Roadmaster 751428 user manual

Summary of the content on the page No. 1

1-800-669-9690
STOP LIGHT SWITCH BRACKET
INSTALLATION INSTRUCTIONS #751428
#85-3905-01 07-10
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 1-800-669-9690 fax 360-735-9300 www.roadmasterinc.com
1. Start by attaching the stop light switch to the
bracket — follow the separate instructions in-
Fig.A
cluded with this kit.
2. Locate the existing stud under the steering col-
umn (Fig.A).
3. Place the stop light s

Summary of the content on the page No. 2

Stop Light Switch Installation Instructions All specifications are subject to change without notice. ROADMASTER, Inc. • 6110 N.E. 127th Ave. • Vancouver, WA 98682 • 800-669-9690 • Fax 360-735-9300 • roadmasterinc.com nstall this kit if the brake lights do not function when the Iignition is turned to the “tow” position, or if the vehicle is The stop light switch must be installed as directed equipped with a “retained accessory power” feature. above… There are two installation methods — the

Summary of the content on the page No. 3

To wire the switch to the battery… continued from preceding page to the positive terminal on the vehicle’s battery. Note: if the vehicle’s battery must be disconnected for towing and a battery disconnect device has been installed, make certain that the red wire is connect to the positive + side of the battery disconnect device. In this manner, 12V will be present when the battery is disconnected. for BrakeMaster wiring… • Follow steps one through five above. • Using the spade connector