Summary of the content on the page No. 1
EPS Espresso Pod System
User’s Manual
User’s Manual
Summary of the content on the page No. 2
INDEX CHAPTER 1 - GENERAL INFORMATION................................................5 1.1. CONTENTS OF THE BOX..................................................................5 1.2. DESCRIPTION OF THE MACHINE......................................................6 1.2.1. ANTI SCALE WATER FILTER ......................................................6 1.3. DESCRIPTION OF CONTROLS ..........................................................7 1.4. MARKING AND IDENTIF
Summary of the content on the page No. 3
4.4. DISPENSING HOT WATER .............................................................18 4.5. DISPENSING STEAM .....................................................................19 4.5.1. Using steam to heat up a drink ................................................19 4.5.2. Using the steam to froth milk for Cappuccino. ...........................19 CHAPTER 5 – PRECAUTIONS WHEN USING THE MACHINE ..............21 5.1. PRECAUTIONS WHEN DISPENSING STEAM.............................
Summary of the content on the page No. 4
INTRODUCTION Congratulations on choosing a Tonino Lamborghini Espresso Pod Coffee Machine. The design of the machine was personally approved by Tonino Lamborghini towards the end of 2005 and it includes some design features taken from the early cars. Each machine uses the highest quality materials designed to make a delicious cup of coffee time and time again. This manual will guide you through setting up the machine and how to use the machine to ensure that it ma
Summary of the content on the page No. 5
CHAPTER 1 - GENERAL INFORMATION 1.1. CONTENTS OF THE BOX 1) Coffee Machine 2) 2 Spare rubber seals 3) Cleaning cloth 4) Water reservoir cover plate 5) Coffee Drip tray cover 6) Coffee Drip tray 7) Users Manual on CD Rom 2 1 3 4 5 6 7 Fig. 1 - Contents of the box Carefully remove the components from the box and keep all the packaging in the box. 5 – TONINO LAMBORGHINI EPS Use and maintenance manual – Rev.01 - 07/2006 TONINO LAMBORGHINI EPS
Summary of the content on the page No. 6
1.2. DESCRIPTION OF THE MACHINE Fig. 2 shows the assembled machine and highlights the important controls and buttons. Cup Rest Steam release knob Water reservoir Steam Switch On/Off Button Temperature Led Light Coffee Button On/Off Led Light Steam / Water dispenser Pod holder filter Drip tray Coffee Group Lever Steam Drip tray Spout Drip tray cover Fig. 2 – Description of parts 1.2.1. ANTI SCALE WATER FILTER (see Par. 6.9) Fitted at the end of the longer water pipe tha
Summary of the content on the page No. 7
1.3. DESCRIPTION OF CONTROLS On/ Off button: Push the button to turn the machine on. The red LED light next to the button will come on to indicate that the machine is on. This LED will remain illuminated at all times when the machine is on. Push the button again to switch the machine off. Hot water/ Coffee making button: Push the button to start making a cup of coffee or to release hot water through the spout (when there is no coffee pod in the machine). Push the button aga
Summary of the content on the page No. 8
Gearlever handle: Located on right hand side of machine to open and close the pod holder assembly. Pull the lever towards you to lower the pod holder assembly and the spout. This allows the coffee pod to be placed on the holder. Push the lever away from you to raise the assembly before you make a cup of coffee. Push the lever until it locks into position. You should encounter some resistance as the lever locks. After you have made a cup of coffee pull the lever towards you to
Summary of the content on the page No. 9
water reservoir cover plate, the drip tray cover or the drip trays. The manufacturer and/or the retailer will not accept responsibility for the damage or loss of any of these items if they are returned with the coffee machine. Please remember to empty the plastic reservoir before you return the machine. 1.6 LIMITS OF THE GUARANTEE The guarantee does not cover 1 Incorrect use of the machine which is designed for household/domestic use. 2 Damage caused by using the machine ou
Summary of the content on the page No. 10
1.8 SCRAPPING This product complies with EU Directive 2002/96/EC. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the appropriate collection point for recycling of electrical and electronic equipments. By ensuring this product is disposed of correctly, you will help prevent potential damage to for the environment and human health, which could be caused by inappropriate w
Summary of the content on the page No. 11
CHAPTER 2 – UNPACKING / INSTALLATION Before using the machine please carefully read these instructions. 2.1. INSTALLATION Carefully unpack the machine and check that all the parts are present (see Par. 1.1) and familiarise yourself with the controls (see Fig. 2). 2.2. POSITION OF THE MACHINE Place the machine on a flat, even surface close to a wall socket in a well-lit environment. Ensure that the machine cannot be knocked over or cause injury and is out of the reach of child
Summary of the content on the page No. 12
CHAPTER 3 – IMPORTANT SAFETY NOTICES 3.1. GENERAL SAFETY Please ensure that you read this manual and the safety notices contained in it so that you are aware of any potential danger. The manufacturer cannot be held responsible for damage/ injury to persons caused as a result of not following the safety guidelines and instructions in this manual. If you are unable to resolve an issue after studying Chapter 7 – Troubleshooting then please contact your retailer for advice.
Summary of the content on the page No. 13
3.3. DANGER – HIGH TEMPERATURES During normal operation some parts of the machine will become extremely hot. To avoid the risk of scalding please do not touch the following parts when the machine is turned on as they will be hot: 1 Coffee Spout 2 Steam Arm 3 The inside of the pod holder assembly Take particular care when putting in or taking out a coffee pod as the temperature of the metal can approach 100°C. 3.4. GENERAL INFORMATIONS & IMPORTANT SAFEGUARDS When
Summary of the content on the page No. 14
- Do not operate any appliance with a damaged cord or plug or in the event of appliance faults or damages. Return appliance to the nearest authorized service centre for examination, repair or adjustment. - The use of accessory attachments is not recommended by the appliance manufacturer and may result in fire, electric shock or personal injury. - Do not use outdoors. - Do not let the cord hang over the edge of a table or counter, or touch a hot surface. - Do not place on or
Summary of the content on the page No. 15
CHAPTER 4 – USING THE MACHINE NOTE: We would advise that you rinse the water container before it is used for the first time and that you discard the first coffee that you make when the machine is brand new. 4.1. FILLING UP THE WATER RESERVOIR Remove the silver water reservoir cover and carefully take out the 2 water pipes. Fit a scale filter (supplied with the machine) to the longer of the two pipes. Now fill the reservoir with water. The water must be at room temperature.
Summary of the content on the page No. 16
hand side of the casing and the single button on the left hand side are NOT depressed. Push the buttons in with your finger to ensure that they are not depressed. 2 Plug in the mains cable to a suitable wall socket. Turn on the wall socket. 3 Turn on the coffee machine by pressing in the on/off button which is located on the right hand side of the casing above the water button. 4 Close the pod assembly by pushing the gearlever away from you until it locks into position. 5
Summary of the content on the page No. 17
socket. Turn on the wall socket. 3. Now turn on the coffee machine by pressing in the on/off button which is located on the right hand side of the casing above the water button. The on/off button has a circle with the numeral ‘1’ inside the circle. Both red LEDs will light up. The LED light on the right hand side indicates that the machine is ‘on’ and remains lit all the time that the machine is on. The LED light on the left hand side indicates that the machine is warming up a
Summary of the content on the page No. 18
coffee. 10. Remove the cup of coffee which is now ready. 11. Pull the gearlever on the right hand side towards you to release the pod assembly and remove the used coffee pod. Each coffee pod makes a single cup of coffee. Once the machine has reached its normal operating temperature the red LED light on the left hand side of the machine will go out. After this you can use the machine to make coffee. The LED light may come back on again to indicate that the boiler is re-h
Summary of the content on the page No. 19
4.5. DISPENSING STEAM The steam arm can also be used to froth milk for capuccinos and to heat other drinks. Please see next paragraph for details. ATTENTION: Do not make steam for longer than 30-60 seconds continuosly. After steam production the boiler will re-fill with water (See recommendation in Par. 5.1). 4.5.1. Using steam to heat up a drink CAUTION: The steam arm WILL BE EXTREMELY hot and you should move it by using the plastic lug located half way down the steam
Summary of the content on the page No. 20
1. Follow the steps in Par. 4.3 to make the coffee 2. Push in the Steam button on the left hand side of the machine 3. The red LED light next to the button will come on 4. Wait until the red LED light goes off which indicated that the water temperature in the boiler has reached 125°C 5. Fill 1/3 of the receptacle you want to use to make cappuccino with milk as the volume of the milk will expand. 6. Position the container under the steam arm. 7. Immerse the steam nozzle i
