Summary of the content on the page No. 1
Users Guide
Cheetah 10K.7 SCSI
ST3300007LW/LC
ST3146707LW/LC
ST373207LW/LC
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Users Guide Cheetah 10K.7 SCSI ST3300007LW/LC ST3146707LW/LC ST373207LW/LC
Summary of the content on the page No. 4
©2003-2005, Seagate Technology LLC All rights reserved Publication number: 100260915, Rev. D July 2005 Seagate and Seagate Technology are registered trademarks of Seagate Technology LLC. Cheetah, SeaTools, SeaFONE, SeaBOARD, SeaTDD, and the Wave logo are either regis- tered trademarks or trademarks of Seagate Technology LLC. Other product names are regis- tered trademarks or trademarks of their owners. Seagate reserves the right to change, without notice, product offerings or specifications. No
Summary of the content on the page No. 5
Revision status summary sheet Revision Date Sheets Affected Rev. A 03/17/04 1/1, v-viii, 1-83. Rev. B 09/22/04 Pages 9, 12, 1, 18, 25, 26, 28-34, 37, 43, 44, 58, and 87-90 Rev. C 05/05/05 Pages 11, 17, 27, 56, 60, 61, and 62. Rev. D 07/21/05 Pages 4 and 12.
Summary of the content on the page No. 6
Summary of the content on the page No. 7
Contents 1.0 Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Applicable standards and reference documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1.1 Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 8
6.4.1 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6.4.2 Relative humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6.4.3 Effective altitude (sea level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6.4.4 Shock and vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 6.4.5 Air c
Summary of the content on the page No. 9
List of Figures Figure 1. Cheetah 10K.7 SCSI family drive (ST3300007LC shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Figure 2. Typical ST3300007 drive +12 V current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 3. Typical ST3300007 drive +5 V current profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 4. Typical ST3146707 drive +12 V current profile . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 10
viii Cheetah 10K.7 SCSI Product Manual, Rev. D
Summary of the content on the page No. 11
1.0 Scope ® ® This manual describes Seagate Technology LLC, Cheetah 10K.7 SCSI disc drives. Cheetah 10K.7 SCSI drives support the small computer system interface (SCSI) as described in the ANSI SCSI SPI-3 interface specifications to the extent described in this manual. The SCSI Interface Product Manual (part number 75789509) describes general SCSI interface characteristics of this and other families of Seagate drives. From this point on in this product manual the reference to Cheetah 10K.7 SCSI
Summary of the content on the page No. 12
2 Cheetah 10K.7 SCSI Product Manual, Rev. D
Summary of the content on the page No. 13
2.0 Applicable standards and reference documentation The drive has been developed as a system peripheral to the highest standards of design and construction. The drive depends upon its host equipment to provide adequate power and environment in order to achieve opti- mum performance and compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temperature regu- lation. In par
Summary of the content on the page No. 14
2.2 Electromagnetic compliance Seagate uses an independent laboratory to confirm compliance to the directives/standard(s) for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys- tem represents the most popular characteristics for test platforms. The system configurations include: Typical current use microprocessor 3.5-inch floppy disc drive Keyboard Monitor/display Printer External modem Mouse Although the test s
Summary of the content on the page No. 15
2.4 Reference documents Cheetah 10K.7 SCSI Installation Guide Seagate P/N 100260917 Safety and Regulatory Agency Specifications Seagate P/N 75789512 SCSI Interface Product Manual Seagate P/N 75789509 Applicable ANSI small computer system interface (SCSI) document numbers: T10/1143D Enhanced SCSI Parallel Interface (EPI) T10/1416D Primary Commands-2 (SPC-3) T10/1417D SCSI Block Commands (SBC-2) T10/1157D SCSI Architectural Model-2 (SAM-2) T10/1302D SPI-3 (SCSI Parallel Interface version 3) T10/13
Summary of the content on the page No. 16
6 Cheetah 10K.7 SCSI Product Manual, Rev. D
Summary of the content on the page No. 17
3.0 General description Cheetah 10K.7 SCSI drives combine giant magnetoresistive (GMR) heads, partial response/maximum likeli- hood (PRML) read channel electronics, embedded servo technology, and a wide Ultra320 SCSI interface to provide high performance, high ] data storage for a variety of systems including engineering workstations, net- work servers, mainframes, and supercomputers. Ultra320 SCSI uses negotiated transfer rates. These transfer rates will occur only if your host adapter supports
Summary of the content on the page No. 18
Cheetah 10K.7 SCSI drives use a dedicated landing zone at the innermost radius of the media to eliminate the possibility of destroying or degrading data by landing in the data zone. The drive automatically goes to the landing zone when power is removed. An automatic shipping lock prevents potential damage to the heads and discs that results from movement dur- ing shipping and handling. The shipping lock automatically disengages when power is applied to the drive and the head load process begins.
Summary of the content on the page No. 19
3.3 Performance Supports industry standard Ultra320 SCSI interface Programmable multi-segmentable cache buffer (see Section 4.5) 10,000 RPM spindle. Average latency = (3.00) ms Command queuing of up to 64 commands Background processing of queue Supports start and stop commands (spindle stops spinning) 3.4 Reliability Annualized Failure Rate (AFR) of 0.62% LSI circuitry Balanced low mass rotary voice coil actuator Incorporates industry-standard Self-Monitoring, Analysis and Re
Summary of the content on the page No. 20
3.5.1 Programmable drive capacity Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select Parameter List table in the SCSI Interface Product Manual. Refer to the Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive shall not change the capacity it is currently formatted to have. A number in the number of blocks field that is less than the maximum number of LBAs c
