Summary of the content on the page No. 1
Cord/ Cordless Steam Iron
Operating Instructions
Model No. ST-2000
Safety Information
PRECAUTIONS-------------------------------------------------------------------------- 2
IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------ 3,4
Operation
COMPONENTS IDENTIFICATION-------------------------------------------------- 5
HELPFUL IRONING TIPS ------------------------------------------------------------- 6
HOW TO FILL ----------------------------
Summary of the content on the page No. 2
SAFE USE OF THE IRON Your safety and the safety of others are very important We have provided important safety messages in this manual. Always read and obey all safety messages. This is the safety alert symbol. It is used to alert you to potential hazards that can kill or injure you and others. The safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION”. These words mean You can be seriously injured if you don’t follow WARNING instruc
Summary of the content on the page No. 3
READ ALL INSTRUCTIONS BEFORE USING THE IRON 1. Use the iron only for its intended purpose, for ironing fabrics on board. 2. To protect against burns or injury to persons, do not iron or steam fabrics while being worn on the body. 3. The iron should always be turned “OFF” before plugging or unplugging from outlet. Never yank cord to disconnect from outlet, instead, grasp plug and pull to disconnect. 4. Do not allow cord to touch hot surface. Allow the iron to cool completely be
Summary of the content on the page No. 4
SPECIAL INSTRUCTIONS To reduce the risk of electric shock or fire: WARNING 1. Do not operate another high wattage appliance on the same circuit, to avoid a circuit overload. 2. If an extension cord is absolutely necessary, use a cord rated a minimum of 10 amperes. • Cord rated for less amperage may overheat, and should not be used. Care should be taken to arrange the cord so that it can not be accidentally pulled or tripped. To reduce risk of personal injury an
Summary of the content on the page No. 5
COMPONENTS IDENTIFICATION 5
Summary of the content on the page No. 6
READ THIS INSTRUCTION BOOK THOROUGHLY BEFORE USING YOUR SMARTEK IRON TO BECOME FAMILIAR WITH THE IRON FEATURES. HELPFUL IRONING TIPS The Temperature Selector Dial of the Smartek iron has dots. The dots are symbols for 3 temperature ranges: Low Temperature Medium Temperature High Temperature Some fabrics are labeled with these dots as a guide for selecting the proper ironing temperature setting. As a guide to the Fabric Care Symbols, the following symbols are print
Summary of the content on the page No. 7
HOW TO FILL WITH WATER Make sure the iron is turned off and the AC Power Cord is unplugged from the electrical outlet. The iron can be filled with the Detachable Water Tank in place or removed. Set the Cord Switch to “Cordless” Remove the iron from the stand. 1. When the iron is sitting up on the Heel Rest, press the Tank Lock/Release Button down and the tank will be released. 2. Grasp the tank and lift it off the iron. 3. Open the Water Fill Opening and fill the Tank up to the “MAX”
Summary of the content on the page No. 8
HOW TO USE AS A STEAM IRON 1. Fill the iron as described in “HOW TO FILL WITH WATER”. 2. Position the iron vertically and turn the Temperature Control Dial to the steam position. 3. Plug the AC Cord into the electrical outlet. 4. Set the Temperature Control Dial to the steam position. 5. Preheat the iron until the indicator light goes out, usually about 1-2 minutes. Now steam ironing can begin. HOW TO USE THE SPRAY Before using the spray feature, check the fabric label for
Summary of the content on the page No. 9
Cord Ironing 1. Turn the cord switch to “Cord” 2. Lift the iron (with cord) from the stand . • NOTE: The indication light will turn on and off from time to time during the cord ironing. Cordless Ironing 1. Turn the Cord to switch to “Cordless” 2. Lift the iron (without the cord) from the stand. To assure that the iron reaches the present temperature: 1. Place the iron in its suitable position on the stand for heating. 2. Do not lift the iron until the indication light tur
Summary of the content on the page No. 10
AFTER EACH USE 1. Turn the iron off and unplug. 2. Empty the iron immediately after using. Do not store the iron with water in it. 3. Wait until the iron has cooled before storing it, and always set it on the Heel Rest to protect the soleplate from scratches, corrosion or stains. 4. After letting iron cool completely, store the iron vertically in a safe place. Please see Important Safety Instructions. OUTSIDE SURFACE OF THE IRON After unplugging and cooling the iron, simply wipe
Summary of the content on the page No. 11
FABRIC IRONING CHART 1. Check fabric for specific ironing instructions, always follow manufacturer’s instructions. 2. Iron blended fabrics at setting for lower-temperature fiber or for the highest –percentage fibers 3. Use caution, some synthetics may melt at high temperature. Temperature Fabric Ironing Recommendations Selector Setting *Nylon Dry iron on wrong side, or use a *Silk, press cloth on top of fabric. Don’t *Acrylic, sprinkle water directly on fabric to *Su
Summary of the content on the page No. 12
Distributed By Smartek USA Inc., Brooklyn, NY 11206 www.smartekusa.com 12
