Simplicity 1280M user manual

User manual for the device Simplicity 1280M

Device: Simplicity 1280M
Category: Snow Blower
Manufacturer: Simplicity
Size: 1.85 MB
Added : 6/1/2013
Number of pages: 42
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Simplicity 1280M. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Simplicity 1280M.

For your convenience

If looking through the Simplicity 1280M user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Simplicity 1280M on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Simplicity 1280M to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Simplicity 1280M User manual - Online PDF
Advertisement
« Page 1 of 42 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Simplicity 1280M but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Simplicity 1280M. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Parts Manual
Large Frame
Walk-Behind Snowthrowers
9.5HP Snowthrowers
Mfg. No. Description
1694589 9560E, 9.5HP Snowthrower
1694597 9560M, 9.5HP Snowthrower (CE)
10HP Snowthrowers
Mfg. No. Description
1694590 1060E, 10HP Snowthrower
1694598 1060M, 10HP Snowthrower (CE)
11HP Snowthrowers
Mfg. No. Description
1694591 1170E, 11HP Snowthrower
1694599 1170M, 11HP Snowthrower (CE)
12HP Snowthrowers
Mfg. No. Description
1694592 1280E, 12HP Snowthrower
1694600 1280M, 12HP Snowthrower (CE)
13HP Snowthrow

Summary of the content on the page No. 2

Summary of the content on the page No. 3

Table Of Contents PRODUCT COMPONENTS PAGES Handles and Controls Group - 1060, 1170, 1280 & 1390 Models ...................................................................... 4 Handles and Controls Group - 9560 Models ....................................................................................................... 8 Engine and Frame Group with Power Boost ....................................................................................................... 12 Engine and Frame Group without

Summary of the content on the page No. 4

Handles and Controls Group - 1060, 1170, 1280 & 1390 Models 986724 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 10 12 2 1 Linkage adjustment for traction and auger drive with power boost: with drive levers engaged, the bottom end of 8 lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref. 39 & 68). 9 4 5 13 7 14 6 15 80 81 17 16 82 3 79 4 18 19 74 78 76 4 20 77 12 22 4 9 6 23 4 24 69 4 5 59 12 21 71 75 74 73 28 25 41 42 36 26 29 30 37 4

Summary of the content on the page No. 5

Handles and Controls Group - 1060, 1170, 1280 & 1390 Models REF NO PART NO. QTY. DESCRIPTION 1 1727128 1 HANDLE, Clutch R.H. 2 1668608 2 GRIP, Handle Clutch, Black 3 1928732 1 CAPSCREW, Hex Washer Head Taptite #10-24 x 1 4 1668185 5 BUSHING, 1/2 ID x 3/4 OD x 1/4, Nylon 5 1725205A 2 LEVER & TUBE ASSEMBLY, Clutch 6 1960471 4 CAPSCREW, Hex Washer Head Taptite #12-24 x 1 7 1705899 1 GUIDE, Control 8 1726422 2 RIVET, Pop (1280 & 1390 Models Only) 9 1726317 2 GRIP, Black Soft 1" (9560

Summary of the content on the page No. 6

Handles and Controls Group - 1060, 1170, 1280 & 1390 Models 986724 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 10 12 2 1 Linkage adjustment for traction and auger drive with power boost: with drive levers engaged, the bottom end of 8 lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref. 39 & 68). 9 4 5 13 7 14 6 15 80 81 17 16 82 3 79 4 18 19 74 78 76 4 20 77 12 22 4 9 6 23 4 24 69 4 5 59 12 21 71 75 74 73 28 25 41 42 36 26 29 30 37 4

Summary of the content on the page No. 7

Handles and Controls Group - 1060, 1170, 1280 & 1390 Models REF NO PART NO. QTY. DESCRIPTION 44 1715658 1 ROD, Chute Control, 27" Long (9560, 1060, 1170 & 1280 Models Only) 45 1718793 1 SUPPORT, Gear (9560, 1060, 1170 & 1280 Models Only) 46 1718593 2 GEAR, Powered Metal (9560, 1060, 1170 & 1280 Models Only) 47 1918452 1 PIN, Cotter 1/8 x 1 (9560, 1060, 1170 & 1280 Models Only) 48 2816168 2 PIN, Spring 1/8 x 3/4 (9560, 1060, 1170 & 1280 Models Only) 49 1725283 1 ROD, Chute Worm, 18 Long

Summary of the content on the page No. 8

Handles and Controls Group - 9560 Models 986728 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 8 9 Apply adhesive to secure grips. 10 11 12 6 Must slide freely in dash assembly (Ref 13). 7 Apply lubricant as required. 17 18 16 4 15 19 Insert shift rod (Ref. 58) 5 14 into outter hole of Ref. 64. 13 65 3 63 64 66 54 21 35 67 56 20 1 12 54 22 62 63 23 2 61 58 68 56 57 60 28 25 16 24 59 26 29 27 Shift rod assembly (Ref. 61) 57 must pivot freely on pivot blocks,

Summary of the content on the page No. 9

Handles and Controls Group - 9560 Models REF NO PART NO. QTY. DESCRIPTION 1 1726833 1 CABLE AND SPRING ASSEMBLY, R.H. Auger 2 1701996 1 SPRING, Torsion 3 1727087A 1 HANDLE, Tube, R.H. 4 1922127 1 CAPSCREW, Hex Head, 5/16-18 x 1-3/4 G5 5 1921221 3 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 6 1960671 2 SCREW, Pan Head Torx, 1/4-20 x 3/4, Thread Cutting 7 1715654 2 SPACER, 1/4ID x 25/64OD x 11/64LG 8 1922837 2 CAPSCREW, Hex Head, 1/4-20 x 1-1/2 G5 9 1722638 1 HANDLE, Clutch R.H. 10 17

Summary of the content on the page No. 10

Handles and Controls Group - 9560 Models 986728 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 8 9 Apply adhesive to secure grips. 10 11 12 6 Must slide freely in dash assembly (Ref 13). 7 Apply lubricant as required. 17 18 16 4 15 19 Insert shift rod (Ref. 58) 5 14 into outter hole of Ref. 64. 13 65 3 63 64 66 54 21 35 67 56 20 1 12 54 22 62 63 23 2 61 58 68 56 57 60 28 25 16 24 59 26 29 27 Shift rod assembly (Ref. 61) 57 must pivot freely on pivot blocks,

Summary of the content on the page No. 11

Handles and Controls Group - 9560 Models REF NO PART NO. QTY. DESCRIPTION 45 1960294 2 NUT, Hex Flange, 1/4-20, Whiz Lock Small 46 1611911 1 SUPPORT, Worm 47 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4 G5 48 1960684 1 NUT, Hex Keps, 5/16-18, Conical Washer 49 2816168 2 PIN, Spring 1/8 x 3/4 50 1668186 1 WORM, Chute, L.H. 51 1725283 1 ROD, 3/8" Diameter, Chute Worm E-Coat 52 1718593 2 GEAR, Powdered Metal, Metafusion 53 1918452 1 PIN, Cotter 1/4 x 1 54 1722460 1 PIN, Quick 55 16662

Summary of the content on the page No. 12

Engine and Frame Group with Power Boost 986732 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 17 Position idler pulley (Ref. 14) 21 9 at center of slot in clutch arm (Ref. 10). 19 14 15 20 Hook one end of spring (Ref. 16) 18 over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 13 22 23 11 16 24 8 12 10 25 Long hub of idler 26 35 pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 34 29 27 8 33 14 28 32 14 7 36 2 6 31 5 37 38

Summary of the content on the page No. 13

Engine and Frame Group with Power Boost REF NO PART NO. QTY. DESCRIPTION 1 1700415 1 V-BELT, 3L (Used on all models Except 1390 Models) 1 1672732 1 V-BELT, 3L (Used Only on 1390 Models) 2 1928731 1 NUT, Hex, Toplock, Jam, 3/8-16 3 1668477 1 PULLEY, Idler 4 1960647 1 SCREW, Hex Head, 3/8-16 x 1-1/2 5 1665994 1 PIN, Flat Head Drilled 6 1703046A 2 ARM, Idler, 5-3/4 LG 7 1727149 1 SPRING, Extension 8 1722460 1 PIN, Quick 9 1676460 2 V-BELT, HA (Used on all models Except 1390 Models

Summary of the content on the page No. 14

Engine and Frame Group with Power Boost 986732 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 17 Position idler pulley (Ref. 14) 21 9 at center of slot in clutch arm (Ref. 10). 19 14 15 20 Hook one end of spring (Ref. 16) 18 over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 13 22 23 11 16 24 8 12 10 25 Long hub of idler 26 35 pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 34 29 27 8 33 14 28 32 14 7 36 2 6 31 5 37 38

Summary of the content on the page No. 15

Engine and Frame Group with Power Boost REF NO PART NO. QTY. DESCRIPTION 42 1727033 1 SCREW, Muffler Deflector 43 1727032 3 DEFLECTOR, Rain Guard, B&S Snow Muffler 44 2831277 3 NUT, Hex Flange, 5/16-18, Whiz Lock Small 45 1725326C 1 SUPPORT, Engine Riser (Used on all models Except 1390 Models) 46 1935159 1 CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 2-1/4 (Used on all models Except 1390 Models) 46 1921221 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 (Used Only on 1390 Models) 47 2860551 4

Summary of the content on the page No. 16

Engine and Frame Group without Power Boost 986730 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 17 Position idler pulley (Ref. 14) 21 9 at center of slot in clutch arm (Ref. 10). 19 14 15 20 Hook one end of spring (Ref. 16) 18 over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 13 22 23 11 16 24 8 12 10 25 Long hub of idler 26 pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 31 28 27 8 7 32 2 6 30 5 33 34 29 Hook one end

Summary of the content on the page No. 17

Engine and Frame Group without Power Boost REF NO PART NO. QTY. DESCRIPTION 1 1700415 1 V-BELT, 3L (Used on all models Except 1390 Models) 1 1672732 1 V-BELT, 3L (Used Only on 1390 Models) 2 1928731 1 NUT, Hex, Toplock, Jam, 3/8-16 3 1668477 1 PULLEY, Idler 4 1960647 1 SCREW, Hex Head, 3/8-16 x 1-1/2 5 1665994 1 PIN, Flat Head Drilled 6 1703046A 2 ARM, Idler, 5-3/4 LG 7 1727149 1 SPRING, Extension 8 1722460 1 PIN, Quick 9 1725416 2 V-BELT, HA (Used on all models Except 1390 Mod

Summary of the content on the page No. 18

Engine and Frame Group without Power Boost 986730 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 17 Position idler pulley (Ref. 14) 21 9 at center of slot in clutch arm (Ref. 10). 19 14 15 20 Hook one end of spring (Ref. 16) 18 over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 13 22 23 11 16 24 8 12 10 25 Long hub of idler 26 pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 31 28 27 8 7 32 2 6 30 5 33 34 29 Hook one end

Summary of the content on the page No. 19

Engine and Frame Group without Power Boost REF NO PART NO. QTY. DESCRIPTION 42 1935159 1 CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 2-1/4 (Used on all models Except 1390 Models) 42 1921221 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 (Used only on 1390 Models) 43 2860551 4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 2-1/2 (Used on all models Except 1390 Models) 43 2822127 3 CAPSCREW, Hex Head 5/16-18 x 1-3/4 G5 (Used only on 1390 Models) 44 1668174 1 STOP, Belt 45 1919326 2 WASHER, 5/16

Summary of the content on the page No. 20

Auger and Impeller Group 985466 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. End of hub to be flush with end of rolled down shaft (Ref. 9). 1 4 2 Torque to 30 -34 ft-lbs. 40 - 46 Nm. 5 10 7 6 2 16 14 10 Torque to 17 18-21 ft-lbs. 3 10 24 - 28 Nm. 9 8 11 18 12 Impeller to be positioned 19 against bearing before 13 tightening set screw. 15 6 20 22 Marked side of worm 21 gear must contact against 18 left thrust washer to assure 23 proper gear mesh. Torque to


Alternative user manuals
# User manual Category Download
1 Simplicity 09A4130203E1 User manual Snow Blower 2
2 Simplicity 1010 User manual Snow Blower 4
3 Simplicity 1009 User manual Snow Blower 4
4 Simplicity 10530L User manual Snow Blower 12
5 Simplicity 105308E User manual Snow Blower 1
6 Simplicity 1060 User manual Snow Blower 2
7 Simplicity 10.5 User manual Snow Blower 1
8 Simplicity 1080S User manual Snow Blower 20
9 Simplicity 10560 User manual Snow Blower 1
10 Simplicity 10528 User manual Snow Blower 1
11 Simplicity 1060M User manual Snow Blower 0
12 Simplicity 1070 User manual Snow Blower 2
13 Simplicity 1060E User manual Snow Blower 3
14 Simplicity 11532 User manual Snow Blower 4
15 Simplicity 11570 User manual Snow Blower 4
16 Agri-Fab 45-0402 User manual Snow Blower 2
17 Agri-Fab 45-0418 ATV User manual Snow Blower 1
18 Agri-Fab 45-0418 User manual Snow Blower 1
19 Alliance Laundry Systems DRYING TUMBLERS 70269501R3 User manual Snow Blower 2
20 Ariens 924 SNO-THRO 924109 User manual Snow Blower 60