System Sensor 24ATR user manual

Summary of the content on the page No. 1

INSTALLATION AND MAINTENANCE INSTRUCTIONS
3. Remove screen assembly, pulling straight out (please Figure 5. Removal of cover and screen for cleaning:
see Figure 5).
2112/24ATR
4. Remove the sensing chamber cover.
5. Clean the sensing chamber by vacuuming or blowing
Photoelectronic Smoke Detector with
out dust and particles.
REMOVABLE
3825 Ohio Avenue, St. Charles, Illinois 60174
HOUSING
6. Replace the sensing chamber cover, aligning the arrow Fixed Heat and Integral Temp-3 Sounder 1-800-SEN

Summary of the content on the page No. 2

Figure 2. Surface mounting of 2112/24ATR smoke Mounting Wire connections are made by stripping about 1/4 inch of 2. Press and hold the recessed test switch with a 0.18 1 detector on 3 / -inch and 4-inch octagonal box: Each 2112/24ATR detector is supplied with a mounting insulation from the end of the feed wire, inserting the wire inch maximum diameter tool such as an allen wrench 2 bracket that permits the detector to be mounted: into the appropriate terminal, and tightening the screw to or smal

Summary of the content on the page No. 3

Figure 2. Surface mounting of 2112/24ATR smoke Mounting Wire connections are made by stripping about 1/4 inch of 2. Press and hold the recessed test switch with a 0.18 1 detector on 3 / -inch and 4-inch octagonal box: Each 2112/24ATR detector is supplied with a mounting insulation from the end of the feed wire, inserting the wire inch maximum diameter tool such as an allen wrench 2 bracket that permits the detector to be mounted: into the appropriate terminal, and tightening the screw to or smal

Summary of the content on the page No. 4

INSTALLATION AND MAINTENANCE INSTRUCTIONS 3. Remove screen assembly, pulling straight out (please Figure 5. Removal of cover and screen for cleaning: see Figure 5). 2112/24ATR 4. Remove the sensing chamber cover. 5. Clean the sensing chamber by vacuuming or blowing Photoelectronic Smoke Detector with out dust and particles. REMOVABLE 3825 Ohio Avenue, St. Charles, Illinois 60174 HOUSING 6. Replace the sensing chamber cover, aligning the arrow Fixed Heat and Integral Temp-3 Sounder 1-800-SEN