Summary of the content on the page No. 1
Parts Manual
Large Frame
Walk-Behind Snowthrowers
9.5HP Snowthrowers
Mfg. No. Description
1694589 9560E, 9.5HP Snowthrower
1694597 9560M, 9.5HP Snowthrower (CE)
10HP Snowthrowers
Mfg. No. Description
1694590 1060E, 10HP Snowthrower
1694598 1060M, 10HP Snowthrower (CE)
11HP Snowthrowers
Mfg. No. Description
1694591 1170E, 11HP Snowthrower
1694599 1170M, 11HP Snowthrower (CE)
12HP Snowthrowers
Mfg. No. Description
1694592 1280E, 12HP Snowthrower
1694600 1280M, 12HP Snowthrower (CE)
13HP Snowthrow
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Table Of Contents PRODUCT COMPONENTS PAGES Handles and Controls Group - 1060, 1170, 1280 & 1390 Models ...................................................................... 4 Handles and Controls Group - 9560 Models ....................................................................................................... 8 Engine and Frame Group with Power Boost ....................................................................................................... 12 Engine and Frame Group without
Summary of the content on the page No. 4
Handles and Controls Group - 1060, 1170, 1280 & 1390 Models 986724 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 10 12 2 1 Linkage adjustment for traction and auger drive with power boost: with drive levers engaged, the bottom end of 8 lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref. 39 & 68). 9 4 5 13 7 14 6 15 80 81 17 16 82 3 79 4 18 19 74 78 76 4 20 77 12 22 4 9 6 23 4 24 69 4 5 59 12 21 71 75 74 73 28 25 41 42 36 26 29 30 37 4
Summary of the content on the page No. 5
Handles and Controls Group - 1060, 1170, 1280 & 1390 Models REF NO PART NO. QTY. DESCRIPTION 1 1727128 1 HANDLE, Clutch R.H. 2 1668608 2 GRIP, Handle Clutch, Black 3 1928732 1 CAPSCREW, Hex Washer Head Taptite #10-24 x 1 4 1668185 5 BUSHING, 1/2 ID x 3/4 OD x 1/4, Nylon 5 1725205A 2 LEVER & TUBE ASSEMBLY, Clutch 6 1960471 4 CAPSCREW, Hex Washer Head Taptite #12-24 x 1 7 1705899 1 GUIDE, Control 8 1726422 2 RIVET, Pop (1280 & 1390 Models Only) 9 1726317 2 GRIP, Black Soft 1" (9560
Summary of the content on the page No. 6
Handles and Controls Group - 1060, 1170, 1280 & 1390 Models 986724 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 10 12 2 1 Linkage adjustment for traction and auger drive with power boost: with drive levers engaged, the bottom end of 8 lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref. 39 & 68). 9 4 5 13 7 14 6 15 80 81 17 16 82 3 79 4 18 19 74 78 76 4 20 77 12 22 4 9 6 23 4 24 69 4 5 59 12 21 71 75 74 73 28 25 41 42 36 26 29 30 37 4
Summary of the content on the page No. 7
Handles and Controls Group - 1060, 1170, 1280 & 1390 Models REF NO PART NO. QTY. DESCRIPTION 44 1715658 1 ROD, Chute Control, 27" Long (9560, 1060, 1170 & 1280 Models Only) 45 1718793 1 SUPPORT, Gear (9560, 1060, 1170 & 1280 Models Only) 46 1718593 2 GEAR, Powered Metal (9560, 1060, 1170 & 1280 Models Only) 47 1918452 1 PIN, Cotter 1/8 x 1 (9560, 1060, 1170 & 1280 Models Only) 48 2816168 2 PIN, Spring 1/8 x 3/4 (9560, 1060, 1170 & 1280 Models Only) 49 1725283 1 ROD, Chute Worm, 18 Long
Summary of the content on the page No. 8
Handles and Controls Group - 9560 Models 986728 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 8 9 Apply adhesive to secure grips. 10 11 12 6 Must slide freely in dash assembly (Ref 13). 7 Apply lubricant as required. 17 18 16 4 15 19 Insert shift rod (Ref. 58) 5 14 into outter hole of Ref. 64. 13 65 3 63 64 66 54 21 35 67 56 20 1 12 54 22 62 63 23 2 61 58 68 56 57 60 28 25 16 24 59 26 29 27 Shift rod assembly (Ref. 61) 57 must pivot freely on pivot blocks,
Summary of the content on the page No. 9
Handles and Controls Group - 9560 Models REF NO PART NO. QTY. DESCRIPTION 1 1726833 1 CABLE AND SPRING ASSEMBLY, R.H. Auger 2 1701996 1 SPRING, Torsion 3 1727087A 1 HANDLE, Tube, R.H. 4 1922127 1 CAPSCREW, Hex Head, 5/16-18 x 1-3/4 G5 5 1921221 3 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 6 1960671 2 SCREW, Pan Head Torx, 1/4-20 x 3/4, Thread Cutting 7 1715654 2 SPACER, 1/4ID x 25/64OD x 11/64LG 8 1922837 2 CAPSCREW, Hex Head, 1/4-20 x 1-1/2 G5 9 1722638 1 HANDLE, Clutch R.H. 10 17
Summary of the content on the page No. 10
Handles and Controls Group - 9560 Models 986728 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 8 9 Apply adhesive to secure grips. 10 11 12 6 Must slide freely in dash assembly (Ref 13). 7 Apply lubricant as required. 17 18 16 4 15 19 Insert shift rod (Ref. 58) 5 14 into outter hole of Ref. 64. 13 65 3 63 64 66 54 21 35 67 56 20 1 12 54 22 62 63 23 2 61 58 68 56 57 60 28 25 16 24 59 26 29 27 Shift rod assembly (Ref. 61) 57 must pivot freely on pivot blocks,
Summary of the content on the page No. 11
Handles and Controls Group - 9560 Models REF NO PART NO. QTY. DESCRIPTION 45 1960294 2 NUT, Hex Flange, 1/4-20, Whiz Lock Small 46 1611911 1 SUPPORT, Worm 47 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4 G5 48 1960684 1 NUT, Hex Keps, 5/16-18, Conical Washer 49 2816168 2 PIN, Spring 1/8 x 3/4 50 1668186 1 WORM, Chute, L.H. 51 1725283 1 ROD, 3/8" Diameter, Chute Worm E-Coat 52 1718593 2 GEAR, Powdered Metal, Metafusion 53 1918452 1 PIN, Cotter 1/4 x 1 54 1722460 1 PIN, Quick 55 16662
Summary of the content on the page No. 12
Engine and Frame Group with Power Boost 986732 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 17 Position idler pulley (Ref. 14) 21 9 at center of slot in clutch arm (Ref. 10). 19 14 15 20 Hook one end of spring (Ref. 16) 18 over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 13 22 23 11 16 24 8 12 10 25 Long hub of idler 26 35 pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 34 29 27 8 33 14 28 32 14 7 36 2 6 31 5 37 38
Summary of the content on the page No. 13
Engine and Frame Group with Power Boost REF NO PART NO. QTY. DESCRIPTION 1 1700415 1 V-BELT, 3L (Used on all models Except 1390 Models) 1 1672732 1 V-BELT, 3L (Used Only on 1390 Models) 2 1928731 1 NUT, Hex, Toplock, Jam, 3/8-16 3 1668477 1 PULLEY, Idler 4 1960647 1 SCREW, Hex Head, 3/8-16 x 1-1/2 5 1665994 1 PIN, Flat Head Drilled 6 1703046A 2 ARM, Idler, 5-3/4 LG 7 1727149 1 SPRING, Extension 8 1722460 1 PIN, Quick 9 1676460 2 V-BELT, HA (Used on all models Except 1390 Models
Summary of the content on the page No. 14
Engine and Frame Group with Power Boost 986732 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 17 Position idler pulley (Ref. 14) 21 9 at center of slot in clutch arm (Ref. 10). 19 14 15 20 Hook one end of spring (Ref. 16) 18 over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 13 22 23 11 16 24 8 12 10 25 Long hub of idler 26 35 pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 34 29 27 8 33 14 28 32 14 7 36 2 6 31 5 37 38
Summary of the content on the page No. 15
Engine and Frame Group with Power Boost REF NO PART NO. QTY. DESCRIPTION 42 1727033 1 SCREW, Muffler Deflector 43 1727032 3 DEFLECTOR, Rain Guard, B&S Snow Muffler 44 2831277 3 NUT, Hex Flange, 5/16-18, Whiz Lock Small 45 1725326C 1 SUPPORT, Engine Riser (Used on all models Except 1390 Models) 46 1935159 1 CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 2-1/4 (Used on all models Except 1390 Models) 46 1921221 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 (Used Only on 1390 Models) 47 2860551 4
Summary of the content on the page No. 16
Engine and Frame Group without Power Boost 986730 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 17 Position idler pulley (Ref. 14) 21 9 at center of slot in clutch arm (Ref. 10). 19 14 15 20 Hook one end of spring (Ref. 16) 18 over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 13 22 23 11 16 24 8 12 10 25 Long hub of idler 26 pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 31 28 27 8 7 32 2 6 30 5 33 34 29 Hook one end
Summary of the content on the page No. 17
Engine and Frame Group without Power Boost REF NO PART NO. QTY. DESCRIPTION 1 1700415 1 V-BELT, 3L (Used on all models Except 1390 Models) 1 1672732 1 V-BELT, 3L (Used Only on 1390 Models) 2 1928731 1 NUT, Hex, Toplock, Jam, 3/8-16 3 1668477 1 PULLEY, Idler 4 1960647 1 SCREW, Hex Head, 3/8-16 x 1-1/2 5 1665994 1 PIN, Flat Head Drilled 6 1703046A 2 ARM, Idler, 5-3/4 LG 7 1727149 1 SPRING, Extension 8 1722460 1 PIN, Quick 9 1725416 2 V-BELT, HA (Used on all models Except 1390 Mod
Summary of the content on the page No. 18
Engine and Frame Group without Power Boost 986730 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 17 Position idler pulley (Ref. 14) 21 9 at center of slot in clutch arm (Ref. 10). 19 14 15 20 Hook one end of spring (Ref. 16) 18 over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 13 22 23 11 16 24 8 12 10 25 Long hub of idler 26 pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 31 28 27 8 7 32 2 6 30 5 33 34 29 Hook one end
Summary of the content on the page No. 19
Engine and Frame Group without Power Boost REF NO PART NO. QTY. DESCRIPTION 42 1935159 1 CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 2-1/4 (Used on all models Except 1390 Models) 42 1921221 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 (Used only on 1390 Models) 43 2860551 4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 2-1/2 (Used on all models Except 1390 Models) 43 2822127 3 CAPSCREW, Hex Head 5/16-18 x 1-3/4 G5 (Used only on 1390 Models) 44 1668174 1 STOP, Belt 45 1919326 2 WASHER, 5/16
Summary of the content on the page No. 20
Auger and Impeller Group 985466 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. End of hub to be flush with end of rolled down shaft (Ref. 9). 1 4 2 Torque to 30 -34 ft-lbs. 40 - 46 Nm. 5 10 7 6 2 16 14 10 Torque to 17 18-21 ft-lbs. 3 10 24 - 28 Nm. 9 8 11 18 12 Impeller to be positioned 19 against bearing before 13 tightening set screw. 15 6 20 22 Marked side of worm 21 gear must contact against 18 left thrust washer to assure 23 proper gear mesh. Torque to
