Weider WESY74090 user manual

User manual for the device Weider WESY74090

Device: Weider WESY74090
Category: Home Gym
Manufacturer: Weider
Size: 0.76 MB
Added : 7/12/2014
Number of pages: 27
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Weider WESY74090. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Weider WESY74090.

For your convenience

If looking through the Weider WESY74090 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Weider WESY74090 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Weider WESY74090 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Weider WESY74090 User manual - Online PDF
Advertisement
« Page 1 of 27 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Weider WESY74090 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Weider WESY74090. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

®
Model No. WESY74090
Serial No.
USER’S
The serial number is found in the
location shown below. Write the
MANUAL
serial number in the space above.
Serial
Number
Decal
QUESTIONS?
We are committed to providing
complete customer satisfaction.
If you have questions, or if there
are missing or damaged parts,
we will guarantee complete satis-
faction through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cia

Summary of the content on the page No. 2

Table of Contents Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warning Decal Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before Yo

Summary of the content on the page No. 3

Important Precautions To reduce the risk of serious injury, read the following important precautions before using the weight system. WARNING: 1. It is the responsibility of the owner to ensure 7. Keep children under the age of 12 and pets that all users of the weight system are ade- away from the weight system at all times. quately informed of all precautions. 8. Keep hands and feet away from moving parts. 2. Read all instructions in this manual and in the accompanying literature before using

Summary of the content on the page No. 4

Before You Begin ® Thank you for selecting the versatile WEIDER 740 Department toll-free at 1-888-936-4266, Mon.–Fri., 8 Weight System. The 740 offers a selection of weight a.m.–6:30 p.m. EST (excluding holidays). To help us stations designed to develop every major muscle assist you, please note the product model number and group of the body. Whether your goal is to tone your serial number before calling. The model number is body, build dramatic muscle size and strength or WESY74090. The serial

Summary of the content on the page No. 5

Assembly Note: This introduction will save you more Identifying Parts time than it takes to read it! To help you identify the small parts used in assem- bly, we have included a PART IDENTIFICATION CHART in the centre of this manual. Place the chart Making Things Easier for Yourself on the floor or work table and use it to quickly identi- Everything in this manual is designed to ensure fy different parts as you open the packages for each that the assembly of our products can be complet- step. ed

Summary of the content on the page No. 6

1 Frame Assembly 5 1. Before beginning assembly, make sure you have read and understood the information on page 5. 14 3 Locate and open the parts bag labeled “FRAME 62 ASSEMBLY.” Press a 1 1/2” Square Outer Cap (27) onto each end of the Stabilizer (5) and place it on the floor as 4 shown. 3 Press a 1 1/2” Square Outer Cap (27) onto each end of the Base (4) and place it on the floor as shown. Place the bracket on the Weight Guide (62) over the 5 Stabilizer (5). Note: It will be helpful to have a

Summary of the content on the page No. 7

3. Attach the two Weight Bumpers (19) to the Stabilizer 3 (5) with two #8 x 1” Screws (18). Slide the six Weights (25) onto the two tubes on the Weight Guide (62). 62 Note: Make sure all of the Weights are turned so the pin grooves are on the same side and that the grooves are oriented as shown in the drawing. Pin Grooves 25 18 18 19 19 5 4. Press the Weight Tube Bumper (64) into the end of 4 the Weight Tube (63). 67 Insert the Weight Tube (63) into the stack of Weights Slot (25). Lubricate t

Summary of the content on the page No. 8

6. Attach the two tubes on the Weight Guide (62) to the 6 Top Frame (55) in the following manner: Slide a 5/16” x 6” Bolt (7) through one of the tubes on 61 51 the Weight Guide (62) until the tip is barely visible on 3 the other side. Position a 1/2” x 1” Spacer (51) and slide the Bolt through it. Then slide the Bolt through 51 55 one sidewall of the Top Frame (55). Position a 1/2” x 1 3/8” Spacer (61) inside the Top Frame (55) and slide the 5/16” x 6” Bolt (7) through it. 7 Then slide the Bo

Summary of the content on the page No. 9

9. Identify the Right Arm (48) and the Left Arm (47) by 9 imagining yourself sitting on the seat. Note the posi- tion of the welded bracket (A) on each Arm. Arm 77 identification is very important for this step. 17 Lubricate Lubricate both axles on the Press Frame (17). Slide the Right Arm (48) onto the right axle. Note: Be care- 47 ful not to confuse the Right and Left Arm. Make B 77 sure the upper end of the Right Arm is behind the 69 indicated bracket (B) on the Press Frame. A Lubricate 70 Pl

Summary of the content on the page No. 10

12 Cable/Seat Assembly 44 15 12. Locate the parts bag labeled “CABLE ASSEMBLY AND PULLEYS.” For cable identification and rout- 12 44 ing during steps 12 through 27, refer to the Cable 58 Diagram and Cable ID Chart on pages 15 and 16. 9 22 Slide a 3/8” Flat Washer (9) and a 1/2” x 1/4” Spacer 9 (44) onto a 3/8” x 2” Bolt (12). Next, hold a 3 1/2” Pulley (15) inside the slot in the Top Frame (55), and 78 insert the Bolt through the Top Frame and the Pulley. 32 Slide another 1/2” x 1/4” Spacer (44)

Summary of the content on the page No. 11

15. Refer to drawing 15a. Remove the 5/16” x 6” Bolt (7), 15a 15b the two 1/2” x 1” Spacers (51), the 1/2” x 1 3/8” 44 61 Spacer (61), and the 5/16” Nylon Locknut (3) from the 15 3 Weight Guides (62) and the Top Frame (55). 22 51 44 Refer to drawing 15b. Route the Short Cable (58) up 7 through the indicated slot in the Top Frame (55). Wrap 9 the Short Cable around a 3 1/2” Pulley (15) in the 55 direction shown and slide the Pulley into the slot in 32 the Top Frame from the back. Attach the Pull

Summary of the content on the page No. 12

19. Remove the pre-attached Pulleys (15) from the Pulley 19 Bracket (57). 76 Wrap the Butterfly Cable (76) around a 3 1/2” Pulley (15) in the direction shown. Attach the Pulley to the 15 upper part of the Pulley Bracket (57) with a 3/8” x 1 3/4” Bolt (68) and a 3/8” Nylon Jamnut (22). 22 68 57 20. Wrap the Butterfly Cable (76) around a Large Pulley 20 View from behind the unit (39) in the direction shown. 42 Attach the Large Pulley (39) and a Long Cable Trap (50) to the welded bracket on the l

Summary of the content on the page No. 13

23. Wrap the Long Cable (23) around a 3 1/2” Pulley (15) 23 in the direction shown. 20 Attach the 3 1/2” Pulley (15) and a Cable Trap (66) to the to the lower hole in the “I”-Plates (20) with a 3/8” 21 x 2” Bolt (12) and a 3/8” Nylon Locknut (21). Note: 15 Make sure the Cable Trap is oriented as shown. 66 12 23 24. Wrap the Long Cable (23) around a 3 1/2” Pulley (15) 24 in the direction shown. Attach the 3 1/2” Pulley (15) and a Cable Trap (66) to 21 the indicated hole in the welded bracket on

Summary of the content on the page No. 14

27. Hook the closed loop on the end of the Long Cable 27 (23) onto the 3/8” Eyebolt (35) that is mounted on the Leg Lever (29). Tighten the 5/16” Nylon Locknut (3) that is securing the other end of the Long Cable (23) to the Upright/Base. 23 29 35 3 28. Attach the Backrest (41) to the Upright (42) with two 28 1/4” x 2” Screws (24) and two 1/4” Flat Washers (10). 41 42 24 10 24 29. Insert the 1/4” x 2 1/4” Carriage Bolt (38) into the cen- 29 13 tre hole in the Seat Plate (37). Attach the Seat Pl

Summary of the content on the page No. 15

30. Press a 3/4” Round Inner Cap (34) into each end of 30 the Pad Tube (28). 29 Insert the Pad Tube (28) through the indicated hole in 34 the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad Tube. 30 28 30 34 31. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 17 of this manual. Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly over the pul

Summary of the content on the page No. 16

Cable Diagram (2) 4 2 Long Cable (23) 6 3 1 8 5 7 Cable ID Chart 76, 87 1/2” 58, 130” 23, 233” 16

Summary of the content on the page No. 17

Adjustment The instructions below describe how each part of the weight system can be adjusted. Refer to the exercise poster accompanying this manual to see how the weight system should be set up for each exercise. IMPOR- TANT: When attaching the lat bar, make sure it is in the correct starting position for the exercise to be performed. If there is any slack in the cables as an exercise is performed, the effectiveness of the exer- cise will be reduced. Changing the Weight Setting To change the s

Summary of the content on the page No. 18

Trouble-shooting and Maintenance Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. Tightening the Cables 1 Woven cable, the type of cable used on the home gym system, can stretch slightly when it is first used. If there is slack in the Cables before resistance is felt, the Cables should be tightened. To tighten the Cables, insert the

Summary of the content on the page No. 19

Weight Resistance Chart This chart shows the approximate weight resistance at each station. “Top” refers to the 6.5 lbs. top weight. The other numbers refer to the 12.5 lbs. weight plates. Note: The actual resistance at each weight station may vary due to differences in individual weight plates, as well as friction between the cables, pulleys, and weight guides. Press Butterfly Pulley Leg Weight Arm Arm Station Lever Plates (lbs.) (lbs.) (lbs.) (lbs.) Top 1320 14 9 1 304428 23 2 46 66 44 34 3 65

Summary of the content on the page No. 20

Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-888-936-4266, Monday through Friday, 8 a.m. until 6:30 p.m. EST (excluding holidays). To help us assist you, please be prepared to give the following information: 1. The MODEL NUMBER of the product (WESY74090). ® 2. The NAME of the product (WEIDER 740 Weight System). 3. The SERIAL NUMBER of the product (see the front cover of this manual). 4. The KEY NUMBER and DESCRIPTION of the


Alternative user manuals
# User manual Category Download
1 Weider 140 User manual Home Gym 106
2 Weider 150722 User manual Home Gym 35
3 Weider 148 User manual Home Gym 35
4 Weider 500 User manual Home Gym 16
5 Weider 220 User manual Home Gym 20
6 Weider 240 TC User manual Home Gym 19
7 Weider 16.8ST User manual Home Gym 5
8 Weider 5000 User manual Home Gym 16
9 Weider 28ST User manual Home Gym 10
10 Weider 740 User manual Home Gym 35
11 Weider 15CT User manual Home Gym 13
12 Weider 831.14622.0 User manual Home Gym 14
13 Weider 2000X WESY7773.1 User manual Home Gym 25
14 Weider 831.150280 User manual Home Gym 9
15 Weider 831.150291 User manual Home Gym 4
16 Aqua Leisure FF 6910 E User manual Home Gym 1
17 Aqua Leisure FF 6910 F User manual Home Gym 1
18 Aqua Leisure FF-6915 E User manual Home Gym 1
19 Aqua Leisure Fitness FF-6905 User manual Home Gym 1
20 Aqua Leisure FF-6915 F User manual Home Gym 0