Shindaiwa EB802 user manual

User manual for the device Shindaiwa EB802

Device: Shindaiwa EB802
Category: Blower
Manufacturer: Shindaiwa
Size: 5.58 MB
Added : 7/12/2013
Number of pages: 60
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Shindaiwa EB802. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Shindaiwa EB802.

For your convenience

If looking through the Shindaiwa EB802 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Shindaiwa EB802 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Shindaiwa EB802 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Shindaiwa EB802 User manual - Online PDF
Advertisement
« Page 1 of 60 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Shindaiwa EB802 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Shindaiwa EB802. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

English .......................1
Español ...............SP_1
Francais ..............FR_1
SHINDAIWA OWNER’S/OPERATOR’S MANUAL
EB802 BLOWER
EB802RT BLOWER
EB802RT
EB802
WARNING!
Minimize the risk of injury to yourself and others! Read this manual
and familiarize yourself with the contents. Always wear eye and hearing
protection when operating this unit.
Part Number 68242-94311 Rev. 6/08

Summary of the content on the page No. 2

Introduction Attention Statements The Shindaiwa blower has been designed Throughout this manual are special Read and follow this manual. and built to deliver superior performance “Attention Statements”. Failure to do so could result and reliability without compromise to in serious injury. quality, comfort, safety, or durability. WARNING! A statement preceded by Wear eye and hearing The information contained in this manual the triangular Attention Symbol and protection at all times during

Summary of the content on the page No. 3

General Safety Instructions Work Safely WARNING! If fuel leaks are evident, stop using the Blowers operate at a very high speed and Minimize the Risk of Fire unit immediately. Fuel leaks must be can do serious damage or injury if they are repaired before using the unit. misused or abused. Never allow a person NEVER smoke or light fires near the unit. ALWAYS move the unit to a place well without training or instruction to operate ALWAYS stop the engine and allow it to away from a fuel sto

Summary of the content on the page No. 4

The Properly Equipped Operator Wear close-fitting clothing to protect legs and arms. Gloves offer added protection and are strongly recommended. Do not wear clothing Wear hearing protection or jewelry that could get caught in machinery when operating this unit. or underbrush. Secure hair so it is above shoulder level. NEVER wear shorts! Always wear eye protection such as a face shield or goggles while operating this unit. Never operate the blower when visibility is poor. Wear a dust

Summary of the content on the page No. 5

Unit Description Stop Switch EB802 Spark Plug Engine Cover Throttle Lever Starter Handle Volute Case Exhaust Outlet Air Cleaner Cover Fuel Tank EB802RT Stop Switch Throttle Lever Throttle Assembly Fuel Filler Cap Swivel Tube Flexible Tube 90° Discharge Tube Figure 3 Specifications Model EB802 EB802RT Dry Weight (without Blower Tubes) 10.4 kg/22.9 lbs 10.3 kg/22.7 lbs Dimensions (L xWxH) 325 x 465 x 545 Engine Type 2 cycle air-cooled gasoline engine, vertical-cylinder Bore & Stroke 49 x

Summary of the content on the page No. 6

Assembly Prior to Assembly Using Figure 3 as a guide, familiarize your- ■ Power unit and blower assembly. ■ Lead wire assembly (anti-static). self with the blower and its components. Carefully inspect all components for damage. ■ Flexible tube, swivel tube, two nozzles Understanding the unit helps ensure top and straight tube. performance, longer service life, and safer IMPORTANT! ■ Handgrip (Non RT unit only). operation. The terms “left”, “left-hand”, “LH”; “right”, ■ Two tube clamps (102

Summary of the content on the page No. 7

Assembly (continued) Assembling the RT Blower IMPORTANT! This unit is equipped with a static dis- charge reduction wire. This wire helps Throttle direct static buildup into the air stream Assembly Swivel reducing the felt amount to the operator. Tube 1. Place the blower upright on the ground or a sturdy work surface and note parts orientation as shown in Figure 7. 2. Remove static wire from package and Flexible Tube fix eyelet to right hand engine cover Long Nozzle (ø74 mm) screw. See Fi

Summary of the content on the page No. 8

Mixing fuel Examples of 50:1 mixing quantities CAUTION! CAUTION! Gasoline 2-cycle mixing oil This engine is designed to operate ■ Never use any type of gasoline liters milliliters on a 50:1 mixture consisting of containing more than 10% alcohol 2.5 - 1 50 ml by volume! Some types of gasoline unleaded gasoline and ISO-L-EGD 5 - 1 100 ml contain alcohol as an oxygenate. or JASO FC class 2-cycle mixing oil 10 - 1 200 ml Oxygenated gasoline may cause only. Use of non-approved mixing 20 - 1 40

Summary of the content on the page No. 9

Starting the Engine WARNING! WARNING! CAUTION! Danger from rotating Danger from thrown dust or The recoil starter can be damaged debris! impeller! by abuse! The impeller will rotate whenever Always wear eye protection when operating this machine! Never direct ■ Never pull the starter cord to its full the blower is operated! Never oper- length! ate this blower unless the intake the blower stream toward people or animals! cover and blower tubes are properly ■ Always engage the starter befor

Summary of the content on the page No. 10

Starting the Engine (continued) If The Engine Does Not Start Repeat the appropriate starting procedures for warm or cold engine. If the engine still will not start, follow the “Starting a Flooded Engine” procedure. Starting A Flooded Engine 1. Disconnect the spark plug lead, and 3. With the spark plug removed, open 5. Repeat the starting procedures for a remove the spark plug (see page 12 for the choke, put the throttle lever in the warm engine. procedures). full throttle position, then cle

Summary of the content on the page No. 11

Throttle Control RT The RT blower is equipped with a multi- func- On the opposite side, a two position “Lim- tion throttle control. The “Cruise” function iter” control allows full engine speed when allows the operator to use a thumb controlled set for “Turbo” or limits the throttle to a lever for constant speed use without using the pre-set engine speed when set to low noise throttle trigger. This is useful for limiting the (dB) setting. fatigue caused from holding the throttle for extended

Summary of the content on the page No. 12

Adjusting The Harness The Shindaiwa blower features an To tighten straps… advanced harness system that helps B B ensure maximum operator comfort and Quick-adjust buckle ease of operation. Comfortable back pads Pull strap ■ The shoulder harness is filled with soft loops padding for reduced operator fatigue. down. ■ The simplified adjustment system makes it easy to match the harness to every body size and type. A To loosen straps… Pull the quick-adjust A buckles up… …and pull the strap

Summary of the content on the page No. 13

Maintenance IMPORTANT! WARNING! WARNING! MAINTENANCE, REPLACEMENT Before performing any Non-standard parts may OR REPAIR OF EMISSION CONTROL maintenance, repair or cleaning work not operate properly with your unit DEVICES AND SYSTEMS MAY BE PER- on the unit, make sure the engine is and may cause damage and lead to FORMED BY ANY REPAIR ESTABLISH- completely stopped. Disconnect the personal injury. MENT OR INDIVIDUAL, HOWEVER, spark plug wire before performing WARRANTY REPAIRS MUST BE PER-

Summary of the content on the page No. 14

Maintenance Every 10/15 Hours 1. Use the spark plug wrench to remove CAUTION! the spark plug. Never allow dirt or debris to enter 2. Clean and adjust the spark plug gap the cylinder bore! Before removing to 0.6mm (0.024”). If the plug must be the spark plug, thoroughly clean the replaced, use a Champion RCJ6Y or spark plug and cylinder head area! equivalent type plug of the correct heat Allow the engine to cool before serv- range. icing the spark plug! Cylinder threads 3. Install the sp

Summary of the content on the page No. 15

Maintenance (Continued) 135-Hour Maintenance Every 135 hours of operation, remove and Muffler clean the muffler. WARNING! Never operate this blower with a damaged or missing muffler or spark arrester! Operating with Arrester Arrester Screen Tail Pipe missing or damaged exhaust com- Screen Cover ponents is a fire hazard, and can also damage your hearing! Remove the Muffler. 1. Use the 4mm hex wrench to remove the five engine cover screws, and then slide the cover from the engine. 2. Use

Summary of the content on the page No. 16

Troubleshooting Guide ENGINE DOES NOT START What To Check Possible Cause Remedy Faulty recoil starter. Does the engine NO Consult with an authorized servicing crank? Fluid in the crankcase. dealer. YES Internal damage. NO Good compression? Loose spark plug. Tighten and re-test. YES Excess wear on cylinder, piston, Consult with an authorized servicing rings. dealer. Does the tank contain NO Fuel incorrect, stale, or Refill with fresh, clean unleaded gasoline fresh fuel of the proper contamin

Summary of the content on the page No. 17

Troubleshooting Guide LOW POWER OUTPUT What To Check Possible Cause Remedy Operator is overworking the unit. Operate at slower rate. Is the engine Carburetor mixture is too lean. Consult with an authorized servicing overheating? dealer. Improper fuel ratio. Refill with clean fresh unleaded gasoline with a pump octane of 87 or higher, mixed with Premium 2-cycle mixing oil at a 50:1 gasoline/oil ratio. Fallen leaves or debris on intake cover.. Clean intake cover.. Fan, fan cover, cylinder fin

Summary of the content on the page No. 18

Troubleshooting Guide ADDITIONAL PROBLEMS What To Check Possible Cause Remedy Clogged air filter. Clean or replace the air filter. Clogged fuel filter. Replace the fuel filter. Poor acceleration. Lean fuel/air mixture. Consult with an authorized servicing dealer. -1 Idle speed set too low. Adjust: 2,000 (±200) min . Ignition switch turned off. Reset the switch and re-start. Fuel tank empty. Refuel. See Fuel section of manual. Clogged fuel filter. Replace fuel filter. Engine stops abruptly.

Summary of the content on the page No. 19

The following statement only applies to United States and its territories Shindaiwa Corporation Federal Emission Design And Defect Limited Warranty Utility And Lawn And Garden Engines Shindaiwa Corporation warrants to the initial purchaser and MAINTENANCE AND REPAIR REQUIREMENTS each subsequent owner, that this utility equipment engine You are responsible for the proper use and maintenance of the engine. (herein engine) is designed, built and equipped to conform at You should keep all receipt

Summary of the content on the page No. 20

NOTES ©2008 Shindaiwa, Inc. Shindaiwa Inc. Shindaiwa Corporation Part Number 68242-94311 11975 S.W. Herman Rd. Head Office: 6-2-11 Ozuka Revision 6/08 Tualatin, Oregon 97062 Nishi, Asaminami-Ku Shindaiwa is a registered trademark Telephone: 503 692-3070 Hiroshima, 731-3167, Japan of Shindaiwa, Inc. Fax: 503 692-6696 Telephone: 81-82-849-2220 Specifications subject to change without notice. www.shindaiwa.com Fax: 81-82-849-2481 20


Alternative user manuals
# User manual Category Download
1 Shindaiwa 68241-94310 User manual Blower 0
2 Shindaiwa 82051 User manual Blower 1
3 Shindaiwa EB2510 User manual Blower 7
4 Shindaiwa 68907-94311 User manual Blower 0
5 Shindaiwa 82050 User manual Blower 0
6 Shindaiwa 68915-94310 User manual Blower 0
7 Shindaiwa 68242-94311 User manual Blower 0
8 Shindaiwa EB3410 User manual Blower 13
9 Shindaiwa EB3410/EVC User manual Blower 6
10 Shindaiwa EB212 User manual Blower 0
11 Shindaiwa EB254 User manual Blower 0
12 Shindaiwa EB344 User manual Blower 0
13 Shindaiwa EB2510/EVC User manual Blower 3
14 Shindaiwa EB344EF13 User manual Blower 0
15 Shindaiwa EB501/EVC User manual Blower 2
16 AEG HG654320NM User manual Blower 2
17 Air King Exhaust Fan AK110 User manual Blower 1
18 Air King Exhaust Fan AK50LS User manual Blower 1
19 Air King AK90 User manual Blower 13
20 Air King Exhaust Fan AK110PN User manual Blower 1