 1/4” Washers (10). Note: The Backrest must be oriented as shown. 41 10 43 Thick End 40. Press a 1 1/2” Square Inner Cap (32) into the 40 Front Seat Frame (36). 13 Insert a 1/4” x 2” Carriage Bolt (38) through the center hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4” x 3/4” Screws 38 (18). 37 32 Insert the 1/4” x 2” Carriage Bolt (38) through the 18 in

Summary of the content on the page No. 20

43. Press two 3/4” Round Inner Caps (34) into each 43 Pad Tube (28). Insert a Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the 30 Pad Tube. 34 28 Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Foam Pad (30) onto each end 34 36 of the Pad Tube. 30 29 44 VKR ASSEMBLY 75 80 44. Locate and open the parts bag labeled “VKR ASSEMBLY.” 3 74 Press two 1 1/2” Square Inner Caps (32) into the 32 ends of the Left and Right VKR Arms (79, 80). 79


Alternative user manuals
# User manual Category Download
1 Weider 140 User manual Home Gym 106
2 Weider 150722 User manual Home Gym 35
3 Weider 148 User manual Home Gym 35
4 Weider 500 User manual Home Gym 16
5 Weider 220 User manual Home Gym 20
6 Weider 240 TC User manual Home Gym 19
7 Weider 16.8ST User manual Home Gym 5
8 Weider 5000 User manual Home Gym 16
9 Weider 28ST User manual Home Gym 10
10 Weider 740 User manual Home Gym 35
11 Weider 15CT User manual Home Gym 13
12 Weider 831.14622.0 User manual Home Gym 14
13 Weider 2000X WESY7773.1 User manual Home Gym 25
14 Weider 831.150280 User manual Home Gym 9
15 Weider 831.150291 User manual Home Gym 4
16 Aqua Leisure FF 6910 E User manual Home Gym 1
17 Aqua Leisure FF 6910 F User manual Home Gym 1
18 Aqua Leisure FF-6915 E User manual Home Gym 1
19 Aqua Leisure Fitness FF-6905 User manual Home Gym 1
20 Aqua Leisure FF-6915 F User manual Home Gym 0