Summary of the content on the page No. 1
Sunbeam Remote Controlled
Tower Fan
Instruction Booklet
FA7200 90cm Remote Controlled Tower Fan
Please read these instructions carefully
and retain for future reference.
sun_7200.indd 1 8/07/2008 18:24:49
Summary of the content on the page No. 2
Contents Sunbeam’s Safety Precautions 1 Safety Precautions For Your Tower Fan 2 Locating Your Tower Fan 3 Features Of Your Sunbeam Tower Fan 4 Assembling Your Tower Fan 6 Using Your Tower Fan 8 Troubleshooting Guide 12 Care And Cleaning 12 sun_7200.indd 2 8/07/2008 18:24:57
Summary of the content on the page No. 3
Sunbeam’s Safety Precautions Sunbeam are very safety conscious when • Do not use an appliance for any purpose other designing and manufacturing consumer prod- than its intended use. ucts, but it is essential that the product user • Do not place an appliance on or near a hot gas also exercise care when using an electrical fl ame, electric element or on a heated oven. Do appliance. Listed below are precautions which not place on top of any other appliance. are essential for the safe use of an
Summary of the content on the page No. 4
Safety Precautions For Your Tower Fan • Do not use outdoors. • The fan must not be used if the guards are damaged in any way. • Do not run the cord of the fan under carpeting. Do not cover the cord with throw rugs, runners • Do not insert or allow foreign objects to enter or other fl oor coverings. Arrange the cord away any ventilation or exhaust openings as this may from traffi c areas so that it will not be tripped cause electric shock or fi re, or damage to the over. fan. • Do not use thi
Summary of the content on the page No. 5
Locating Your Tower Fan 1.Always locate your fan on a fl at level surface. 2.Your tower fan should be located in a dry, cool, well ventilated location. Keep your fan away from heat sources, corrosive gases and avoid direct sunlight. 3.Do not attempt to move your tower fan whilst it is operating. If your fan needs to be moved, please ensure that it is turned off and you use the carry handle at the rear of the fan. 3 sun_7200.indd Sec1:3 8/07/2008 18:24:57
Summary of the content on the page No. 6
Features Of Your Sunbeam Tower Fan Remote control storage When not in use, store your remote control in the handy storage compartment on the rear of the fan body. Carry handle Convenient carry handle allows you to easily carry your fan from room to room. Power button Simply press the power button to turn the unit on. Control panel The easy to read control panel allows you to quickly see what functions have been selected on your tower fan. 4 sun_7200.indd Sec1:4 8/07/2008 18:24:57
Summary of the content on the page No. 7
Remote control Adjust the fan setting, auto off or oscillation from anywhere in the room using the full function remote control. Auto Off button Fan speed button The auto off timer allows Choose from 3 speed you to set your tower fan to settings, low medium turn off after either 1, 2, 4 or high. or 8 hours. Nature and Sleep mode Oscillation When used in nature mode, the fan speed Your tower fan oscillates 70°, is randomly adjusted, giving the feeling of distributing cool air throughout a n
Summary of the content on the page No. 8
Assembling Your Tower Fan Remove the screws from beneath the tower Join the two halves of the base together 1.Using a phillips head screwdriver, remove the 1.Feed the cord between the two halves of the 4 screws from underneath the tower. base. 2.Put the screws aside. You will need them to 2.Clip the two halves of the base together, secure the base. ensuring the cord remains within the channel formed when the two halves come together. 6 sun_7200.indd Sec1:6 8/07/2008 18:24:57
Summary of the content on the page No. 9
Assembling Your Tower Fan (continued) Lower the tower onto the base Screw the tower to the base 1.Align the tower and the base as shown. 1.Use the 4 screws you put aside earlier to secure the tower to the base. 2.Push the tower down onto the base until it is fi rmly held into position. 2.Clip the power cord into the semi circular slot at the edge of the base. Ensure that the cord fi ts neatly into the channel. 3.Stand the fan upright. It is now ready for use. 7 sun_7200.indd Sec1:7 8/07/20
Summary of the content on the page No. 10
Using Your Tower Fan Switching the fan on Selecting a fan speed setting 1.Place the fan on a fl at level surface. Your Sunbeam tower fan has 3 speed settings as follows: 2.Insert the plug into a 230/240V power outlet and turn the power on. • low speed “1” light illuminates • medium speed “2” light illuminates 3.Press the power button . • high speed “3” light illuminates 4.Press the fan speed button to select To select a fan speed, simply press the fan low, medium or high depending on your
Summary of the content on the page No. 11
Using Your Tower Fan (continued) Using the remote control Changing the batteries 1.Remove the remote control from its compart- 1.Slide the rear cover off the remote control ment at the rear of the tower as shown. unit. 2.Point the remote towards the control panel 2.Replace the spent batteries with 2 fresh AAA on the front of the tower to operate. batteries as shown. 3.Replace the rear cover. 9 sun_7200.indd Sec1:9 8/07/2008 18:24:58
Summary of the content on the page No. 12
Using Your Tower Fan (continued) Using the oscillation function Using the auto off timer The 70 degree oscillation function can be The auto off timer automatically switches the used on any setting. fan off after a preset number of hours. 1.Turn the unit on and select any fan speed. To activate this feature, simply press the auto 2.Press the button on the tower or the off button on the tower or on the remote remote. The fan will begin to oscillate from control unit. side to side. 1.Press the
Summary of the content on the page No. 13
Using Your Tower Fan (continued) Nature mode Sleep mode Nature mode provides an extra level of Sleep mode is identical to Nature mode with comfort by simulating the natural rise and fall the added advantage that the highest fan of the wind over time. You can use this mode speed gradually decreases over time. This on any fan speed setting. allows you to turn the fan on a high speed setting last thing at night, knowing that by To use Nature mode: the time you are asleep, the fan has switched
Summary of the content on the page No. 14
Troubleshooting Guide If your tower fan fails to operate check the If your remote control fails to operate check following: the following: • Make sure the electrical outlet or circuit • Ensure that you point the remote towards the breaker is working. front of the fan. • Check for obstructions around the air intake • Check that the batteries are not worn. grill. Replace if necessary. Care And Cleaning Ensure that your fan is switched off and • Take care that excessive dust does not build disc
Summary of the content on the page No. 15
2 Year Replacement Guarantee We are so confi dent of the quality of our product, should this appliance develop any malfunction within 2 years of purchase (3 Months commercial use) due to faulty materials or manufacture, we will replace it for you absolutely free. Should you experience any diffi culties Sunbeam Service Centres with your appliance, please phone our Sunbeam has established a network of free call customer service line for advice authorised service centres throughout on 1300 88
Summary of the content on the page No. 16
Consumer Hotline In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered Trademark of Sunbeam. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leafl et. © Copyright Sunbeam Corporation Limited 2008. ABN 45 000 006 771 Sunbeam Corporation is a division of GUD Holdings Ltd. 0708 sun_7200.indd Sec1:14 8/07/2008 18:24:59
