Summary of the content on the page No. 1
IP-Module
IP-Module CFVA-IP
IP-Module CVVA-IP
User manual
Issue 07/2005
Fire Safety & Security Products
Siemens Building Technologies
Summary of the content on the page No. 2
Equipment availability and technical specifications subject to change without notice. Data and design subject to change without notice. Supply subject to availability. © Copyright by Siemens Building Technologies AG Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger anerkennt diese Rechte und wird dieses Dokument nicht ohne unsere vorgängige schriftliche Ermächtigung ganz oder teilweise Dritten zugänglich machen oder außerhalb de
Summary of the content on the page No. 3
Contents 1 Introduction .............................................................................................5 2 General Safety Precautions ...................................................................6 3 Ordering data...........................................................................................7 3.1 Ordering data for IP-Module CFVA-IP ......................................................7 3.2 Ordering data for IP-Module CVVA-IP.................................
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Introduction 1 Introduction Thank you for deciding to buy this IP-Module. We wish you every success in using this product. If you have any questions about the product, please contact your local SIEMENS branch office. This IP-Module allows you to display live video images from a dome camera on your PC via an internet connection. The live video images are transmitted via a TCP/IP based network and displayed using an http browser (e.g. Netscape 7.0, Mozilla or Internet Explorer). The imag
Summary of the content on the page No. 6
General Safety Precautions 2 General Safety Precautions Read these instructions carefully before connecting the camera and the IP- Module in order to avoid damage caused by improper installation or use. Installation may be done only by authorized personnel according to the local safety regulations. Operate the camera and the IP-Module only with the designated voltage. Follow the safety instructions for the camera and for the IP-Module. Never use the camera and the IP-Module for pur
Summary of the content on the page No. 7
Ordering data 3 Ordering data 3.1 Ordering data for IP-Module CFVA-IP Type Item no. Description Weight CFVA-IP 2GF1086-8AL IP-Module for 12 V DC / 24 0.40 kg V DC indoor fix dome camera Extra accessories, not included in the standard supply! PSU230-12 2GF1800-8BE 12 V DC camera power 0.12 kg supply CAPA2410-P230 2GF1800-8BJ 24 V AC camera power 0.30 kg supply 3.2 Ordering data for IP-Module CVVA-IP Type Item no. Description Weight CVVA-IP 2GF1185-8AG IP-Module for 12
Summary of the content on the page No. 8
Norms and Directives 4 Norms and Directives EU Directive The following applies for the device described in this manual: The product satisfies the requirements of the EU Electromagnetic Compatibility Directive 89/336/EEC. The EU declarations of conformity can be made available to the relevant authorities by: Siemens Building Technologies Fire & Security Products GmbH & Co. oHG Siemensallee 84 D-76187 Karlsruhe Application in accordance with the Electromagnetic Compatibility Directi
Summary of the content on the page No. 9
Technical data 5 Technical data 5.1 Technical data for IP-Module CFVA-IP Electrical supply 12 V DC/24 V AC Power requirement max. 6.0 W Operating temperature range -10 – +45 °C, max. relative humidity 90% Storage temperature range -20 – +60 °C Dimensions (H x Ø) 35.5 x 140 mm Weight 400 g Material Aluminum System requirements All systems, which feature TCP/IP network functions and provide an http browser (Microsoft Internet Explorer from version 5.5 with Java plug-in or Mozilla or
Summary of the content on the page No. 10
Technical data 5.2 Technical data for IP-Module CVVA-IP Electrical supply 12 V DC/24 V AC Power requirement max. 6.0 W Operating temperature range -10 – +50 °C, max. relative humidity 90% Storage temperature range -20 – +60 °C, max. relative humidity 70% Dimensions (H x Ø) 48 x 135 mm Weight 620 g Material Aluminum IP rating IP66 System requirements All systems, which feature TCP/IP network functions and provide an http browser (Microsoft Internet Explorer from version 5.5 with J
Summary of the content on the page No. 11
Installing the IP-Module 6 Installing the IP-Module 6.1 Installing IP-Module type CFVA-IP Fig. 1 Exploded view of IP-Module CFVA-IP IP-Module fixing 1. Use the drilling template to drill two holes in the ceiling/wall and insert the wall plugs. 2. Mount the IP-Module to the ceiling/wall. 3. Connect the BNC cable (12) to the connector socket (4) in the IP-Module. Installation and connection of the dome camera 4. Connect the video output from the dome camera to the BNC cable video input
Summary of the content on the page No. 12
Installing the IP-Module 7. Place the camera body on the IP-Module and screw both units together using the two screws supplied. 8. Connect the LAN cable to the RJ45 socket (7). 9. Connect the (12 V DC / 24 V AC) electrical supply (8). Ensure correct polarity if using a 12 V DC supply, as incorrect connection may WARNING damage the dome camera or cause the unit to operate abnormally. 10. Establish communication with the device for the first time. See section 7: Establishing ini
Summary of the content on the page No. 13
Installing the IP-Module IP-Module fixing The IP-Module features two apertures through which you can feed the cables: An aperture in the base An aperture in the side If you wish to use the side aperture: – Loosen the fixing screw (9) inside the IP-Module. – Remove the blanking screw from the side cable aperture and screw this into the cable aperture in the base of the unit. 1. Use the drilling template to drill two holes in the ceiling/wall and insert the wall plugs. 2. If IP66 ins
Summary of the content on the page No. 14
Establishing initial communication with the device 7 Establishing initial communication with the device The factory settings for the IP address and subnet mask are 192.168.100.100 and 0.0.0.0 respectively. Communication between the device and the client PC is only possible if both the client PC and the device are located in the same network segment. There are two possible methods of achieving this: Changing the IP address of the client PC. See section 7.1: Changing the IP address of t
Summary of the content on the page No. 15
Establishing initial communication with the device The client PC IP address is now displayed. In this example, we have assumed IP address 10.11.12.13. 3. Type route add 192.168.100.0 mask 255.255.255.0 10.11.12.13 and press the Enter key. The ensuing network route ensures device accessibility. Note that you should enter your own client PC IP address instead of 10.11.12.13. 4. Check that there is communication with the device by typing ping 192.168.100.100. 5. You must now allocate th
Summary of the content on the page No. 16
Checking device accessibility 8 Checking device accessibility Your device is accessed in the network via its IP address. The IP address is either preset at the factory (IP address 192.168.100.100) or set by you when allocating a new IP address to your device. See section 10.1: Changing the device IP address. 1. Type the following command in the your client PC's command prompt screen: 2. ping xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx = 192.168.100.100 if the IP address set by the factory is use
Summary of the content on the page No. 17
Device homepage 9 Device homepage 9.1 Calling up the device homepage There are two ways of calling up the device homepage: Using Internet Explorer Using the Web-Cam IP Manager 9.1.1 Calling up the device homepage using Microsoft Internet Explorer 1. Type the IP address that is allocated to the device in the http address line in Internet Explorer. See section 10.1: Changing the device IP address. e. g.: http://141.73.31.3/ 2. Press the Enter key. The device homepage will be di
Summary of the content on the page No. 18
Device homepage 2. Click on the Start button. The Web-Cam IP Manager program window will now display a list of all the devices available for communication along with their IP addresses and MAC addresses. Each device's IP address or MAC address is unique. 3. Select the device whose homepage you want to call up. 4. Click on the Home page of selected device... button The homepage of the selected device is now called up. See section 9.2: Components of the device homepage. 18 Siemens B
Summary of the content on the page No. 19
Device homepage 9.2 Components of the device homepage Fig. 3 Device homepage 1 Buttons for displaying live video images. See section 15.1: Displaying live video 2 Submenu 3 Language selection list box. Standard setting: English 4 Main menus 5 Display area for live video images. See section 15.1: Displaying live video 19 Siemens Building Technologies Fire Safety & Security Products
Summary of the content on the page No. 20
Configuring network settings 10 Configuring network settings 1. Call up the device homepage. See section 9.1: Calling up the device homepage. 2. Select Network settings in the Configuration menu. The Network settings dialogue window opens: Fig. 4 Network settings 3. Enter the desired settings in this dialogue window. 4. The settings are described in detail below. 5. Click on Save. 6. Restart your IP-Module. See section 14: Restarting the IP Module. The network settings will b
